6 layers69.3 × 111.8 mm
FMC MIPI v2
VideoGPU/FMC_MIPI
FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface
143 parts22
6 layers82.1 × 67 mm
Jetson camera interposer
VideoGPU/Jetson_TX2_camera_interposer1Camera module interposer for Jetson TX2 development board. Useful for MIPI CSI and I2C debugging.
- Size
- 82.1 × 67 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 81
- Pads
- 308
- Tracks, vias
- 2,539, 431
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Sep 2021
- Updated
- 25 Nov 2022
Overview
Jetson camera interposer is an open-source printed circuit board by VideoGPU, from the VideoGPU/Jetson_TX2_camera_interposer repository on GitHub, published under the BSD-3-Clause licence. It is a 6-layer board of 82.1 × 67 mm with 27 parts on 81 nets, routed with 2,539 tracks and 431 vias.
It is built around the QSH-060-01-L-D-A and QTH-060-01-L-D-A. It belongs with the computers and single-board computers boards of this library.
Main components
2
QSH-060-01-L-D-A
SMD,P=0.5mm-55℃~+125℃ 0.5mm 120P 175V 2 2A Female Gold Phosphor Bronze Slot Contact Surface Mount,Vertical SMD,P=0.5mm Board-to-Board and Backplane Connector ROHSSamtecBoard-To-Board And Backplane Connector
QTH-060-01-L-D-A
SMD,P=0.5mm-55℃~+125℃ 0.5mm 120P 175V 2 2A Gold Phosphor bronze Surface Mount,Vertical SMD,P=0.5mm Board-to-Board and Backplane Connector ROHSSamtecBackplane Connector
README
README.mdJetson_TX2_camera_interposer
Camera module interposer for Jetson TX2 development board. Useful for MIPI CSI and I2C debugging.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | GND | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J3, J7, J22, J23 |
| 4 | MountingHole | Mounting_Holes:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 1 | AVDD_CAM | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J5 |
| 1 | CAM_AF_PWDN | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J14 |
| 1 | CAM_FLASH_EN | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J15 |
| 1 | CAM_INTR | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J19 |
| 1 | CAM_VSYNC | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J9 |
| 1 | Conn_02x30_Odd_Even | Pin_Headers:Pin_Header_Straight_2x12_Pitch2.54mm | J8 |
| 1 | DVDD_CAM_LV | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J4 |
| 1 | IR_READY | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J18 |
| 1 | IR_TRIGGER | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J20 |
| 1 | JETSON_1V2 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J16 |
| 1 | JETSON_1V8 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J10 |
| 1 | QSH-060-01-L-D-A | TX2_Footprints:QSH-060-01-L-D-A | J1 |
| 1 | QTH-060-01-L-D-A | TX2_Footprints:QTH-060-01-L-D-A | J2 |
| 1 | VDD_3V3 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J11 |
| 1 | VDD_AF | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J6 |
| 1 | VDD_CAM_FQ_HV_CAM | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J13 |
| 1 | VDD_IR | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J17 |
| 1 | VDD_SYS | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J12 |
| 1 | VSYS_EN | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J21 |
Similar boards
- 6 layers397.9 × 240.4 mm
- 6 layers30 × 22 mm
Secure elements
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
27 parts8MIT - 6 layers167.7 × 68.9 mm
- 6 layers43.5 × 22 mm
- 6 layers13 × 13 mm
Core Module Intel
MichalVarsanyi/VoxLink
VoxLink is a high-speed solution that allows interfacing of up to 100 sensors using a single high-speed host device.
27 parts1MIT - 6 layers50 × 25 mm
- 6 layers32.8 × 43.7 mm
Questions
How big is the Jetson camera interposer PCB?
It measures 82.1 × 67 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Jetson camera interposer use?
27 parts, built around the QSH-060-01-L-D-A and QTH-060-01-L-D-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jetson camera interposer KiCad files?
From the VideoGPU/Jetson_TX2_camera_interposer repository on GitHub, at the commit this page was made from: the board is Jetson_camera_interposer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jetson camera interposer design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).