Skip to the content
2 layers45.7 × 53.3 mmLEDPulser, the printed circuit board in 3D

Hardware design files by the UMDCMS group for the SiPM calibration system

Size
45.7 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
13
Pads
79
Tracks, vias
50, 40
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
6 Jun 2023
Updated
31 Jul 2024

Overview

LEDPulser is an open-source printed circuit board by UMDCMS, from the UMDCMS/SiPMCalibHW repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.7 × 53.3 mm with 37 parts on 13 nets, routed with 50 tracks and 40 vias.

It is built around the TCBT-14+. Its parts include 5 fuses, 1 diode and 1 transistor.

Main components

1

README

LEDPulser/README.md

Fast LED pulsing

Main reference arXiv:1805.00822

Key modifications:

  • Moved high-voltage source off the LED board to a separate power supply board.
  • Increase the resistor on the collector side to boost current through the LED.
  • Addition of thermistor for temperature monitoring.

Parts

37
QtyValueFootprintReferences
5Fiducial_0.5mm_Mask1.5mmFiducial:Fiducial_0.5mm_Mask1.5mmF1, F2, F2, F3, F3
30.1uFCapacitor_SMD:C_0603_1608MetricCb1, Cb2, Cb4
20.1uFCapacitor_SMD:C_0402_1005MetricCP1, CP3
21kOhmResistor_SMD:R_0603_1608MetricRb1, Rb2
1
1100 OhmResistor_SMD:R_0805_2012MetricRP1
1100kOhmCapacitor_SMD:C_0603_1608MetricRC1
110KOhmResistor_SMD:R_0603_1608MetricRT1
110kOhmCapacitor_SMD:C_1206_3216MetricTH1
11uFCapacitor_SMD:C_0805_2012MetricCb3
11uFCapacitor_SMD:C_0603_1608MetricCP2
120pFCapacitor_SMD:C_0402_1005MetricCD1
12N2369Package_TO_SOT_THT:TO-92_HandSolderQ1
1301 OhmResistor_SMD:R_1206_3216MetricRD1
149.9 OhmResistor_SMD:R_0603_1608MetricRT2
15pFCapacitor_SMD:C_0402_1005MetricCT1
1BiasLibrary:SMA-EDGEJBIAS
1HVTestPoint:TestPoint_Pad_D1.0mmTP1
1HVLibrary:SMA-EDGEJHV
1LEDTestPoint:TestPoint_Pad_D1.0mmTP2
1MLEROY (460nm)Library:MLEROYLEDD1
1TCBT-14+Library:TCBT-14+BT1
1TEMPLibrary:SMA-EDGEJTEMP
1TriggerLibrary:SMA-EDGEJTRIG

The 32 most common of 37 parts.

More from UMDCMS/SiPMCalibHW

2
  • 2 layers65 × 56 mmRPiHatHVLVPower, the printed circuit board in 3D

    RPiHatHVLVPower

    UMDCMS/SiPMCalibHW

    Hardware design files by the UMDCMS group for the SiPM calibration system

    64 partsMIT
  • 2 layers65 × 56 mmRPiHatSensor, the printed circuit board in 3D

    RPiHatSensor

    UMDCMS/SiPMCalibHW

    Hardware design files by the UMDCMS group for the SiPM calibration system

    47 partsMIT

Similar boards

  • 2 layers94 × 49 mmRadarSystemPCB, the printed circuit board in 3D

    RadarSystemPCB

    wesleywlho/RadarSystemPCB

    693 parts1
  • 2 layers40 × 34 mmDD HIP9011, the printed circuit board in 3D

    DD HIP9011

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    37 parts1.2k
  • 2 layers53.9 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    37 parts1kGPL-3.0
  • 2 layers52 × 51.8 mmEsp32-homeassistant rf bridge, the printed circuit board in 3D

    Esp32-homeassistant rf bridge

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    37 parts915
  • 2 layers87.8 × 59.8 mmFreeDeck SMD 2020-02, the printed circuit board in 3D

    FreeDeck SMD 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    37 parts772
  • 2 layers65 × 28 mmBMS Cell Module, the printed circuit board in 3D

    BMS Cell Module

    stuartpittaway/diyBMS

    Do it yourself battery management system for Lithium ion battery packs/cells

    37 parts676GPL-3.0
  • 2 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    37 parts575GPL-2.0
  • 2 layers38.1 × 153.7 mmDEFOG PANEL, the printed circuit board in 3D

    DEFOG PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    37 parts431

Questions

How big is the LEDPulser PCB?

It measures 45.7 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LEDPulser use?

37 parts, built around the TCBT-14+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LEDPulser KiCad files?

From the UMDCMS/SiPMCalibHW repository on GitHub, at the commit this page was made from: the board is LEDPulser/LEDPulser.kicad_pcb and its schematic LEDPulser/LEDPulser.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LEDPulser design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).