
Microcontroller
bountylabs/blocks-with-screens
It's a Twitterversary block, but with a screen and the internet.

PicoLight is a minimalist adjustable light for low-light photography, based on the Raspberry Pi Pico.
Neopixel studio light is an open-source printed circuit board by Zalmotek, from the Zalmotek/PicoLight repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 52 × 52 mm with 19 parts on 52 nets, routed with 123 tracks and 3 vias.
It is built around the EC11J1524413 and WS2812B-5050RGB. Its parts include 16 diodes and 1 IC. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
✨ PicoLight is a minimalist adjustable light for low-light photography, based on the Raspberry Pi Pico.
✨ For more details check out the project documentation on Hackaday.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | WS2812B5050 | neopixel_studio_light:WS2812B | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13, LED14, LED15, LED16 |
| 1 | EC11J1524413 | neopixel_studio_light:EC11J1524413 | U1 |
| 1 | PINHD-1X2 | neopixel_studio_light:1X02 | JP1 |
| 1 | RPI_PICO-SMD | neopixel_studio_light:RPI_PICO | U$1 |

bountylabs/blocks-with-screens
It's a Twitterversary block, but with a screen and the internet.


FHafting/BREAD
This project is fully documented in the paper: Shane Oberloier, Nicholas G. Whisman, Finn Hafting, Joshua M. Pearce, Open Source Framework for a Broadly Expandable and Reconfigurable Data Acquisition and Automation…

dkjonas/WildWillyR5Hardware
Schematic and board layout for the R5 version of my robot.


atireksd11/Astra-Companion
This repo holds the carrier PCB, the voice stack on the laptop, and notes for building Astra. Week 1 was the KiCad board.

feastorg/Slice_TEMP_NANO_S2L-r1
Template for repos contains BREAD SLICE modules.

feastorg/Slice_TEMP_PICO_S2L-r1
Template for repos contains BREAD SLICE modules.
It measures 52 × 52 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the EC11J1524413 and WS2812B-5050RGB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Zalmotek/PicoLight repository on GitHub, at the commit this page was made from: the board is kicad/neopixel_studio_light/neopixel_studio_light.kicad_pcb and its schematic kicad/neopixel_studio_light/neopixel_studio_light.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).