

TurnSignal split
- Size
- 32.8 × 34.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 20
- Pads
- 73
- Tracks, vias
- 122, 26
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Jun 2025
- Updated
- 27 Jun 2025
Overview
TurnSignal split is an open-source printed circuit board by YingK8, from the YingK8/Turn-Signal repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 32.8 × 34.3 mm with 23 parts on 20 nets, routed with 122 tracks and 26 vias.
It is built around the MIC5365-3.3YC5-TR, TL2230EEF100 and B2B-PH-K-S(LF)(SN). Its parts include 6 resistors, 5 connectors, 4 capacitors, 2 ICs and 2 diodes.
Main components
3MIC5365-3.3YC5-TR
SC-70-5-40℃~+125℃ 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 65dB@(10kHz)、80dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTL2230EEF100
插件100mA 1N 30V Black DPDT Latching PC Pin Rectangular Plunger Through Hole 插件 Pushbutton Switches ROHSE-SwitchPushbutton SwitchesB2B-PH-K-S(LF)(SN)
插件,P=2mm-25℃~+85℃ 1 100V 1x2P 2 2A 2P 2mm 4.5mm 5.9mm 6mm Brass K Pin PA66 PH Through Hole Tin UL94V-0 White 插件,P=2mm Wire To Board Connector ROHSJSTWire To Board Connector
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6 |
| 4 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J2, J3, J3 |
| 2 | 0 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | EN1, EN2 |
| 2 | 10k | 3362P_1_103LF-2 2:TRIM_3362P-1-103LF | R1, R2 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | LED | LED_THT:LED_D10.0mm | D1, D2 |
| 2 | TL2230EEF100 | TL2230EEF100-2:SW_TL2230EEF100 | S4, S5 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 470uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | B2B-PH-K-S_LF__SN_ | digikey-footprints:PinHeader_1x2_P2mm_Drill1mm | J1 |
| 1 | LM555xM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MIC5365-3.3YC5 | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U2 |
More from YingK8/Turn-Signal
4- 2 layers61.4 × 19.6 mm

- 2 layers24.3 × 35.1 mm
button.kicad_pcb.jpg?size=s&soon)
- 2 layers62.9 × 94.8 mm

- 2 layers30.7 × 49.3 mm

Similar boards
- 4 layers24.4 × 24.4 mm

OSO SWAT C1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
40 parts2.1k - 4 layers45 × 63.5 mm

- 2 layers335 × 340.9 mm

RCA Radio Telescope
Glaubinator/Radio-Telescope-RCA
Radio Telescope System for 1 GHz to 2 GHz Operation
81 parts3GPL-3.0 - 4 layers80 × 100 mm

Ice40 breakout
RubenVoell/iceduino
The basic idea behind this project is to create a simple breakout of an ICE40 FPGA with some LEDs and Buttons to interact with the FPGA and enough resources to run a simple softcore, like a small RISC-V core.
248 parts3 - 4 layers70 × 30 mm

Usb led controller
kcuzner/usb-led-controller
This is an LED controller for the lights that came with my In-Win A1 Mini-ITX Tower. It came with a simple 12V RGB LED strip, rather than the now-standard WS2812 addressable LED strips that are so common in today's PCs.
115 parts2 - 4 layers115 × 75 mm

- 2 layers81 × 127 mm

RPNCalcProject
aydenschmidtnd/RPNCalcProject
Due to the cost of reverse polish notation (RPN) calculators, I wanted to make the attempt at creating one myself.
103 parts1 - 2 layers45.7 × 43.2 mm

D21Debug
glingy/playground
This repository contains the development kit for building code for the Atmel SAM D21 playground board. This board was developed to help members of the Solar Car Club (Prisum) at Iowa State University to learn how to…
63 parts1
Questions
How big is the TurnSignal split PCB?
It measures 32.8 × 34.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TurnSignal split use?
23 parts, built around the MIC5365-3.3YC5-TR, TL2230EEF100 and B2B-PH-K-S(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TurnSignal split KiCad files?
From the YingK8/Turn-Signal repository on GitHub, at the commit this page was made from: the board is TurnSignal_split.kicad_pcb and its schematic TurnSignal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TurnSignal split design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).