

Esp32steto
This repository hold some sources tree for our IOT agent
- Size
- 96.3 × 48.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 40
- Pads
- 176
- Tracks, vias
- 414, 32
- Pours
- 246
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Jun 2021
- Updated
- 28 Jan 2024
Overview
Esp32steto is an open-source printed circuit board by VibrasticLab, from the VibrasticLab/ehealth-iot repository on GitHub. It is a 2-layer board of 96.3 × 48.5 mm with 44 parts on 40 nets, routed with 414 tracks and 32 vias.
It is built around the ESP32-WROOM-32, AMS1117-3.3 and INMP441. Its parts include 15 resistors, 9 capacitors, 7 switches, 3 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
3ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsINMP441
SMD-960Hz~15kHz SMD-9 MEMS Microphones ROHSTDK InvenSenseMEMS Microphones
README
README.mdehealth-iot
This repository hold some sources tree for our IOT agent
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6, R13, R14, R15, R16, R17 |
| 7 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C5, C6, C7, C8, C9 |
| 7 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 5 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R7, R8, R9 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10u | Capacitor_SMD:C_Elec_6.3x5.4 | CP1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | D | Diode_SMD:D_SMA_Handsoldering | D2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | INMP441 | INMP441:INMP441 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | SSD1306 | SSD1306:128x64OLED | Brd1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J2 |
More from VibrasticLab/ehealth-iot
1- 2 layers32.4 × 76.4 mm

Similar boards
- 2 layers70 × 100 mm

Iot badge-433
galopago/iot-badge-legacy
Electronic conference badge for programming conventions, hacking events, etc.
77 parts4 - 2 layers74.9 × 100.3 mm

Spectrum analyzer
JadenS180/spectrum-analyzer
ESP32-based real-time audio spectrum analyzer with custom PCB design. Features INMP441 I2S microphone, SSD1306 OLED display, FFT processing, and real-time WiFi streaming to a browser-based visualizer via WebSockets.
11 parts2MIT - 2 layers144.4 × 105 mm

Arbeit fertig
Mohamedqweder/smart-ip-phone
Schaltplan und PCB-Design für ein WLAN-basiertes IP-Telefon. Entwickelt mit KiCad auf Basis des ESP32-WROOM-32.
20 parts - 2 layers40 × 111 mm

- 2 layers100 × 60 mm

Pico node
Mounith-H/AI-Powered-Edge-Gunshot-Detection-for-Wildlife-Protection
Intelligent gunshot detection system using Raspberry Pi Pico
19 partsMIT - 2 layers90 × 76.5 mm

- 2 layers85 × 56 mm

- 2 layers62.2 × 30.5 mm

WLED ESP32 Controller
Hasenpups/WLED_ESP32_Controller
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
24 parts44
Questions
How big is the Esp32steto PCB?
It measures 96.3 × 48.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32steto use?
44 parts, built around the ESP32-WROOM-32, AMS1117-3.3 and INMP441. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32steto KiCad files?
From the VibrasticLab/ehealth-iot repository on GitHub, at the commit this page was made from: the board is esp32-steto/circuit/esp32steto.kicad_pcb and its schematic coughgui/circuit/lcdmicrpi/lcdmicrpi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32steto design in my own project?
Its repository states no licence, so its author keeps all rights: ask VibrasticLab before reusing the design.