
Fwrtss
ynsta/fwrtss
Open source hardware and software project of a regulated soldering station for RT soldering tips

This is ReadMe for WM14 PCB It is a KiCAD file contailes Schematic and PCB Design. it has PDF and Gerber files
WM14 is an open-source printed circuit board by Vinayak911dj, from the Vinayak911dj/WM14-PCB repository on GitHub. It is a 2-layer board of 26 × 56 mm with 20 parts on 33 nets, routed with 223 tracks and 36 vias.
It is built around the FT232RL and IRFML8244TRPBF. Its parts include 6 resistors, 4 diodes, 3 capacitors, 3 ICs and 1 connector.
This is ReadMe for WM14 PCB It is a KiCAD file contailes Schematic and PCB Design. it has PDF and Gerber files
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R6 |
| 2 | LED | LED_THT:LED_D5.0mm_Clear | D1, D2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D3, D4 |
| 2 | R | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 100E | Potentiometer_SMD:Potentiometer_Bourns_3314R-1_Vertical_Hole | RV1 |
| 1 | 100K | Potentiometer_SMD:Potentiometer_Bourns_3314R-1_Vertical_Hole | RV2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 10uF/25V | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 2mm RELI-4 | Connector_PinSocket_2.00mm:PinSocket_1x04_P2.00mm_Vertical | CON1 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | INTERFACE-FT232RL_SSOP28_ | INTERFACE-FT232RL_SSOP28_:SSOP28-0.65-10.2X5.2MM | U1 |
| 1 | IRFML8244TRPBF | IRFML8244TRPBF:SOT95P240X112-3N | U2 |
| 1 | MCP6002-xMC | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mm | U3 |

ynsta/fwrtss
Open source hardware and software project of a regulated soldering station for RT soldering tips

mod-audio/cc-hw-arduino-shield
MOD Arduino Shield hardware repository.

km4nfq/capacitive-touch-key
This key is based on the M0UKD Capacitive Touch Key described at:



GhanGhan/SurvBot
Remote controlled robot that surveys the environment it is travelling in

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

It measures 26 × 56 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the FT232RL and IRFML8244TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Vinayak911dj/WM14-PCB repository on GitHub, at the commit this page was made from: the board is WM14/WM14.kicad_pcb and its schematic WM14/WM14.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Vinayak911dj before reusing the design.