2 layers25 × 129.5 mm
Soily
danstiner/embedded
+-----------+-----+----------------------+--------------------+------------------------------------------------------------------------+ | Reference | Qty | Value | Part Number | Footprint |…
54 parts
2 layers32.7 × 32.7 mm
FDC2214-Breakout
VALMAKESTHINGS/FDC2214-Breakout14 Channel capacitive sensing based on the FDC2214 IC by TI
- Size
- 32.7 × 32.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 26
- Pads
- 124
- Tracks, vias
- 203, 19
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Sep 2023
- Updated
- 5 Sep 2023
Overview
FDC2214-Breakout is an open-source printed circuit board by VALMAKESTHINGS, from the VALMAKESTHINGS/FDC2214-Breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 32.7 × 32.7 mm with 52 parts on 26 nets, routed with 203 tracks and 19 vias.
It is built around the FDC2214RGHT and 625L3C040M00000. Its parts include 24 capacitors, 10 resistors, 5 connectors, 4 inductors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
2README
README.mdFDC2214-Breakout
4 Channel capacitive sensing based on the FDC2214 IC by TI
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 18pF | PCM_4ms_Capacitor:C_0603 | C1, C4, C5, C9, C10, C11, C12, C13, C15, C16, C17, C18, C20, C21, C22, C23 |
| 10 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 4 | 18uH | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1, L2, L3, L4 |
| 4 | 33pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C14, C19, C24 |
| 1 | 0.01 uf | PCM_4ms_Capacitor:C_0603 | C3 |
| 1 | 0.01uf | PCM_4ms_Capacitor:C_0603 | C8 |
| 1 | 0.1uf | PCM_4ms_Capacitor:C_0603 | C7 |
| 1 | 1uf | PCM_4ms_Capacitor:C_0603 | C2 |
| 1 | 625L3C040M00000 | 625L3C040M00000:IC_625L3C040M00000_CTS-M | U2 |
| 1 | FDC2214RGHT | FDC2214:RGH0016A | U1 |
| 1 | I/O | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | LOGO | Waifu_Material:Waifu_Material | G*** |
| 1 | LOGO | qr_code:qr_FDC | G*** |
| 1 | Sensor_0 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J3 |
| 1 | Sensor_1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2 |
| 1 | Sensor_2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | Sensor_3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
The 47 most common of 52 parts.
Similar boards
- 2 layers41.4 × 47.5 mm
U2f zero panel
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
52 parts2.4k - 2 layers136 × 130 mm
Lora nodemcu
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
52 parts1.1k - 2 layers69 × 53.8 mm
TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
52 parts530 - 2 layers52.5 × 36.6 mm
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers105.2 × 42.4 mm
- 2 layers45 × 45 mm
AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
52 parts379Apache-2.0 - 2 layers160 × 99.1 mm
Ardumower mega shield V1.00
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
52 parts282
Questions
How big is the FDC2214-Breakout PCB?
It measures 32.7 × 32.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FDC2214-Breakout use?
52 parts, built around the FDC2214RGHT and 625L3C040M00000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FDC2214-Breakout KiCad files?
From the VALMAKESTHINGS/FDC2214-Breakout repository on GitHub, at the commit this page was made from: the board is FDC_2214_Breakout/FDC_2214_Breakout.kicad_pcb and its schematic FDC_2214_Breakout/FDC_2214_Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FDC2214-Breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).