4 layers76 × 178 mm
2 layers76 × 135 mm
Connector board
TommyPersson/modular-keypads- Size
- 76 × 135 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 63
- Pads
- 206
- Tracks, vias
- 402, 358
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 14 Sep 2025
- Updated
- 7 Nov 2026
Overview
Connector board is an open-source printed circuit board by TommyPersson, from the TommyPersson/modular-keypads repository on GitHub. It is a 2-layer board of 76 × 135 mm with 62 parts on 63 nets, routed with 402 tracks and 358 vias.
It is built around the AP2171WG and F3311A7H121024E200. Its parts include 22 resistors, 15 diodes, 11 capacitors, 7 connectors and 3 ICs.
Main components
2
AP2171WG
SOT-25-5-40℃~+85℃ 1 1A 2.7V~5.5V 95mΩ Active High High Side Switch Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-25-5 Power Distribution Switches ROHSDiodes IncorporatedPower Distribution SwitchesF3311A7H121024E200
SMD,P=0.5mm,卧贴-55℃~+85℃ 0.3mm 0.5mm 1.02mm 24P Double-Sided Contacts, Top and Bottom Entry Gold Hinged Lid Phosphor bronze Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSAmphenolFFC, FPC (Flat Flexible) Connector Assemblies
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R6, R7, R8, R9, R11, R12, R13, R14, R20, R23, R26 |
| 9 | TVS | Package_TO_SOT_SMD:SOT-723 | D1, D2, D4, D5, D7, D8, D13, D15, D18 |
| 6 | 1 | Resistor_SMD:R_0805_2012Metric | R16, R17, R18, R19, R24, R25 |
| 6 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C5, C6, C12, C13, C14, C15 |
| 6 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 6 | TVS | Diode_SMD:Nexperia_CFP3_SOD-123W | D10, D11, D12, D14, D16, D17 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C11 |
| 2 | 10 uF | Capacitor_SMD:C_1206_3216Metric | C1, C3 |
| 2 | AP2171W | Package_TO_SOT_SMD:SOT-23-5 | U2, U3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 74CBTLV3861BQ,118 | EasyEDA:DHVQFN24_L5.5-W3.5-P0.50-BL-EP | U6 |
| 1 | F3311A7H121024E200 | SnapEDA-Footprints:AMPHENOL_F3311A7H121024E200 | J7 |
More from TommyPersson/modular-keypads
11- 4 layers127 × 55 mm
- 4 layers127 × 50.8 mm
- 4 layers76 × 40 mm
- 2 layers127 × 50.8 mm
- 4 layers76 × 40 mm
- 4 layers50 × 30 mm
- 4 layers68 × 40 mm
- 4 layers68 × 40 mm
- 4 layers68 × 40 mm
- 4 layers68 × 40 mm
Similar boards
- 2 layers36 × 58 mm
Ups adaptor
aronreid/ups-to-esp32
Put a USB-only UPS on the network: an ESP32-S3 board and firmware that serves NUT on TCP 3493, with a web UI. No host computer, no Raspberry Pi.
38 parts130GPL-3.0 - 4 layers71.5 × 71.5 mm
Elixir
golioth/elixir-hw
An open source hardware device that has cellular, wifi, bluetooth, GPS, and more!
249 parts36CERN-OHL-P-2.0 - 2 layers75 × 55 mm
Wellfed bench
Isaac-Duarte/wellfed
Open firmware that runs the PETLIBRO Granary PLAF103 pet feeder on your own Wi-Fi: no cloud, no account. Early and in testing.
93 parts8MIT - 2 layers22.5 × 16.5 mm
- 4 layers50 × 70 mm
- 2 layers127 × 90 mm
Radio usb
SP8EBC/radio-usb-interface
USB <--> Land Mobile Radio interace with full ground isolation on 2way audio and PTT control
225 parts3 - 8 layers45.2 × 29.7 mm
- 4 layers101.6 × 101.6 mm
Avionus Flight Controller
leptun/Avionus_Flight_Controller
Controller board for autonomous RC plane
287 parts1GPL-3.0
Questions
How big is the Connector board PCB?
It measures 76 × 135 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Connector board use?
62 parts, built around the AP2171WG and F3311A7H121024E200. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Connector board KiCad files?
From the TommyPersson/modular-keypads repository on GitHub, at the commit this page was made from: the board is pcb/module-c/connector-board-r2/connector-board.kicad_pcb and its schematic pcb/epaper-driver/epaper-driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Connector board design in my own project?
Its repository states no licence, so its author keeps all rights: ask TommyPersson before reusing the design.