2 layers68 × 42.5 mm
WT32SC01 wifi poe
austinscreations/WT32-SC01_POE
a custom POE shields designed for the WT32-SC01 esp32 enabled touch screen display
12 parts5GPL-3.0
6 layers203.2 × 101.6 mm
Hub-2.0
WindingMotor/Hub-2.01VCU Ram Racing FSAE Distribution Hub V2
- Size
- 203.2 × 101.6 mm
- Copper layers
- 6
- Thickness
- 1.53 mm
- Parts
- 51
- Nets
- 81
- Pads
- 225
- Tracks, vias
- 69, 510
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Oct 2026
- Updated
- 6 Nov 2026
Overview
Hub-2.0 is an open-source printed circuit board by WindingMotor, from the WindingMotor/Hub-2.0 repository on GitHub. It is a 6-layer board of 203.2 × 101.6 mm with 51 parts on 81 nets, routed with 69 tracks and 510 vias.
It is built around the YQ506-S-112DM, DT15-12PA and R-RJ45S08P-B000. Its parts include 14 capacitors, 12 diodes, 8 resistors, 4 ICs and 4 connectors.
Main components
3
YQ506-S-112DM
插件,15.5x12.2mmAutomotive RelaysYONGNENG
DT15-12PA
插件,P=1.45mm-55℃~+125℃ 12P 13A 2 250V 2x6P 4.44mm 6 Copper alloy Gray Tin UL94V-0 插件,P=1.45mm Wire To Board Connector ROHSTE ConnectivityWire To Board Connector
R-RJ45S08P-B000
插件0℃~+70℃ 1 16.5mm 16.7mm 16mm Gold Harpoon Contact (Plastic) Non-LED Non-PoE Phosphor Bronze RJ45 Jack Shielded Through Hole Plugin Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSCkmtwEthernet Connectors / Modular Connectors (RJ45 RJ11)
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N5399 | Diode_THT:D_DO-15_P10.16mm_Horizontal | D4, D5, D6, D10, D12, D13, D14, D15 |
| 7 | 100n | EasyEDA:CAP-TH_L5.0-W2.5-P5.00-D1.0 | C2, C4, C6, C11, C12, C13, C15 |
| 7 | 10u | EasyEDA:CAP-TH_L5.5-W3.8-P5.08-D0.5 | C1, C3, C5, C8, C9, C10, C14 |
| 4 | 10k | EasyEDA:RES-TH_BD2.5-L6.5-P10.50-D0.6 | R4, R5, R6, R10 |
| 4 | 660 | EasyEDA:RES-TH_BD2.4-L6.3-P10.30-D0.6 | R7, R8, R9, R11 |
| 4 | Fuse | EasyEDA:FUSE_3568 | F0, F1, F2, F3 |
| 4 | LED | EasyEDA:LED-TH_BD3.0-P2.54-FD_YELLOW | D7, D8, D9, D11 |
| 4 | YQ506-S-112 DM | EasyEDA:RELAY-TH_YQ506-S-112DM | U1, U2, U3, U4 |
| 3 | DT15-12PA | EasyEDA:CONN-TH_DT15-12PA | CN1, CN2, CN3 |
| 1 | +12V_BATT_LUG | EasyEDA:1_4_Lug | LUG1 |
| 1 | +12V_STARTER_RELAY | EasyEDA:1_4_Lug | LUG4 |
| 1 | 6437288-3-MODIFIED | EasyEDA:DSUB-60P_SUPERSEAL | CN4 |
| 1 | GND_ENGINE_CHASSIS_LUG | EasyEDA:1_4_Lug | LUG3 |
| 1 | GND_LUG | EasyEDA:1_4_Lug | LUG2 |
| 1 | R-RJ45S08P-B000 | EasyEDA:RJ45-TH_R-RJ45S08P-B000 | RJ1 |
Similar boards
- 2 layers194 × 123.2 mm
- 2 layers132 × 56 mm
Dashboard
marcutudor79/electronic-module-for-the-dashboard-of-upbdrive-racing-car
My Bachelor's degree that consists of the electronic module for the Formula Student race car and it's testing module
127 partsApache-2.0 - 6 layers49.5 × 48.6 mm
- 6 layers40 × 40 mm
- 6 layers110 × 80 mm
Hv7355 tile
ryancinsight/kwavers
K-wave inspired ultrasound physics in rust with acoustics and optics
51 parts7MIT - 6 layers14 × 8 mm
- 6 layers51.7 × 27.8 mm
STM32-Pill
HasanTheSyrian/stm32-bluetooth-pill
STM32 Black-pill inspired development board that supports Bluetooth
51 parts1
Questions
How big is the Hub-2.0 PCB?
It measures 203.2 × 101.6 mm and has 6 copper layers, 1.53 mm thick.
What parts does the Hub-2.0 use?
51 parts, built around the YQ506-S-112DM, DT15-12PA and R-RJ45S08P-B000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hub-2.0 KiCad files?
From the WindingMotor/Hub-2.0 repository on GitHub, at the commit this page was made from: the board is Hub-2.0.kicad_pcb and its schematic DASH.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hub-2.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask WindingMotor before reusing the design.