Skip to the content
2 layers58.4 × 50.8 mmPcb1, the printed circuit board in 3D

GPS N2K 25 Hz et passerelle NMEA0183 Wifi

Size
58.4 × 50.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
63
Pads
140
Tracks, vias
413, 44
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Mar 2021
Updated
25 Nov 2024

Overview

Pcb1 is an open-source printed circuit board by Xtra-Large, from the Xtra-Large/GpsN2KWifiGateaway repository on GitHub, published under the MIT licence. It is a 2-layer board of 58.4 × 50.8 mm with 26 parts on 63 nets, routed with 413 tracks and 44 vias.

It is built around the ESP32-WROOM-32U, MAX3232CDR and SN65HVD232DR-JSM. Its parts include 9 capacitors, 5 ICs, 4 resistors, 3 diodes and 1 connector. It belongs with the radio and wireless boards and the ESP32 boards of this library.

Main components

3

README

README.md

Vue 3D

GpsN2KWifiGateaway

Ce projet est encore en développement, n'hésitez pas à participer!

Présentation

L'objectif initial de ce projet etait de disposer d'un GPS NMEA 2000 ayant une fréquence de rafraichissement d'au moins 10Hz pour l'intégrer dans notre Archambault A31 (https://epsilon3dsailingteam.fr/).

Il semble que les pilotes automatiques intègrent les données GPS pour effectuer des corrections de trajectoire.

Les GPS Ublox M8N (assez peu couteux) permettent, apèrs configuration, d'obtenir ces taux de rafraichissement en étant mono constellation. Le nouveelles puces M9N permettent d'obtenir un taux de rafraichissement de 25Hz en exploitant les 4 constellations (GPS, Glonass, Galiléo et Baidoo).

Projet

Le projet est constitué :

  • Une partie électronique constituée :
  • Un boitier à imprimer en 3D (en cours)
  • Le code source du projet

Le code source peut être ouvert avec l'IDE Arduino et le projet électronique avec kiCAD

Librairies externes utilisées

Le code source utilise ces librairies, sous licence MIT elles aussi :

Fonctions implémentées

Actuellement le projet permet :

  • D'injecter sur le réseau NMEA2000 les données de la puce GPS a la fréquence de 20Hz (25Hz possible, a voir l'intérêt)
  • Se connecter à un réseau Wifi existant
  • Creer un point d'accès Wifi
  • Lire les données du réseau NMEA2000, les convertir en MNEA0183 et les router vers : -- 3 ports série -- Wifi en TCP et en UDP

RoadMap

  • Page Web de configuration visualisation
    • Ajout du serveur de configuration Wifi pour configuration sur un routeur externe
    • Ajout de fonction AJAX/JSON pour rechargement de la page de statut
    • Mise en une seule page pour intégrer la fonction de MAJ du firmware
    • Ajout d'option pour activer certaines redirections vers les ports et le reseau (a stocker en NVS)
    • Mise en page et logo
    • Configuration des ports de sortie serie : Msg NMEA, vitesse, activation...
    • Configuration du SSID externe + PWD

Parts

26
QtyValueFootprintReferences
50.1uFCapacitor_SMD:C_0603_1608MetricC2, C3, C4, C5, C7
210kohmResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR2, R4
1100MHz 6AResistor_SMD:R_1206_3216MetricFB1
110uFCapacitor_SMD:C_0603_1608MetricC8
1120ohmResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR3
12.2uFCapacitor_SMD:C_0603_1608MetricC9
1220ohmResistor_SMD:R_0402_1005MetricR1
1330uFCapacitor_SMD:CP_Elec_10x10C6
1470UFCapacitor_SMD:CP_Elec_10x10C1
147uHInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL1
1Conn_01x12TerminalBlock_TE-Connectivity:TerminalBlock_TE_1-282834-2_1x12_P2.54mm_HorizontalJ1
1D_1N5819Diode_SMD:D_SOD-123D1
1D_SchottkyDiode_SMD:D_SMAD3
1ESP32-WROOM-32URF_Module:ESP32-WROOM-32UU5
1GreenLED_SMD:LED_0603_1608MetricD2
1MAX3232CDRPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU2
1MISO/TXJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP2
1MOSI/RXJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1SN65HVD232DRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU4
1SparkfunM9NDronotique:AdafruitGPSM9NU3
1XLSEMI XL1509-3.3E1Package_SO:SOP-8_3.9x4.9mm_P1.27mmU1

Similar boards

  • 2 layers48.3 × 123.8 mmAltimeter v2, the printed circuit board in 3D

    Altimeter v2

    pimbongaerts/altimeter

    Underwater sonar/USBL interface for photogrammetry surveys. PCB design files and Arduino code.

    74 parts4
  • 4 layers85 × 100 mmRTK GPS Board Rev0, the printed circuit board in 3D

    RTK GPS Board Rev0

    rtymk/RT_Open_GPS_Board

    Open source RTK GPS board for agricultural applications. LC29HEA GNSS reciever, E22 -900m33s LoRa Radio, 1x RS232 Out, 1x RS232 In, 2x CAN Trasncievers

    111 partsMIT
  • 2 layers55 × 85 mmYatnc, the printed circuit board in 3D

    Yatnc

    solmorth/YetAnotherTNC

    Modern APRS TNC with Bluetooth and Zigbee connectivity for seamless mobile and IoT integration.

    44 parts
  • 4 layers70 × 45 mmEmanresu G431, the printed circuit board in 3D

    Emanresu G431

    EmanresuEmanreztuneb/SimpleFOC_G431_Motordriver

    A motordriver based in STM's G431 Drone ESC.

    112 parts3
  • 4 layers102.5 × 45 mmESC v2, the printed circuit board in 3D

    ESC v2

    nikphillydev/NP1_DRONE

    Building a quadcopter from scratch. Hardware and software. Developed using STM32 microcontroller and FreeRTOS.

    150 parts3MIT
  • 4 layers46.8 × 52.4 mmVORTAC, the printed circuit board in 3D

    VORTAC

    FoCTow/ToolchangerDevelopment

    Overcomplicated 3D Printer Design

    146 parts2
  • 2 layers47 × 55.5 mmMotor master, the printed circuit board in 3D

    Motor master

    PaulBailey-1/motor-master

    The board can also be connected to motors through the CAN bus. Connect one end of the CAN chain to the CAN connector on the board and the other end to the TERM connector, or use another termination resistor.

    52 parts1

Questions

How big is the Pcb1 PCB?

It measures 58.4 × 50.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pcb1 use?

26 parts, built around the ESP32-WROOM-32U, MAX3232CDR and SN65HVD232DR-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb1 KiCad files?

From the Xtra-Large/GpsN2KWifiGateaway repository on GitHub, at the commit this page was made from: the board is electronic/pcb1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb1 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).