
Foxhunt1
gx1400/kicad_foxhunt_batterytest
Custom amateur radio fox hunt (hidden transmitter) controller, aimed at being a flexible, dynamic platform for a wide range of fox-hunt formats — not just a fixed single-mode beacon.

Programming and KiCad files for LinkLite v2: a modular lighting system with wireless control and syncing.
Linklite v2 is an open-source printed circuit board by WeasalCrafter, from the WeasalCrafter/linklite-v2 repository on GitHub, published under the MIT licence. It is a 4-layer board of 150 × 40 mm with 116 parts on 83 nets, routed with 453 tracks and 229 vias.
It is built around the TPS563201DDCR, CH221K and ESP32-C6-MINI-1, with the USBLC6-2P6, JK-SMD300L-24V and AO3400A among its other parts. Its parts include 47 resistors, 33 diodes, 13 capacitors, 6 ICs and 4 switches. It belongs with the ESP32 and RISC-V boards of this library.
A modular ESP32-C6 based room light that syncs brightness via ESP-NOW
See my post on my Website
My dorm room lights are terrible in college, so I decided to make my own. LinkLite is the idea of a modular lighting system that lives locally and not in the cloud while allowing for wireless control and syncing.
This is the second version of LinkLite, completely redesigned. This time with a custom PCB and much increased brightness.
These are the major libraries I used in the programming in the project:
The PCB project files can be found under kicad/linklite_v2
linklite-v2
├── data
├── kicad
│ └── linklite_v2
├── linklite-bar
├── linklite-controller
├── temperature_logger
├── README.md
├── CLAUDE.md
└── LICENSE.txtThe arduino sketches for the linklite-bar, linklite-controller, and temperature_logger can be found under their respective folders, and my data collected can be found in the data folder along with the MATLAB script for plot generation.
Logan Fick - loganfickcontact@gmail.com
Project Link: https://github.com/weasalcrafter/linklite-v2
Website: https://loganfick.com/
These are the tools I used for this project for designing the schematic, PCB layout, and programming.
This project is licensed under the MIT License - see the LICENSE file for details.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 5.6 | Resistor_SMD:R_0603_1608Metric | R1, R17, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32 +12 |
| 28 | JTLMS3 | EasyEDA2KiCad:LED-SMD_L3.5-W2.8-FD-2835_WHITE | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED21, LED22, LED23, LED25 +12 |
| 8 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R7, R8, R9, R10, R16, R48, R49 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R5, R18 |
| 2 | 10uF 25V | Capacitor_SMD:C_0805_2012Metric | C15, C16 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C9 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C6, C13 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | JK-SMD300L-24V | EasyEDA2KiCad:F2920 | F3, F4 |
| 1 | 0.1uF 25V | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 0.1uF 25V | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 130 | Resistor_SMD:R_0603_1608Metric | R51 |
| 1 | 160 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 180 | Resistor_SMD:R_0603_1608Metric | R50 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 33.2K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | BOOT | EasyEDA2KiCad:KEY-SMD_B3U-1000PM | SW5 |
| 1 | BZV55B10 | Diode_SMD:D_MiniMELF | D3 |
| 1 | CH221K | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x11_Pin | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Horizontal | J3 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U2 |
| 1 | G7P03L | EasyEDA2KiCad:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | Q2 |
| 1 | JVS25V100M6X4 | EasyEDA2KiCad:CAP-SMD_BD6.3-L6.6-W6.6-LS7.3-FD_JVS25V100M6X4 | C10 |
| 1 | LOGO | LOGO | G*** |
| 1 | MHCI06030-3R3M-R8 | EasyEDA2KiCad:IND-SMD_L7.3-W6.6 | L1 |
| 1 | PD LED RED | EasyEDA2KiCad:LED0603-RD_RED | LED33 |
| 1 | PWR IN | EasyEDA2KiCad:CONN-SMD_2060-452 | U8 |
| 1 | PWR LED GREEN | EasyEDA2KiCad:LED0603-RD_RED | LED36 |
| 1 | PWR OUT | EasyEDA2KiCad:CONN-SMD_2060-452 | U6 |
| 1 | RESET | EasyEDA2KiCad:KEY-SMD_B3U-1000PM | SW6 |
| 1 | SMCJ15A-13-F | EasyEDA2KiCad:SMC_L7.1-W6.2-LS8.1-FD | D4 |
| 1 | TPS563201DDCR | EasyEDA2KiCad:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U7 |
| 1 | TYPE-C-31-M-12 | EasyEDA2KiCad:USB-C_SMD-TYPE-C-31-M-12_1 | USBC1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U3 |
| 1 | USR 1 | EasyEDA2KiCad:KEY-SMD_B3U-1000PM | SW1 |
| 1 | USR 2 | EasyEDA2KiCad:KEY-SMD_B3U-1000PM | SW2 |
| 1 | USR LED BLUE | EasyEDA2KiCad:LED0603-RD_RED | LED35 |

gx1400/kicad_foxhunt_batterytest
Custom amateur radio fox hunt (hidden transmitter) controller, aimed at being a flexible, dynamic platform for a wide range of fox-hunt formats — not just a fixed single-mode beacon.


Kazenzi/The-robotic-farmer
Click the Youtube Thumbnail below for a youtube demo video:

AJXD2/carplay-project
One board that turns the Pi 4 + 7" screen into a complete car radio replacement. It bolts onto the Pi like a HAT, plugs into the truck's radio harness, and does everything the factory radio did plus what the Pi needs:

alph4345/test
TrinketCore puts everything a small rechargeable gadget needs on one 40 × 60 mm board, ready to order assembled from PCBWay:

Diode663/USBC_M2E_HaLow_Adapter
USB-C (USB 2.0) to M.2 Key-E carrier for the Gateworks GW16170 Wi-Fi HaLow card. KiCad 10, generated from Python, Rev A sent to JLCPCB.

HeyPCB/whisker
Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.

It measures 150 × 40 mm and has 4 copper layers, 1.6 mm thick.
116 parts, built around the TPS563201DDCR, CH221K, ESP32-C6-MINI-1 and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the WeasalCrafter/linklite-v2 repository on GitHub, at the commit this page was made from: the board is kicad/linklite_v2/linklite_v2.kicad_pcb and its schematic kicad/linklite_v2/_restore_backup_2026-07-05T09-54-20-805/linklite_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).