Skip to the content
2 layersCanSat, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
76
Pads
129
Tracks, vias
138, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 Sep 2025
Updated
27 Jul 2026

Overview

CanSat is an open-source printed circuit board by YaelRoman, from the YaelRoman/Pipiolos repository on GitHub. It is a 2-layer board with 23 parts on 76 nets, routed with 138 tracks and 0 vias.

It is built around the BME280 and MPU-6500. Its parts include 14 connectors, 6 ICs, 1 resistor, 1 diode and 1 switch. It belongs with the ESP32 boards of this library.

Main components

2

Parts

23
QtyValueFootprintReferences
1BME280MyLibrary:BME280U5
1BME_XH2.54_HConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ4
1BME_XH2.54_MConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ3
1BatteryI2C_XH2.54_HConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ14
1BatteryI2C_XH2.54_MConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ13
1Battery_XH2.54_HConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ12
1Battery_XH2.54_MConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ11
1ESP32_DevKit_V1Library:esp32_devkit_v1_doitU1
1GPS_XH2.54_HConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ6
1GPS_XH2.54_MConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ5
1LED_TestigoConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalD1
1LiPoBoostI2CMyLibrary:LiPoBoostI2CU6
1LoRa Ra-02MyLibrary:LoRa Ra-02U2
1LoRa1_XH2.54_HConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ8
1LoRa1_XH2.54_MConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ7
1LoRa2_XH2.54_HConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ10
1LoRa2_XH2.54_MConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ9
1MPU-6500MyLibrary:MPU-6500U4
1MPU_XH2.54_HConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ2
1MPU_XH2.54_MConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ1
1NEO6MV2 GPSMyLibrary:NE06MV2 GPSU3
1R_330OhmResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1SW_PowerConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalSW1

Similar boards

  • 2 layers57.6 × 40 mmMushak pcb, the printed circuit board in 3D

    Mushak pcb

    gautam-dev-maker/mushak

    It is a Micromouse, maze solving bot.

    117 parts62MIT
  • 4 layers55 × 97 mmMelodio SelfMate V2, the printed circuit board in 3D

    Melodio SelfMate V2

    zeeblaze/Melodio-SelfMate

    Your Ultimate Portable Music Companion For Home Automation.

    121 parts53
  • 2 layers96 × 74.4 mmMonolith, the printed circuit board in 3D

    Monolith

    luftaquila/monolith

    DIY wireless real-time datalogging platform for Student Formula and Baja.

    138 parts45
  • 2 layers76 × 99.9 mmMain pcb, the printed circuit board in 3D

    Main pcb

    kyletyni/mercury

    ESP32 based Micromouse source code and PCB files

    122 parts10
  • 2 layers60 × 50 mmSaposenBoard, the printed circuit board in 3D

    SaposenBoard

    hide4096/SaposenBoard

    85 parts2
  • 2 layers32.8 × 53.6 mmHermes, the printed circuit board in 3D

    Hermes

    MeghanaM4/Hermes

    make a PCB with an on-board sensor to transmit data via I2C, get the money to build it

    10 parts2MIT
  • 2 layers100 × 100 mmCopperPilotDrone, the printed circuit board in 3D

    CopperPilotDrone

    CopperPilot/CopperPilotDronePCB

    Flight controller and airframe on one ESP32-S3 board. Fly it from any phone over its own Wi-Fi. Motor traces sized to IPC-2221 for about 3 A.

    109 parts1
  • 4 layers133.1 × 115.3 mmMad Bot, the printed circuit board in 3D

    Mad Bot

    Incomprehensible/Mad_Bot

    Exploratory project in Embedded and Multi-Agent Robotics

    95 parts1MIT

Questions

What parts does the CanSat use?

23 parts, built around the BME280 and MPU-6500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CanSat KiCad files?

From the YaelRoman/Pipiolos repository on GitHub, at the commit this page was made from: the board is CanSat/CanSat.kicad_pcb and its schematic CanSat/CanSat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CanSat design in my own project?

Its repository states no licence, so its author keeps all rights: ask YaelRoman before reusing the design.