
CANode V2
VISHNUPRIYANR1812/PCB-Projects
Collection of my custom PCB designs, including schematics, Gerber files, and project details.

Collection of my custom PCB designs, including schematics, Gerber files, and project details.
FC QUAD V1 is an open-source printed circuit board by VISHNUPRIYANR1812, from the VISHNUPRIYANR1812/PCB-Projects repository on GitHub. It is a 4-layer board of 55 × 50 mm with 66 parts on 70 nets, routed with 526 tracks and 155 vias.
It is built around the BMP180, HMC5883L-TR and MPU-6050, with the BAT54C and BC547 among its other parts. Its parts include 18 capacitors, 13 resistors, 5 ICs, 3 diodes and 2 crystals. It belongs with the STM32 boards of this library.
🚀 Introducing the Isolated SPI-CAN Node PCB – Designed in Just 3 Hours! 🚀
Today, I designed a single-layer PCB called "Isolated SPI-CAN Node" in just 3 hours! This board integrates the MCP2515 standalone SPI-CAN controller and TJA1050 physical CAN transceiver, ensuring isolation between the host controllers (like Arduino, ESP32) and the CAN bus.
🔹 Key Features:
✅ DIP Switch for SPI Isolation – Easily disconnect SPI lines while programming the main MCU.
✅ Power Isolation Switch – Turn off power to the node when needed.
✅ Power Status LEDs – Clear visual indicators for power status.
✅ 120Ω CAN Termination – Provided as solder pads for easy implementation.
✅ Flexible Connectivity – Screw terminals and jumper headers for CAN_H, CAN_L, and C_GND.
🔍 Use Case:
Designed for industrial automation, automotive networks, and IoT applications, this PCB ensures robust and error-free CAN communication. By isolating the CAN bus from the host controller, it protects Arduino, ESP32, and other MCUs from electrical noise and voltage fluctuations.
💡 Excited to share this fast and efficient PCB design process! Looking forward to your thoughts and feedback.
#PCBdesign #EmbeddedSystems #CANbus #HardwareDesign #IoT #ElectronicsEngineering #Arduino #ESP32 #Automotive #IndustrialAutomation #RapidPrototyping
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C5, C6, C7, C17, C18 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R12, R13 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C13, C16 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 2 | 10R | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 5.8K | Resistor_SMD:R_0603_1608Metric | R7, R11 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 0.22uF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 100uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 25MHz/12pF | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.7KHz/6pF | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y2 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 4PIN_ESC | Custom_Footprints:Esc_connector_4M | ESC |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | BMP180 | Custom_Footprints:BMP180 | U4 |
| 1 | BOOT0 | Custom_Footprints:SW_TS09-63-25-WT-260-SMT-TR | BOOT |
| 1 | CSP-USC16-TR | Custom_Footprints:VALCON_CSP-USC16-TR | J1 |
| 1 | HMC5883L-TR | Custom_Footprints:HMC5883L-TR | U5 |
| 1 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | I2C-BUS |
| 1 | KEY | Custom_Footprints:SW_TS09-63-25-WT-260-SMT-TR | SW1 |
| 1 | LD1117S12TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LOGO | Custom_logos_Footprints:NORTH | G*** |
| 1 | LOGO | Custom_logos_Footprints:STM | G*** |
| 1 | LOGO | Custom_logos_Footprints:BOSCH | G*** |
| 1 | LOGO | Custom_logos_Footprints:TDK | G*** |
| 1 | LOGO | Custom_logos_Footprints:DESIGNBY | G*** |
| 1 | LOGO | Custom_logos_Footprints:HWELL | G*** |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U3 |
| 1 | NC | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | NRST | Custom_Footprints:SW_TS09-63-25-WT-260-SMT-TR | NRST |
| 1 | POWER MODULE | Custom_Footprints:JST_B4B-PH-K | POWER |
| 1 | RGB | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RGB |
| 1 | SBUS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RC-SBUS |
| 1 | SPI-BLACKBOX | Custom_Footprints:7_TP | SPI-FLASH |
| 1 | STM32F411CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | UART |
| 1 | VBAT | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | VB |
| 1 | V_SENSE | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | VS |

VISHNUPRIYANR1812/PCB-Projects
Collection of my custom PCB designs, including schematics, Gerber files, and project details.

VISHNUPRIYANR1812/PCB-Projects
Collection of my custom PCB designs, including schematics, Gerber files, and project details.

VISHNUPRIYANR1812/PCB-Projects
Collection of my custom PCB designs, including schematics, Gerber files, and project details.


RamRamAndroid/ESP32Drone-CodeMatrix
ESP32 Drone by CodeMatrix is a compact, WiFi-controlled drone based on the ESP32-S3 microcontroller. Designed for hobbyists, makers, and engineers, ESP32 Drone by CodeMatrix offers a simple yet powerful platform for…

MAATHES-THILAK-K/ESP32-S3_FLIGHT_CONTROLLER
A custom-designed flight controller based on the ESP32-S3 module, built for compatibility with the esp-fc firmware and Betaflight-like configuration.

Ncerzzk/luckyfox_pico_mini_FC
A flight controller hardware based on LucyFox Pico Mini Board

WOAH-KAMRAN/litewing-uart
litewing with support for uart based optical flow


punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

oomlout/oomlout_oomp_project_bot_v_2
It measures 55 × 50 mm and has 4 copper layers, 1.69 mm thick.
66 parts, built around the BMP180, HMC5883L-TR, MPU-6050 and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the VISHNUPRIYANR1812/PCB-Projects repository on GitHub, at the commit this page was made from: the board is FC_QUAD_V1/FC_QUAD_V1.kicad_pcb and its schematic CANode_V2/CAN_LINK.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask VISHNUPRIYANR1812 before reusing the design.