

Shocksoc Pumpkin
A Pumpkin-shaped lamp using WS2812b LED modules and the cheapest STM32 I could find on Digikey.
- Size
- 98.7 × 98.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 62
- Pads
- 177
- Tracks, vias
- 577, 84
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 31 Jul 2022
- Updated
- 16 Dec 2023
Overview
Shocksoc Pumpkin is an open-source printed circuit board by YorkEngSoc, from the YorkEngSoc/2022-Pumpkin repository on GitHub. It is a 2-layer board of 98.7 × 98.5 mm with 35 parts on 62 nets, routed with 577 tracks and 84 vias.
It is built around the FT231XQ-R, WS2813B-B and BSN20. Its parts include 10 diodes, 7 capacitors, 4 connectors, 4 switches and 3 resistors. It belongs with the STM32 boards of this library.
Main components
3FT231XQ-R
QFN-20-EP(4x4)-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART QFN-20-EP(4x4) USB Converters ROHSFTDIUSB ConvertersWS2813B-B
SMD5050-6P-25℃~+85℃ 0.7mA 1.65mm 3.7V~5.3V 5.4mm 5mm 800Kbit/s B:465nm~475nm、R:620nm~625nm、G:515nm~525nm R:360mcd、G:1150mcd、B:220mcd 集成智能反向连接保护功能 SMD5050-6P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)BSN20
SOT-23-55℃~+150℃ 1 N-channel 1.5V 17.5pF 2.4nC@10V 2.5Ω@10V 300mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHSSlkorMOSFETs
README
README.mdA Pumpkin-shaped lamp using WS2812b LED modules and the cheapest STM32 I could find on Digikey.
The timings are generated - and data fed fast enough - by using the DMA and abusing the SPI (See 2022 Pumpkin Code for details).
Due to component shortages the FTDI USB chip was never fitted or tested by me, although someone told me they tried it and it didn't work - so beware of that.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | WS2813B | Library:LED_WS2813_hand | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 4 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C7 |
| 4 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2, SW3, SW4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C8 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | AP2202K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | BSN20 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J4 |
| 1 | FT231XQ | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U3 |
| 1 | STM32L011F4Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105133-0001 | J1 |
The 34 most common of 35 parts.
Similar boards
- 2 layers80.7 × 95.9 mm

- 4 layers50 × 80 mm

ARGOS DEMO
CNES/argos-demo-board
Demo board designed to use the ARRIBADA SMD module via USB to send ARGOS messages to the Kineis constellation.
91 parts7CERN-OHL-S-2.0 - 2 layers301.2 × 96.4 mm

- 4 layers230 × 230 mm

- 4 layers260.6 × 260 mm

- 2 layers110.3 × 161.1 mm

SixteenSegClock Main
W0EEE/Seven-Segment-Mission-Clock
Mission Clock: Days, Hours, Minutes, Seconds
54 partsGPL-3.0 - 2 layers75 × 55 mm

Tinkerforge rgb led matrix v2 bricklet rgb led matrix v2
oomlout/oomlout_oomp_project_bot_v_2
160 parts - 6 layers141.1 × 178.5 mm

Questions
How big is the Shocksoc Pumpkin PCB?
It measures 98.7 × 98.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shocksoc Pumpkin use?
35 parts, built around the FT231XQ-R, WS2813B-B and BSN20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shocksoc Pumpkin KiCad files?
From the YorkEngSoc/2022-Pumpkin repository on GitHub, at the commit this page was made from: the board is Shocksoc-Pumpkin.kicad_pcb and its schematic Shocksoc-Pumpkin.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shocksoc Pumpkin design in my own project?
Its repository states no licence, so its author keeps all rights: ask YorkEngSoc before reusing the design.