2 layers
Full Circuit
EthanSousaProjects/CBR_Custom_Cluster
A custom cluster design for my CBR 125RW6 (2006 carb model) to replace the old large mechanical cluster with a smaller simpler design.
76 partsGPL-3.0
2 layers90 × 75 mm
Esp32s2s3dev custom
UEC-RMF-Rescue/child_robot_boardthe board to control child_robot
- Size
- 90 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 52
- Pads
- 202
- Tracks, vias
- 666, 95
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Jul 2024
- Updated
- 27 Jul 2024
Overview
Esp32s2s3dev custom is an open-source printed circuit board by UEC-RMF-Rescue, from the UEC-RMF-Rescue/child_robot_board repository on GitHub. It is a 2-layer board of 90 × 75 mm with 37 parts on 52 nets, routed with 666 tracks and 95 vias.
It is built around the ESP32-S3-DEVKITC-1-N8, R-78E3.3-0.5 and L7805. Its parts include 12 resistors, 4 ICs, 3 capacitors, 2 diodes and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-S3-DEVKITC-1-N8
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
R-78E3.3-0.5
SIP,11.5x7.6mmDC-DC Power ModulesYLPTEC
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R11, R12 |
| 4 | ~ | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | M1, M2, M3, M4 |
| 4 | ~ | my_library:drv8833_board | DRV1, DRV2, DRV3, DRV4 |
| 3 | Srv_5V | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | SRV1, SRV2, SRV3 |
| 3 | Srv_9.9V | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | SRV4, SRV5, SRV6 |
| 1 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 1 | 0.33u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 12 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9 |
| 1 | 1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 68 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U1 |
| 1 | L7805 | my_library:L7805 | U4 |
| 1 | LED_GREEN | LED_THT:LED_D3.0mm_Clear | D1 |
| 1 | LED_RED | LED_THT:LED_D3.0mm | D2 |
| 1 | R-78E3.3-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U3 |
| 1 | Vin | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J1 |
| 1 | Vout | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J2 |
| 1 | ~ | my_library:bno055_board | U2 |
Similar boards
- 4 layers100 × 50 mm
Pcm5102a mux board
cbaurtx/RetroBox
RetroBox is an internet radio using an ESP32-S3 system on a chip
86 parts - 2 layers125.2 × 86.4 mm
Embedded System Project
jastikai/Embedded-System-Project
Repository for Embedded System Project course of University of Oulu, Spring 2024.
57 parts - 2 layers127 × 114.3 mm
- 2 layers163 × 72 mm
OM-64DO
OpenModbus/OM-64DO
A compact industrial-grade 64-channel Modbus RTU output module.
231 parts21GPL-3.0 - 2 layers
- 2 layers88.9 × 106 mm
- 4 layers154.9 × 128.4 mm
Daisy hardware v1
rafkhan/lowstepper
Dual phase manipulation low frequency oscillator by Okay Synthesizer.
161 parts9
Questions
How big is the Esp32s2s3dev custom PCB?
It measures 90 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32s2s3dev custom use?
37 parts, built around the ESP32-S3-DEVKITC-1-N8, R-78E3.3-0.5 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32s2s3dev custom KiCad files?
From the UEC-RMF-Rescue/child_robot_board repository on GitHub, at the commit this page was made from: the board is esp32s2s3dev_custom/esp32s2s3dev_custom.kicad_pcb and its schematic esp32s2s3dev_custom/esp32s2s3dev_custom.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32s2s3dev custom design in my own project?
Its repository states no licence, so its author keeps all rights: ask UEC-RMF-Rescue before reusing the design.