Skip to the content
2 layers152.5 × 105 mmSeries-500, the printed circuit board in 3D

If this project was useful to you for your porjects and saved you time, please pay me a drink

Size
152.5 × 105 mm
Copper layers
2
Thickness
1.6 mm
Parts
46
Nets
49
Pads
126
Tracks, vias
156, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Aug 2026
Updated
1 Oct 2026

Overview

Series-500 is an open-source printed circuit board by UTS-500-Series, from the UTS-500-Series/Pre-Amp repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 152.5 × 105 mm with 46 parts on 49 nets, routed with 156 tracks and 0 vias.

It is built around the NE5532. Its parts include 20 resistors, 9 capacitors, 6 connectors, 4 diodes and 4 transistors.

Main components

1

README

README.md

kiCAD Series 500 Compatible Template

Template PCB Series 500 compatible, for kiCAD. Made by Tormy Van Cool

If this project was useful to you for your porjects and saved you time, please pay me a drink paypal

Licence

Copyright 2026 the UTS 500 Series team.

This source describes Open Hardware and is licensed under the CERN-OHL-S v2.

You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2.

This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions.

Source location: https://github.com/UTS-500-Series/Pre-Amp

As per CERN-OHL-S v2 section 4, should You produce hardware based on this source, You must where practicable maintain the Source Location visible on the external case of the preamp module or other products you make using this source.

The full licence text is in LICENSE.

Third-party material

This licence covers the team's own work. It does not cover, and grants no rights in, the following:

  • The circuit is ESP Project 66 by Rod Elliott, with phantom power from Project 96. ESP's terms permit construction for personal use but not commercial manufacture.
  • The board template (the card outline, edge connector footprint and the text above this section) is Tormy Van Cool's kiCAD Series 500 template, published under the GNU GPL v3. That material stays under the GPL v3, whose text is kept in LICENSE-GPL-3.0.

Parts

46
QtyValueFootprintReferences
20RResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1, R2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 +4
41N47xxADiode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3, D4
22N3906Package_TO_SOT_THT:TO-92_InlineQ1, Q2
2BC549Package_TO_SOT_THT:TO-92_InlineQ3, Q4
2CCapacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mmC2, C3
2C_Polarized_SmallCapacitor_THT:CP_Radial_D8.0mm_P3.80mmC5, C9
2C_Polarized_SmallCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC7, C8
1+48 SwitchConnector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_VerticalSW1
1C_Polarized_SmallCapacitor_THT:CP_Radial_D13.0mm_P5.00mmC6
1C_Polarized_SmallCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
1C_SmallCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC4
1EDA 306Library.Cards:eda306J1
1GroundConnector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalJ4
1Mic In +Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalJ2
1Mic In -Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalJ3
1NE5532Package_DIP:DIP-8_W7.62mmU1
1Out +Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalJ6
1Out -Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalJ5
1PotentiometerConnector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_VerticalRV1

Similar boards

  • 2 layers52.5 × 36.6 mmESP8266-WebRadio, the printed circuit board in 3D

    ESP8266-WebRadio

    karawin/Ka-Radio

    A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

    52 parts453
  • 2 layers100 × 68 mmSI4684 SMD, the printed circuit board in 3D

    SI4684 SMD

    PE5PVB/SI4684-DAB-Receiver

    SI4684 ESP32 DAB Receiver

    91 parts135GPL-3.0
  • 2 layers165 × 103.8 mmOutput pcb, the printed circuit board in 3D

    Output pcb

    QuinnFreedman/modular

    A collection of free & open source DIY synthesizer module designs for Eurorack

    128 parts116
  • 2 layers173 × 85 mmAudio board, the printed circuit board in 3D

    Audio board

    EleonoreMizo/pedalevite

    Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.

    268 parts101WTFPL
  • 2 layers84 × 85 mmHbr mk2-rxtx, the printed circuit board in 3D

    Hbr mk2-rxtx

    afiskon/hbr-mk2

    All HF bands QRP CW/SSB transceiver

    239 parts76MIT
  • 2 layers149.9 × 55.9 mmPc amplifier, the printed circuit board in 3D

    Pc amplifier

    dilshan/arduino-mini-amp

    Arduino based stereo audio amplifier system

    140 parts67MIT
  • 4 layers99 × 99 mmMegaBlaster2, the printed circuit board in 3D

    MegaBlaster2

    AidanHockey5/MegaBlaster2

    The latest iteration of my hardware Sega Genesis/Megadrive Video Game Music Player

    120 parts59AGPL-3.0
  • 2 layers80 × 60 mmDigishaper152, the printed circuit board in 3D

    Digishaper152

    jonnor/projects

    Small projects not worthy of dedicated repositories

    61 parts45

Questions

How big is the Series-500 PCB?

It measures 152.5 × 105 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Series-500 use?

46 parts, built around the NE5532. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Series-500 KiCad files?

From the UTS-500-Series/Pre-Amp repository on GitHub, at the commit this page was made from: the board is Series-500.kicad_pcb and its schematic Series-500.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Series-500 design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).