

USB to UART Converter
CP2102N USB-C to logic-level serial bridge. Designed in KiCad 9.
- Size
- 32.3 × 15.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 36
- Pads
- 123
- Tracks, vias
- 166, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Aug 2026
- Updated
- 16 Aug 2026
Overview
USB to UART Converter is an open-source printed circuit board by VikramR3, from the VikramR3/USB_to_UART_Converter repository on GitHub, published under the MIT licence. It is a 2-layer board of 32.3 × 15.5 mm with 19 parts on 36 nets, routed with 166 tracks and 13 vias.
It is built around the LESD5D5.0CT1G. Its parts include 7 resistors, 5 diodes, 4 capacitors, 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdUSB to UART Converter
A 2-layer PCB that bridges USB to 3.3 V logic-level serial using a CP2102N in a QFN-28 package: USB-C in, a 5-pin header out for GND, VCC, RX, TX and RST, with TX/RX activity LEDs and ESD protection on the data lines. Designed in KiCad 9.

Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0201_0603Metric | C1, C2, C3, C4 |
| 4 | 1k | Resistor_SMD:R_0201_0603Metric | R4, R5, R6, R7 |
| 3 | LESD5D5.0CT1G | easyeda2kicad:SOD-523_L1.2-W0.8-LS1.6-BI | D3, D4, D5 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | LED | LED_SMD:LED_0201_0603Metric | D1, D2 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
Similar boards
- 2 layers86 × 54 mm

- 2 layers105.2 × 71.1 mm

Onyx PCB
CuriousMotor/Onyx-Stepper-Motherboard
The successor of the iconic Arduino-CNC-shield
96 parts56MIT - 2 layers55 × 55 mm

LeafNode v3.1
leafai-io/leaf-node-v3.x
Modular node for sensor monitoring and device control in grow environments.
91 parts47 - 2 layers51.1 × 30 mm

Franzininho WIFI
Franzininho/Franzininho-WIFI-dev-edition
Versão da Franzininho para teste e validação do ESP32-S2
31 parts39 - 4 layers39 × 40 mm

- 2 layers58.5 × 88 mm

Fugu2
fl4p/Fugu2
Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources
147 parts24 - 2 layers28.5 × 53.6 mm

- 4 layers145.5 × 64 mm

Muffin
JunOllyLi/TX_PCB
NOTE: the latest PCB had been manufactured was v2.0. But it had the Gimbal ZH-connector reversed. The schematics and PCB drawing had been updated to v2.1 to fix that. But v2.1 had not been really manufactured yet.
138 parts17
Questions
How big is the USB to UART Converter PCB?
It measures 32.3 × 15.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USB to UART Converter use?
19 parts, built around the LESD5D5.0CT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB to UART Converter KiCad files?
From the VikramR3/USB_to_UART_Converter repository on GitHub, at the commit this page was made from: the board is USB_to_UART_Converter.kicad_pcb and its schematic USB_to_UART_Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB to UART Converter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).