

- -ofilename output filemane - -llist listing filename - -vvalue verbosity level - -fvalue - 1 default - 2 RAS - 3 RAW - data only
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 141
- Pads
- 163
- Tracks, vias
- 313, 19
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 May 2025
- Updated
- 2 Jun 2025
Overview
KX T30810 is an open-source printed circuit board by TomasPavlovicPavlo, from the TomasPavlovicPavlo/Panasonic_PBX_interface repository on GitHub. It is a 2-layer board with 20 parts on 141 nets, routed with 313 tracks and 19 vias.
It is built around the HD63B03XP, 74LS139PC and 74LS32SC. Its parts include 12 resistors and 4 ICs.
Main components
3README
README.mdPanasonic_PBX_interface

DIN packets
| start | ID | byte_0 | byte_1 | byte_2 | byte_3 | byte_4 | parity | stop | ||
|---|---|---|---|---|---|---|---|---|---|---|
| bites | 1 | 4 | 8 | 8 | 8 | 8 | 8 | 1 | 1 | = 47 |
| LCD <0-3> | 1 | 0001 | LCD_0 | LCD_1 | LCD_2 | LCD_3 | 0x00 | P | 1 | |
| LCD <4-7> | 1 | 0010 | LCD_4 | LCD_5 | LCD_6 | LCD_7 | 0x00 | P | 1 | |
| LCD <8-11> | 1 | 0011 | LCD_8 | LCD_9 | LCD_10 | LCD_11 | 0x00 | P | 1 | |
| LCD <12-15> | 1 | 0100 | LCD_12 | LCD_13 | LCD_14 | LCD_15 | 0x00 | P | 1 | |
| 1 | 0101 | P | 1 | |||||||
| 1 | 0110 | P | 1 |
disassemble FW dump
./f9dasm -begin 0x3000 -6303 -noflex -addr -out out.asm KX-T30810B_FW.BIN -info info.infoassemble source code
./dasm pokus/pokus.asm -oout.bin -llist -v1 -f3- -ofilename output filemane
- -llist listing filename
- -vvalue verbosity level
- -fvalue
- 1 default
- 2 RAS
- 3 RAW - data only
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R_Small | _mine:R_Axial_L3.6mm_D1.6mm_P4.5mm_Horizontal | R110, R111, R112, R113, R114, R115, R116, R117, R133, R134 |
| 3 | R_Network08 | Resistor_THT:R_Array_SIP9 | Z100, Z101, Z102 |
| 2 | 2k2 | Resistor_SMD:R_0805_2012Metric | R916, R917 |
| 1 | 4066 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | 74LS139 | Package_DIP:CERDIP-16_W7.62mm_SideBrazed | IC104 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm | IC107 |
| 1 | HD63B03XP | _mine:DIP-64_1.778 | IC100 |
| 1 | R_Network03 | Resistor_THT:R_Array_SIP4 | RN1 |
Similar boards
- 2 layers231.1 × 106.7 mm

- 2 layers125 × 98 mm

3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers370.8 × 298.5 mm

8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142 - 2 layers162.2 × 134.6 mm

- 2 layers

- 4 layers340 × 210 mm

- 2 layers111.8 × 121.9 mm

- 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12
Questions
What parts does the KX T30810 use?
20 parts, built around the HD63B03XP, 74LS139PC and 74LS32SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KX T30810 KiCad files?
From the TomasPavlovicPavlo/Panasonic_PBX_interface repository on GitHub, at the commit this page was made from: the board is HW/KX-T30810/KX-T30810.kicad_pcb and its schematic HW/KX-T30810/KX-T30810.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KX T30810 design in my own project?
Its repository states no licence, so its author keeps all rights: ask TomasPavlovicPavlo before reusing the design.