
PET project
UTokyoAT/rocket_Payload_UTAT2026
輸送機班2026年度の新人研修期間中の上級生での活動。Cansatを搭載したペットボトルロケットを開発するためのリポジトリ

輸送機班2026年度の新人研修期間中の上級生での活動。Cansatを搭載したペットボトルロケットを開発するためのリポジトリ
PET project is an open-source printed circuit board by UTokyoAT, from the UTokyoAT/rocket_Payload_UTAT2026 repository on GitHub. It is a 2-layer board of 110 × 50 mm with 26 parts on 42 nets, routed with 139 tracks and 198 vias.
It is built around the BMM350, BMP280 and BA50DD0T. Its parts include 9 connectors, 4 resistors, 4 ICs, 3 capacitors and 2 transistors.
輸送機班2026年度の新人研修期間中の上級生での活動。CanSatを搭載したペットボトルロケットを開発するためのリポジトリ
XIAO ESP32S3を2枚(XIAO1・XIAO2)使い、SPIで接続する構成。詳細は architecture.md を参照。
rocket_Payload_UTAT2026/
│
├── platformio.ini # ビルド・ボード・ライブラリ設定(env:xiao1 / env:xiao2 他)
│
├── include/
│ ├── shared.h # XIAO1タスク間共有データ(SensorData・MissionState)
│ └── spi_protocol.h # XIAO1⇔XIAO2間のSPIフレーム定義(SpiFrameToXiao2 他)
│
├── src/
│ ├── xiao1/ # センサー・GPS・誘導PID計算(SPIマスター)
│ │ ├── main.cpp # 起動・タスク生成
│ │ └── tasks/
│ │ ├── task_sensor.h # IMU・気圧・地磁気読み取り+姿勢フィルタ(100Hz, Core1)
│ │ ├── task_gps.h # GPS受信・パース(Core0)
│ │ ├── task_navigation.h # 誘導PID計算(100Hz, Core1)
│ │ ├── task_mission.h # ミッションステート遷移(20Hz, Core1)
│ │ └── task_spi_link.h # XIAO2への送信(100Hz, Core1)
│ └── xiao2/ # モータ駆動・WiFiテレメトリ中継(SPIスレーブ)
│ └── main.cpp
│
├── lib/
│ ├── Sensor/ # BMP280・MPU6050・BMM350 ドライバ+姿勢フィルタ ─ XIAO1
│ ├── GPS/ # TinyGPSPlus ラッパー ─ XIAO1
│ ├── PID/ # 汎用PIDコントローラ ─ XIAO1| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R4, R5 |
| 2 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R3, R7 |
| 2 | Conn_01x02_Socket | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1, J4 |
| 2 | NMOS | Package_TO_SOT_THT:TO-220-3_Vertical | Q2, Q3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2, J3 |
| 2 | ~ | my_footprint:XIAO-ESP32-S3-DIP | U1, U7 |
| 1 | 0.33 | Capacitor_THT:CP_Radial_Tantal_D4.5mm_P5.00mm | C1 |
| 1 | 22 | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C2 |
| 1 | BA50DD0T | Package_TO_SOT_THT:TO-220-3_Vertical | U8 |
| 1 | BMM350 | my_footprint:BMM350_PinSocket_Vertical | J6 |
| 1 | BMP280 | my_footprint:BMP280_PinSocket_Vertical | J9 |
| 1 | C | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J8 |
| 1 | GY-GPSV2-NEO6M | my_footprint:GY-GPSV2-NEO6M | J5 |
| 1 | MPU6050 | my_footprint:MPU6050_PinSocket_Vertical | J7 |
| 1 | ~ | my_footprint:TB6612FNG | U2 |
The 22 most common of 26 parts.

UTokyoAT/rocket_Payload_UTAT2026
輸送機班2026年度の新人研修期間中の上級生での活動。Cansatを搭載したペットボトルロケットを開発するためのリポジトリ

kt140/ECE445_SeniorDesign
This is the senior design project for Kanin Tangchartsiri, Lukas Gollings, and Wonjoon Lee.

WURocketry/Electrical_2023-2024
Electrical Repository for 2023-2024 Competition Year

CogniPilot/spinali_mcxn_t1_hub
MCXN T1 hub Schematic and Design Files

sean-o-sullivan/octowhere-pcb
daughterboard that adds lora and magnetometer to the waveshare module

Romeo-Lorenzo/DIY_Electromechanical_SmartWatch
I decided to mìhave my own take at a quartz watch by using two Miyota 2035 watch movements and a custom made case and PCB.

davispe1/wearable-imu
Node PCB — revision 1.0. 4-layer board (F.Cu, In1.Cu, In2.Cu, B.Cu).


kristofkatzenberger/windsensor
This repository contains the design files for a portable wind sensor developed in 2025/26 at the University of Applied Sciences Technikum Wien. This project was completed as part of the Bachelor's Thesis:
It measures 110 × 50 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the BMM350, BMP280 and BA50DD0T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UTokyoAT/rocket_Payload_UTAT2026 repository on GitHub, at the commit this page was made from: the board is hardware/kicad/PET_project/PET_project.kicad_pcb and its schematic hardware/kicad/PET_project/PET_project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask UTokyoAT before reusing the design.