

PCB Project
- Size
- 86 × 49 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 113
- Nets
- 92
- Pads
- 387
- Tracks, vias
- 515, 60
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Feb 2024
- Updated
- 16 Jul 2024
Overview
PCB Project is an open-source printed circuit board by UASTARR, from the UASTARR/Payload_BIOMEV2 repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 86 × 49 mm with 113 parts on 92 nets, routed with 515 tracks and 60 vias.
It is built around the MMBT2222A. Its parts include 41 capacitors, 22 resistors, 13 diodes, 11 connectors and 8 ICs.
Main components
1README
README.mdPayload_BIOMEV2
TO-DO
- UART
- ZE27-O3
- Power Distribution
- Connecting SPI and Power
Parts
113| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LED_Small | Diode_SMD:D_0603_1608Metric | D6, D7, D8, D9, D11, D12, D13 |
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C8, C9, C10, C11 |
| 6 | 100uF | Capacitor_SMD:CP_WCAP-PSHP | C13, C16, C23, C28, C33, C38 |
| 6 | 10nF | Capacitor_SMD:C_0603_1608Metric | C12, C15, C22, C27, C32, C37 |
| 6 | 120uF | Capacitor_SMD:CP_Elec_10x12.5 | C19, C21, C26, C31, C36, C41 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric | C18, C20, C25, C30, C35, C40 |
| 6 | 200 | Resistor_SMD:R_0402_1005Metric | R12, R13, R15, R16, R17, R19 |
| 6 | 6.8uF | Capacitor_SMD:C_1206_3216Metric | C14, C17, C24, C29, C34, C39 |
| 6 | 6uH | Inductor_SMD:L_6.7x6.7mm | L1, L2, L3, L4, L5, L6 |
| 6 | LM22673MRE-5.0/NOPB | Transistor_Power:MRA08B | 111, 1111, 11111, 11112, 11113, 11114 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R20, R21, R22, R23, R25 |
| 5 | 60V, 5A | Diode_SMD:D_PowerDI-5 | D1, D3, D4, D5, D10 |
| 4 | 1.8k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | Conn_01x03_Socket | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J6, J12, J13, J14 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 3 | 1µF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C5 |
| 2 | 0.1µF | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R9 |
| 2 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | ~ | Sensor:PQFN50P450X300X100-16N | U7, U8 |
| 1 | 15.6V, >3A | Diode_SMD:D_PowerDI-5 | D2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 4.7 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 45 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 800 | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | Battery Connector | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J5 |
| 1 | Motor Power Connection | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J10 |
| 1 | SPI1 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | SPI2 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | ZE27-O3 | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J11 |
| 1 | i2c1 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | i2c2 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | ~ | Sensor:XDCR_LIS3MDL | U3 |
| 1 | ~ | Sensor:XDCR_SGP41-D-R4 | U2 |
| 1 | ~ | Sensor:WSON8_DEH_TEX | U5 |
| 1 | ~ | Sensor:SOIC-8 | U6 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | U1 |
| 1 | ~ | Sensor:HNNJ | U4 |
More from UASTARR/Payload_BIOMEV2
3- 2 layers23.8 × 23.5 mm

- 2 layers22 × 21.6 mm

- 2 layers70 × 70 mm

Similar boards
- 2 layers75 × 100 mm

Phased
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
77 parts530 - 2 layers80 × 129.1 mm

Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…
75 parts303 - 2 layers80 × 107.5 mm

Minino
ElectronicCats/Minino
Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.
79 parts183GPL-3.0 - 2 layers92.8 × 71.8 mm

USBSID Pico v1.3f
LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller
116 parts125GPL-2.0 - 2 layers16.3 × 11.7 mm

Brains
atomic14/ch32v003-audio
A collection of audio projects for the CH32V003J4M6 RISC-V microcontroller, demonstrating various audio synthesis and playback techniques on an 8-pin, $0.10 microcontroller.
15 parts78MIT - 4 layers125.7 × 76.5 mm

UGC Main R4K
HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
168 parts62 - 4 layers90.2 × 95.9 mm

ADCS board
onionharvester/boardwalk
A little gathering place for my PCBs. This is their favourite hangout spot! 🪼⋆.ೃ࿔*:・
205 parts55 - 2 layers35.6 × 94.6 mm

Questions
How big is the PCB Project PCB?
It measures 86 × 49 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PCB Project use?
113 parts, built around the MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Project KiCad files?
From the UASTARR/Payload_BIOMEV2 repository on GitHub, at the commit this page was made from: the board is PCB_Project/PCB_Project.kicad_pcb and its schematic PCB_Project/Level_Shifters.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Project design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).