
LED Matrix Display Badge
0xlama/ATtiny_LED_Matrix_Display_Badge
An ATtiny85 based badge size PCB that can display alphabets and numbers .

This is a simple quad XOR gate (74HC86) that is controlled by 8 key switches and outputs to 4 LEDS, all powered by a coin cell battery. This is implemented in KiCAD.
Xor gate toy is an open-source printed circuit board by VolcanoKing370, from the VolcanoKing370/xor-gate-toy repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 132.1 × 53.3 mm with 27 parts on 20 nets, routed with 156 tracks and 8 vias.
It is built around the 74HC86D and BS-7. Its parts include 12 resistors, 8 switches, 4 diodes and 1 IC.
This is a simple quad XOR gate (74HC86) that is controlled by 8 key switches and outputs to 4 LEDS, all powered by a coin cell battery. This is implemented in KiCAD.
I wanted to challenge myself by designing a simple PCB without having to follow any YouTube tutorials. This means that I force myself to not copypasta whatever the tutorial did.
Congratulations! Now your PCB should like like this:

Now you might be wondering, how do I get this manufactured by OshKosh, PCBWay, JLC, etc? This is just a dollar-store 3D model!
It's surprisingly easy! First, you must go to File > Fabrication Outputs > Gerbers(.gbr)...

Now, assuming that the design passes the Design Rule Check (DRC), you should hit Plot, which should generate the Gerber files. Then click Generate Drill Files... to generate the drill files (PCB manufacturing involves drilling holes after all! Especially for through hole parts.)

Then continue and click Generate Drill File

Now that your Gerber and Drill files are generated, go to your homepage and you should see the following files.

Now you can zip them and upload the .zip file to your manufacturer of choice! Congratulations!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, RLED1, RLED2, RLED3, RLED4 |
| 8 | SW_Push | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 4 | LED | LED_THT:LED_D3.0mm | LED1, LED2, LED3, LED4 |
| 1 | 74HC86 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | BS-7 | digikey-footprints:Battery_Holder_Coin_2032_BS-7 | BAT1 |
| 1 | SW_SPDT | digikey-footprints:Switch_Slide_11.6x4mm_EG1218 | SWPWR1 |

0xlama/ATtiny_LED_Matrix_Display_Badge
An ATtiny85 based badge size PCB that can display alphabets and numbers .

rbaron/lir2450-charger
A tiny USB C charger for LIR2450 coin cell batteries


ShawnHymel/555_badge
555 Badge ========= Badge project based on a 555 timer circuit. Users can follow along with the Digi-Key video series to design and fabricate their own badge PCB.


lucasasselli/keychain-tiny-game
Keychain reaction game to kill time while you wait your turn at the dentist office.


It measures 132.1 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the 74HC86D and BS-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the VolcanoKing370/xor-gate-toy repository on GitHub, at the commit this page was made from: the board is xor_gate_toy.kicad_pcb and its schematic xor_gate_toy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).