

A2VGA.v2.0
This is a redesign of the Apple II VGA based on the PR2350 chip with 48 GPIOs (on Clintech Pico Board) which is 5V tolerant and hence no trinsceivers would be needed.
- Size
- 92.8 × 103.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 49
- Pads
- 219
- Tracks, vias
- 292, 60
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Jul 2026
- Updated
- 21 Jul 2026
Overview
A2VGA.v2.0 is an open-source printed circuit board by Toysoft, from the Toysoft/AppleII-VGA2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 92.8 × 103.7 mm with 68 parts on 49 nets, routed with 292 tracks and 60 vias.
Its parts include 11 resistors, 1 capacitor, 1 IC and 1 diode.
README
A2VGA2/README.mdThis is a redesign of the Apple II VGA based on the PR2350 chip with 48 GPIOs (on Clintech Pico Board) which is 5V tolerant and hence no trinsceivers would be needed.
The A2VGA2 hardware design is released under the MIT License:
Board design by Ralle Palaveev, Copyright (c) 2026.
Adaptation for RP2350 by Oliver Schmidt, Copyright (c) 2026.The firmware project would be based on awesome work from the following Apple II Analog VGA projects:
AppleII-VGA. MIT License. Copyright (c) 2021-2022 Mark Aikens.
Analog Firmware. MIT License. Copyright (c) 2022-2023 David Kuder.Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | , , , , , , , , , , , , , , , +34 | ||
| 3 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R5, R8 |
| 3 | 2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R6, R9 |
| 3 | 510 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R4, R7 |
| 2 | 47 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R10, R11 |
| 2 | IDC-Header_2x04_P2.54mm_Vertical | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | H1, H2 |
| 1 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | CPB | Graphics:CPB_SMD_TH | U1 |
| 1 | DB15_Female_HighDensity_MountingHoles | Connector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm | H3 |
| 1 | D_T-1_P5.08mm_Horizontal | Diode_THT:D_T-1_P5.08mm_Horizontal | D1 |
| 1 | LOGO | OH:OH | G*** |
Similar boards
- 2 layers110 × 90 mm

- 2 layers100 × 57 mm

- 2 layers243.6 × 104.8 mm

- 2 layers100 × 35 mm

ArduI2CKeyboard
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
68 parts282 - 2 layers58 × 65 mm

- 2 layers98 × 38 mm

Bldc control ver3
pekkaroi/bldc-drive
Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller
68 parts199GPL-2.0 - 2 layers203.2 × 149.9 mm

- 2 layers347 × 156.5 mm

OF1 v1
GregTurbo/Open-Frame1
An open-source rectangle hardware project for smash, prioritizing ease of assembly and cost
68 parts120GPL-3.0
Questions
How big is the A2VGA.v2.0 PCB?
It measures 92.8 × 103.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the A2VGA.v2.0 use?
68 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the A2VGA.v2.0 KiCad files?
From the Toysoft/AppleII-VGA2 repository on GitHub, at the commit this page was made from: the board is A2VGA2/A2VGA.v2.0.kicad_pcb and its schematic A2VGA2/A2VGA.v2.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the A2VGA.v2.0 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).