

STM32 INDUSTRIAL IOT
- Size
- 81 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 69
- Pads
- 256
- Tracks, vias
- 795, 146
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Apr 2026
- Updated
- 29 Apr 2026
Overview
STM32 INDUSTRIAL IOT is an open-source printed circuit board by WasikeIsaac, from the WasikeIsaac/STM32-INDUSTRIAL-IOT-PCB repository on GitHub. It is a 2-layer board of 81 × 52 mm with 45 parts on 69 nets, routed with 795 tracks and 146 vias.
It is built around the W25Q128JVPIQ and MPU-9250. Its parts include 21 capacitors, 9 resistors, 4 ICs, 4 connectors and 3 switches. It belongs with the home automation and IoT boards and the STM32 boards of this library.
Main components
2W25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASHMPU-9250
QFN-24-EP(3x3)-40℃~+85℃ 2.4V~3.6V 8uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometers
README
README.mdSTM32-INDUSTRIAL-IOT-PCB
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C12, C13, C18, C19 |
| 5 | 4k7 | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R7 |
| 4 | 50p | Capacitor_SMD:C_0603_1608Metric | C14, C15, C16, C17 |
| 3 | 10n | Capacitor_SMD:C_0603_1608Metric | C8, C9, C10 |
| 3 | SW_SPST | Button_Switch_SMD:SW_SPST_EVQQ2 | SW1, SW2, SW3 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | 3.3u | Capacitor_SMD:C_0805_2012Metric | C20, C21 |
| 2 | Conn_01x26 | Connector_PinHeader_2.54mm:PinHeader_1x26_P2.54mm_Vertical | J1, J2 |
| 2 | Crystal_GND23 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 1k1 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | LT1129-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | MPU-9250 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U2 |
| 1 | STM32L476RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J4 |
| 1 | W25Q128JVP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U3 |
Similar boards
- 2 layers74.4 × 30 mm

- 2 layers35 × 38.4 mm

Handgelenk
Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...
61 parts233 - 2 layers100 × 74 mm

- 4 layers70 × 80 mm

- 4 layers42 × 83.9 mm

StratoSoar MK2.2
crnicholson/StratoSoar-MK2
StratoSoar is an engineering project that aims to be able to fly a glider (dropped from a high-altitude balloon), down to any selected coordinates.
116 parts24 - 2 layers187 × 152 mm

Kiss masterboard
squarewavedot/ledcubeelectronics
LEDCube battery and masterboard electronics
163 parts22 - 2 layers49.3 × 19.7 mm

FineMotion-5
Kamilake/FineMotion-Tracker
ESP8266 Motion Capture Full-Body Tracker for SlimeVR
43 parts16CERN-OHL-P-2.0 - 2 layers146 × 100 mm

LoliBot
CCHS-Melbourne/LoliBot
Welcome to the 2018 linux.conf.au Open Hardware Project. You can see information about this and other MiniConfs at .
42 parts13
Questions
How big is the STM32 INDUSTRIAL IOT PCB?
It measures 81 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32 INDUSTRIAL IOT use?
45 parts, built around the W25Q128JVPIQ and MPU-9250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32 INDUSTRIAL IOT KiCad files?
From the WasikeIsaac/STM32-INDUSTRIAL-IOT-PCB repository on GitHub, at the commit this page was made from: the board is STM32_INDUSTRIAL_IOT.kicad_pcb and its schematic STM32_INDUSTRIAL_IOT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32 INDUSTRIAL IOT design in my own project?
Its repository states no licence, so its author keeps all rights: ask WasikeIsaac before reusing the design.