
ARGOS DEMO
CNES/argos-demo-board
Demo board designed to use the ARRIBADA SMD module via USB to send ARGOS messages to the Kineis constellation.

Arduino Shield (1) is an open-source printed circuit board by UMN-LATIS, from the UMN-LATIS/LinearSnap-Hardware repository on GitHub. It is a 2-layer board of 89.7 × 53.3 mm with 25 parts on 81 nets, routed with 42 tracks and 0 vias.
It is built around the B2B-XH-A and B3B-XH-A. Its parts include 7 connectors, 2 resistors and 2 transistors. It belongs with the microcontroller boards boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Cam1, L-End1, L-Home1, LED1, S-End1, S-Home1 |
| 6 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4, MH5, MH6 |
| 2 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2 |
| 2 | Analog | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3, J5 |
| 2 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | L-Step1, S-Step1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Communication | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | Digital | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J7 |
| 1 | PWM | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | PWM | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |

CNES/argos-demo-board
Demo board designed to use the ARRIBADA SMD module via USB to send ARGOS messages to the Kineis constellation.


nischayhegde/jetson_spi_to_can_x8_breakout
A PCB board for expanding the SPI channels on Jetson Orin nano super into 8 CANfd channels. Comes with chip select logic and jetpack drivers. Supports 1Mbit per CAN channel.



01binary/str1ker
A human-scale mech integrated with Robot Operating System


It measures 89.7 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the B2B-XH-A and B3B-XH-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UMN-LATIS/LinearSnap-Hardware repository on GitHub, at the commit this page was made from: the board is PCB/Arduino Shield (1).kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask UMN-LATIS before reusing the design.