2 layers47.5 × 67.5 mm
Microphone preamp
polykit/microphone-preamp
Schematics and PCB for a microphone preamp with phantom power
47 parts16
2 layers
TransducerDriver
WPIRoboticsProjects/Lionfish-AcousticLink1This is the repo for acoustic modem and localization from acoustic modem
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 26
- Pads
- 72
- Tracks, vias
- 24, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Oct 2019
- Updated
- 18 May 2020
Overview
TransducerDriver is an open-source printed circuit board by WPIRoboticsProjects, from the WPIRoboticsProjects/Lionfish-AcousticLink repository on GitHub. It is a 2-layer board with 25 parts on 26 nets, routed with 24 tracks and 0 vias.
It is built around the INA217AIP and IRF540N. Its parts include 7 resistors, 4 capacitors, 3 ICs, 3 connectors and 2 diodes.
Main components
2README
readme.mdThis is the repo for acoustic modem and localization from acoustic modem
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1u | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4 |
| 2 | 101 | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R8 |
| 2 | 4K | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R6, R7 |
| 2 | BattJack | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J2, J3 |
| 2 | Crystal | Wire_Connections_Bridges:WireConnection_2.50mmDrill | Y1, Y2 |
| 2 | INA217 | Housings_DIP:DIP-8_W7.62mm | U1, U2 |
| 2 | IRF540N | TO_SOT_Packages_THT:TO-220-3_Vertical | Q3, Q4 |
| 1 | 0.01 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | Rshut3 |
| 1 | 10nF | Capacitors_THT:C_Disc_D8.0mm_W5.0mm_P7.50mm | C2 |
| 1 | 159nF | Capacitors_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 1Kohm | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R11 |
| 1 | 1N4007 | Diodes_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D2 |
| 1 | 1N4148 | Diodes_THT:D_5W_P12.70mm_Horizontal | D1 |
| 1 | 2Khom | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R10 |
| 1 | 530 | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R9 |
| 1 | ModSigJack | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | TC427 | Housings_DIP:DIP-8_W7.62mm_LongPads | U3 |
| 1 | Transformer_SP_1S 1:10 | Transformers_THT:Transformer_Toroid_Tapped_Horizontal_D14.0mm_Amidon-T50 | T2 |
Similar boards
- 2 layers66.7 × 55.6 mm
OS MPS Preamp V2 OnlyINA
OS-MPI/MPS
The MPS system is a particle characterizing apparatus designed by the MIT/MGH group
53 parts17GPL-3.0 - 2 layers64 × 36.1 mm
- 2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers124.5 × 77.5 mm
- 2 layers55 × 90.8 mm
- 2 layers73.7 × 61 mm
- 2 layers
Questions
What parts does the TransducerDriver use?
25 parts, built around the INA217AIP and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TransducerDriver KiCad files?
From the WPIRoboticsProjects/Lionfish-AcousticLink repository on GitHub, at the commit this page was made from: the board is TransducerDriver/TransducerDriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TransducerDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask WPIRoboticsProjects before reusing the design.