Skip to the content
2 layers95 × 83 mmStinkyController 1.1, the printed circuit board in 3D

This directory contains the KiCad PCB projects and manufacturing outputs from the supplied StinkyController 0.5.zip archive.

Size
95 × 83 mm
Copper layers
2
Thickness
1.6 mm
Parts
65
Nets
46
Pads
243
Tracks, vias
446, 103
Pours
9
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Sep 2026
Updated
19 Sep 2026

Overview

StinkyController 1.1 is an open-source printed circuit board by UTSM-proto, from the UTSM-proto/proto-motor-controller repository on GitHub. It is a 2-layer board of 95 × 83 mm with 65 parts on 46 nets, routed with 446 tracks and 103 vias.

It is built around the DGD2304S8. Its parts include 19 resistors, 15 capacitors, 7 ICs, 6 transistors and 4 diodes.

Main components

1

README

hardware/StinkyController/README.md

StinkyController hardware

This directory contains the KiCad PCB projects and manufacturing outputs from the supplied StinkyController 0.5.zip archive.

Project revisions

  • StinkyController 0.5
  • StinkyController 1
  • StinkyController 1.1
  • StinkyController MK2 (newest PCB and Gerber revision in the archive)

The gerb* directories and ZIP files contain the supplied manufacturing outputs. Generated KiCad user preferences, caches, backups, and macOS metadata are excluded from version control.

Missing source

The supplied archive does not contain a .kicad_sch schematic file. The PCB files retain component values, footprints, net names, and routed connectivity, but the editable schematic source will need to be added separately if it still exists.

Parts

65
QtyValueFootprintReferences
121uF1206C1, C2, C3, C11, C12, C14, C15, C16, C17, C18, C19, C20
72.2k1206R1, R2, R3, R4, R5, R6, R13
6TO-220-FLATQ1, Q2, Q3, Q4, Q5, Q6
6221206R14, R15, R16, R17, R18, R19
5, , , ,
547k1206R7, R8, R10, R11, R12
3SOD-123D2, D3, D4
3DGD2304SOIC8U5, U6, U7
3SCREWM3HOLEU$10, U$11, U$12
2470uFCPOL-RADIAL-5MM-10MMC4, C5
1clipboard:2cee7d85-343c-4eff-a002-e4d68fe1ff7c
1PICO-PKG-NO_DEBUGU1
1TACTILE_SWITCH_PTH_6.0MMS1
10.0005R2512R9
122nF1206C9
1FUSEAUTO_FUSEJ3
1HEADER4VALULOK4PINVALULOKJ1
1HEADER66PINVALULOKJ2
1INA181SOT23-6U2
1K78U05V78W_BACKWARDSU4
1LOGOLOGOG***
1TC1240ASOT23-6U3
1TVSDO-214ACD1

Similar boards

  • 2 layers42 × 67 mmLalboard, the printed circuit board in 3D

    Lalboard

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    65 parts993
  • 2 layers198.1 × 30.5 mmSplitflap driver, the printed circuit board in 3D

    Splitflap driver

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    65 parts744MIT
  • 2 layers74.8 × 32.5 mmMooltipass mini, the printed circuit board in 3D

    Mooltipass mini

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    65 parts531
  • 2 layers60 × 100 mmV3 Connector Only, the printed circuit board in 3D

    V3 Connector Only

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    65 parts439GPL-2.0
  • 2 layers45 × 58.2 mmOpentama, the printed circuit board in 3D

    Opentama

    Sparkr-tech/opentama

    An open-source reference design for MCUGotchi

    65 parts237
  • 2 layers40 × 120 mmPhotodiode board v3, the printed circuit board in 3D

    Photodiode board v3

    0x23/nmWave-Interferometer

    An Open Source Interferometer for Accurate Distance Measurements

    65 parts151MIT
  • 2 layers78 × 130 mmLofence, the printed circuit board in 3D

    Lofence

    kiu/lofence

    LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.

    65 parts142MIT

Questions

How big is the StinkyController 1.1 PCB?

It measures 95 × 83 mm and has 2 copper layers, 1.6 mm thick.

What parts does the StinkyController 1.1 use?

65 parts, built around the DGD2304S8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the StinkyController 1.1 KiCad files?

From the UTSM-proto/proto-motor-controller repository on GitHub, at the commit this page was made from: the board is hardware/StinkyController/StinkyController 1.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the StinkyController 1.1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask UTSM-proto before reusing the design.