2 layers190 × 80 mm
Tone o mat v2.0
Vedatori/Tone-O-Mat
Analog tone synthetizator based on a 555 timer meant for STEM education.
80 parts1
2 layers193 × 81.9 mm
Tone o mat
Vedatori/Tone-O-Mat1Analog tone synthetizator based on a 555 timer meant for STEM education.
- Size
- 193 × 81.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 133
- Nets
- 46
- Pads
- 267
- Tracks, vias
- 498, 69
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Jan 2023
- Updated
- 15 Oct 2023
Overview
Tone o mat is an open-source printed circuit board by Vedatori, from the Vedatori/Tone-O-Mat repository on GitHub. It is a 2-layer board of 193 × 81.9 mm with 133 parts on 46 nets, routed with 498 tracks and 69 vias.
It is built around the NE555PS and BC547. Its parts include 82 resistors, 20 connectors, 13 capacitors, 3 diodes and 2 ICs.
Main components
2README
README.mdTone-O-Mat V2.0 [cz]
Tone-O-Mat je analogový syntetizátor vytvořený pro Letní robotický tábor 2023 organizovaný spolkem Vědátoři. Jedná se o stavebnici založenou na 555 timeru určenou pro vzdělávání v oblasti STEM s reproduktorem nebo výstupem pro audio-jack. Stavebnice se skládá ze dvou hlavních částí - plošného spoje osazeného elektronickými součástkami a dřevěné krabičky. Tuto stavebnici účastníci tábora obdrželi k montáži. Hlavním cílem bylo zdokonalit dovednosti pájení a zručnost v práci se dřevem. Z připravených dřevěných dílů si účastníci sami sestavili a slepili krabičku. Poté se pustili do pájení všech součástek na plošný spoj. Měli možnost volit mezi tradičním pájením THT a náročnějším zapájením SMD součástek. Tento projekt byl koncipován tak, aby byl přístupný jak úplným začátečníkům v pájení, tak i těm s více zkušenostmi. Po dokončení stavebnice mohli účastníci na syntetizátoru hrát jako na malém klavírku.
Tone-O-Mat V2.0 [en]
Tone-O-Mat is an analog tone synthesizer designed for Summer robotics camp 2023 (cz) organized by Vědátoři team (cz). It is an electronic kit based on a 555 timer meant for STEM education, with speaker or audio-jack output. It is composed of two main parts - a printed circuit board with electronic components and a wooden enclosure. Participants at the camp received this kit for assembly. The primary objective was to enhance soldering skills and proficiency in working with wood. From the pre-cut wooden pieces, participants assembled and glued the enclosure themselves. They then proceeded to solder all the components onto the printed circuit board. They had the option to choose between traditional THT soldering and the more challenging SMD soldering. This project was designed to be accessible to both complete beginners in soldering and those with more experience. Upon completing the assembly, participants could play the synthesizer as a miniature keyboard.
Licence
- Obsah tohoto repozitáře je sdílen pod licencí Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).
License
- The contents of this repository are shared under the license Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).
Source
The schematic was customised from the schematic found at https://gr33nonline.wordpress.com/2018/04/25/stylophone/
Parts
133| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x01_Male | Connector_Pin:Tone-O-Mat-Top-Pad | J2, J5, J7, J10, J12, J14, J17, J19 |
| 6 | 3k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R14, R20, R54, R56, R80 |
| 6 | 3k3 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11, R13, R19, R53, R55, R79 |
| 5 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R6, R50, R60, R74 |
| 5 | 4k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R5, R49, R59, R73 |
| 4 | Conn_01x01_Male | Connector_Pin:Tone-O-Mat-Right-Pad | J3, J8, J15, J20 |
| 4 | Conn_01x01_Male | Connector_Pin:Tone-O-Mat-Left-Pad | J1, J4, J9, J16 |
| 4 | Conn_01x01_Male | Connector_Pin:Tone-O-Mat-Middle-Pad | J6, J11, J13, J18 |
| 3 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C5 |
| 3 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C4, C6 |
| 3 | 150R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R28, R52, R72 |
| 3 | 150R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R27, R51, R71 |
| 3 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R43, R63, R77 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R44, R64, R78 |
| 3 | 2k4 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R25, R31, R33 |
| 3 | 2k4 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R26, R32, R34 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3 |
| 2 | 10k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | TUNE, VOL |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D3 |
| 2 | 1k8 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R37, R41 |
| 2 | 1k8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R38, R42 |
| 2 | 2k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24, R30 |
| 2 | 2k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R23, R29 |
| 2 | 300R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R62 |
| 2 | 300R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R61 |
| 2 | 3k6 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R17 |
| 2 | 3k6 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R18 |
| 2 | 5k1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R67, R69 |
| 2 | 5k1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R68, R70 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C9 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R57 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R58 |
| 1 | 10uF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C8 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 2.2uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11 |
| 1 | 2.2uF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C10 |
| 1 | 270k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R81 |
| 1 | 270k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R82 |
| 1 | 27k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R48 |
| 1 | 27k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R47 |
| 1 | 27nF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C12 |
| 1 | 27nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R40 |
| 1 | 2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R39 |
| 1 | 2k2 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R35 |
| 1 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R36 |
| 1 | 3k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R22 |
| 1 | 3k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21 |
| 1 | 499R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
| 1 | 499R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | 4k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 4k3 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 56R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R76 |
| 1 | 56R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R75 |
| 1 | 620R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R45 |
| 1 | 620R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R46 |
| 1 | 680R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R66 |
| 1 | 680R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R65 |
| 1 | Conn_01x01_Male | Connector_Pin:Pin_D1.3mm_L11.0mm | STYLUS |
| 1 | LED GREEN | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D2 |
| 1 | LOGO | Custom_Graphics:Vedatori_logo | G1 |
| 1 | LOGO | Custom_Graphics:Vedatori_logo_small | G2 |
| 1 | NE555PS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | NE555PS | Package_DIP:DIP-8_W7.62mm_LongPads | U1 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SP1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Right_Angle | USB-C |
| 1 | VIBRATO | CustomLib:SwitchMini | VBR |
More from Vedatori/Tone-O-Mat
1Similar boards
- 2 layers83.3 × 65.3 mm
SimonShield
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
46 parts14kMIT - 2 layers56 × 65 mm
SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers99.1 × 99.7 mm
RC6502 General Video Adapter
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
80 parts193GPL-3.0 - 2 layers55.9 × 38.6 mm
- 2 layers99.9 × 70 mm
- 2 layers40 × 100 mm
Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0 - 2 layers100 × 100 mm
Questions
How big is the Tone o mat PCB?
It measures 193 × 81.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tone o mat use?
133 parts, built around the NE555PS and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tone o mat KiCad files?
From the Vedatori/Tone-O-Mat repository on GitHub, at the commit this page was made from: the board is Electronics/tone-o-mat.kicad_pcb and its schematic Electronics/tone-o-mat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tone o mat design in my own project?
Its repository states no licence, so its author keeps all rights: ask Vedatori before reusing the design.