
Esp32miniBT
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)

UGOKU-Oneのハードウェアリポジトリ
UGOKU One is an open-source printed circuit board by UGOKU-Lab, from the UGOKU-Lab/UGOKU-Pro repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 63 × 63 mm with 56 parts on 89 nets, routed with 631 tracks and 62 vias.
It is built around the ESP32-WROOM-32 and TB67H303HG. Its parts include 10 capacitors, 10 resistors, 8 connectors, 6 ICs and 5 switches. It belongs with the ESP32 boards of this library.
UGOKU Pro のハードウェア設計データ(KiCADデータ)のリポジトリです。
UGOKU Pro はモータやセンサを使ったロボットなどのアプリケーションを少しでも手軽にテスト、制御することを目的に開発している汎用基板です。
広く普及しているマイコンボードや無線モジュールに加え、高出力なDCモータドライバを2個搭載しています。さらに、汎用IOポートを設け幅広いアプリケーションに対応します。 AndroidアプリFlexConsoleと組み合わせることでスマートフォンから手軽に遠隔操作や監視が行えます。
| 主要搭載部品 | |
|---|---|
| マイコンボード | Nucleo-F303K8 |
| 無線モジュール | ESP32-WROOM-32E |
| DCモータドライバ | 2× TB67H303HG |
| CANトランシーバ | MCP2562-E/SN |
SnapMagic よりダウンロードしたKiCADのライブラリ(CC BY-SA)を使用しています

この データ は クリエイティブ・コモンズ 表示 4.0 国際 ライセンスの下に提供されています。
本データおよび本データにより製作した基板は良識の範囲で自由に非営利、営利問わず使用できます。また、改変、再配布も可能です。
ただし、再配布の際には本リポジトリのリンクを掲載を希望します。(本プロジェクトの目的に即した改良についてはプルリクエストを歓迎します)。
また、本データにより生じた損害等の一切の責任を負いかねますので、ご了承ください。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1μF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C9, C11, C13 |
| 4 | Jumper_NC_Dual | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4 |
| 3 | 3.3k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6 |
| 3 | Conn_01x04 | Connector_JST:JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical | CN1, CN2, CN3 |
| 3 | PTS_1.5_2 | MultiBoardMini_Libraries:PTS_1.5_2 | T1, T2, T3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R9, R12 |
| 2 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 47μF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5, C12 |
| 2 | 51kΩ | Resistor_SMD:R_0603_1608Metric | R7, R13 |
| 2 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | MJP1, MJP2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2, L3 |
| 2 | SW_Push_DPDT | MultiBoardMini_Libraries:SSSS213202 | SW3, SW5 |
| 2 | TB67H303HG | MultiBoardMini_Libraries:TO100P2930X465X1937-25 | U4, U5 |
| 1 | 120Ω | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 3.3μF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | CAN | Connector_JST:JST_XA_B03B-XASK-1_1x03_P2.50mm_Vertical | CN4 |
| 1 | Conn_01x02_Male | Connector_JST:JST_XA_B02B-XASK-1_1x02_P2.50mm_Vertical | J3 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | D | Diode_SMD:D_SOD-123 | D1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U7 |
| 1 | M78AR5-1 | MultiBoardMini_Libraries:M78AR | U1 |
| 1 | MCP2562-E_SN | MultiBoardMini_Libraries:SOIC127P600X175-8N | U6 |
| 1 | NUCLEO-F303K8 | MultiBoardMini_Libraries:MODULE_NUCLEO-F303K8 | U2 |
| 1 | PA10 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | PF1 | MultiBoardMini_Libraries:SW_TL3301FF160QG | SW1 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | RESET | MultiBoardMini_Libraries:SW_TL3301FF160QG | SW2 |
| 1 | ~ | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW4 |

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.




likeablob/slow-movie-player-7c
Yet another "Slow Movie Player" implementation with 7-color E-Paper module and ESP32.

JSnowden33/Wii-Bluetooth-Replacement
This project is a full replacement for the Nintendo Wii's Bluetooth module. Emulation of the Bluetooth module is performed on the PIC32 based on rnconrad's emulator, while controller connectivity on the ESP32 is based…
It measures 63 × 63 mm and has 2 copper layers, 1.6 mm thick.
56 parts, built around the ESP32-WROOM-32 and TB67H303HG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UGOKU-Lab/UGOKU-Pro repository on GitHub, at the commit this page was made from: the board is UGOKU-One.kicad_pcb and its schematic UGOKU-One.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).