

Quad Motor Driver
PCB Design Files for 1U RW Test Stand
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 86
- Pads
- 366
- Tracks, vias
- 652, 104
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 Apr 2022
- Updated
- 7 Apr 2023
Overview
Quad Motor Driver is an open-source printed circuit board by UWCubeSat, from the UWCubeSat/1U_RW_Hardware repository on GitHub. It is a 2-layer board of 100 × 100 mm with 79 parts on 86 nets, routed with 652 tracks and 104 vias.
It is built around the DRV10970PWP. Its parts include 32 resistors, 20 capacitors, 6 connectors and 4 ICs. It belongs with the robots and motor control boards of this library.
Main components
1README
Quad_Motor_Driver/README.mdQuad Motor Driver
The Quad Motor Driver board contains four DRV10970 BLDC motor driver ICs and is intended for driving the Faulhaber 1509 motors that spin HuskySat-2's reaction wheels. The motors are connected with eight-pin Molex Pico-Lock connectors.
Use
The board contains two headers. The first contains labeled pins for ground and a 5V power input. The second contains PWM and direction control (FR) pins for each of the four motors. Each of the four motor driver subsystems has two solder jumpers. The lower-numbered jumper may be soldered closed to enable motor braking when the PWM signal is zero. If left unsoldered, the motor will coast. The higher-numbered jumper may be soldered closed to operate the motor with a sinusoidal signal. Otherwise, the motor will be driven with a trapezoidal signal. In our design, we plan to bridge both of these jumpers. Each motor driver subsystem also has two testpoints: the lower-numbered testpoint connects to the frequency indication (FG) signal and the higher-numbered testpoint connects to the lock indication (RD) signal.
Notes
-
The motor connector pinouts may or may not be backwards.
-
R1 and R2 (and their equivalents on the other motor driver subsystems) may not be required if TP1 and TP2 are not used.
-
R4, R5, and R6 (and their equivalents on the other motor driver subsystems) may not be required.
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 3.3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R10, R12, R13, R14, R17, R18, R20, R21, R22, R25, R26, R28, R29, R30 +4 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R8, R11, R16, R19, R24, R27, R32 |
| 8 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 4 | 0.1uF X7R | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6, C11, C16 |
| 4 | 10uF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8, C13, C18 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C10, C15, C20 |
| 4 | 1uF 16V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C7, C12, C17 |
| 4 | 2.2uF 10V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C9, C14, C19 |
| 4 | 24k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R15, R23, R31 |
| 4 | Conn_01x08_MountingPin | Connector_Molex:Molex_Pico-Lock_504050-0891_1x08-1MP_P1.50mm_Horizontal | J3, J4, J5, J6 |
| 4 | DRV10970 | Package_SO:HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x4.68mm_ThermalVias | U1, U2, U3, U4 |
| 4 | FG | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP3, TP5, TP7 |
| 4 | RD | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP4, TP6, TP8 |
| 1 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J2 |
| 1 | LOGO | HS2_parts:logo | G*** |
More from UWCubeSat/1U_RW_Hardware
1- 2 layers63.5 × 63.5 mm

Similar boards
- 2 layers51 × 47.5 mm

BLDC MD DRV10970
rakuseirobot/BLDC_MD_DRV10970
Motor driver for BLDC with hall sensors using DRV10970(Texas Instruments)
30 parts1 - 2 layers53.3 × 38.1 mm

- 2 layers64.4 × 30.6 mm

Modular single driver Driver
UWCubeSat/HS1_Motor_Test
BLDC motor driver for testing HS1 RW motors
23 parts1MIT - 2 layers36.8 × 34.7 mm

Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 2 layers128.8 × 99.5 mm

WarriorAttend
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
79 parts915 - 2 layers80 × 107.5 mm

Minino
ElectronicCats/Minino
Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.
79 parts183GPL-3.0 - 2 layers151.3 × 120.8 mm

Tairakb
strayer/taira-keyboard
A wireless low-profile split mechanical keyboard with 66 keys inspired by the ErgoDash and Corne Chocolate
79 parts164MIT - 2 layers111 × 130.6 mm

Questions
How big is the Quad Motor Driver PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Quad Motor Driver use?
79 parts, built around the DRV10970PWP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Quad Motor Driver KiCad files?
From the UWCubeSat/1U_RW_Hardware repository on GitHub, at the commit this page was made from: the board is Quad_Motor_Driver/Quad_Motor_Driver.kicad_pcb and its schematic Quad_Motor_Driver/Quad_Motor_Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Quad Motor Driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask UWCubeSat before reusing the design.