2 layers
TX5823
ep092/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.
94 parts9
2 layers78.5 × 28.5 mm
ADP2107ACPZ dev
Virtex7/miniTX58231kleine Version des TX5823-FPV-Sendemoduls
- Size
- 78.5 × 28.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 18
- Pads
- 85
- Tracks, vias
- 205, 7
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Feb 2016
- Updated
- 26 Mar 2016
Overview
ADP2107ACPZ dev is an open-source printed circuit board by Virtex7, from the Virtex7/miniTX5823 repository on GitHub. It is a 2-layer board of 78.5 × 28.5 mm with 24 parts on 18 nets, routed with 205 tracks and 7 vias.
It is built around the ADP-2-10-75+ and TX5823. Its parts include 10 capacitors, 4 resistors, 4 connectors, 2 ICs and 1 diode.
Main components
2README
README.mdminiTX5823
The miniTX5823 is a video and audio transmitter module designed for fpv. The Software ist compatible to tx5823-pro.
Hardware
The module contains the popular TX5823 video transmitter, modded so that channel selction via SPI ist possible. In addition there is a 5V buckconverter on the board with up to 2A output current, allowing 3s and 4s input. For clean voltage the TX5823 has its own, ultra low noise linear regulator.
Above all there is a IR transistor and a button on the module which makes easy binding with your receiver possible. You select the channel at your receiver in manual mode an bring it next to your transmitter. By pushing the button the transmitter changes to the channel of the receiver. The rx5808-pro-diversity or other compatible receivers have the necessary IR diode to use this feature.
Dimensions of the PCB are 4cm x 3cm
Software
For the beginning the board will run tx5823-pro. For future it is planned to add support for the onboard WS2812B RGB led
Other similar hardware/projects
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10u | Capacitors_SMD:C_0805 | C2, C4, C6, C10 |
| 2 | 100n | Capacitors_SMD:C_0603 | C1, C9 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P1, P2 |
| 1 | 0 | Resistors_SMD:R_0603 | R2 |
| 1 | 10 | Resistors_SMD:R_0603 | R1 |
| 1 | 1k | Resistors_SMD:R_0603 | R4 |
| 1 | 1n | Capacitors_SMD:C_0603 | C3 |
| 1 | 1n | Resistors_SMD:R_0603 | C5 |
| 1 | 3,3u | Inductors_NEOSID:Neosid_Inductor_SM-PIC1004H | L1 |
| 1 | 4,7u | Capacitors_SMD:C_0805 | C7 |
| 1 | 470u | Capacitors_ThroughHole:C_Radial_D8_L13_P3.8 | C8 |
| 1 | 68k | Resistors_SMD:R_0603 | R3 |
| 1 | ADP2107 | Housings_DFN_QFN:QFN-16-1EP_4x4mm_Pitch0.65mm | U1 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P3 |
| 1 | CONN_02X04 | Housings_DIP:DIP-8_W7.62mm_LongPads | P4 |
| 1 | SMA_EDGE | library_toni:SMA_EDGE | SMA_E1 |
| 1 | TEST_1P | Pin_Headers:Pin_Header_Straight_1x01 | W1 |
| 1 | TX5823 | library_toni:TX5823 | U2 |
| 1 | green | LEDs:LED_0603 | D1 |
Similar boards
- 6 layers60.4 × 98.3 mm
- 4 layers50 × 50 mm
- 2 layers56 × 65 mm
SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT - 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 2 layers58 × 35.5 mm
- 2 layers144 × 58 mm
Breakout 80pin 1393476-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
24 parts1.2k - 2 layers21.6 × 19.5 mm
Micron Logo LED
DraftShift/StealthChanger
Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.
24 parts1.2kGPL-3.0
Questions
How big is the ADP2107ACPZ dev PCB?
It measures 78.5 × 28.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ADP2107ACPZ dev use?
24 parts, built around the ADP-2-10-75+ and TX5823. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADP2107ACPZ dev KiCad files?
From the Virtex7/miniTX5823 repository on GitHub, at the commit this page was made from: the board is PCB/ADP2107_dev/ADP2107ACPZ-dev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADP2107ACPZ dev design in my own project?
Its repository states no licence, so its author keeps all rights: ask Virtex7 before reusing the design.