Skip to the content
2 layers49 × 44.5 mmProyecto Grado, the printed circuit board in 3D

Non-contact electric-field sensor with INA114 front-end + USB-C — KiCad hardware (CC BY 4.0)

Size
49 × 44.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
76
Pads
206
Tracks, vias
374, 18
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Jul 2026
Updated
15 Jul 2026

Overview

Proyecto Grado is an open-source printed circuit board by TomasOsP, from the TomasOsP/electric-field-sensor repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 49 × 44.5 mm with 33 parts on 76 nets, routed with 374 tracks and 18 vias.

It is built around the ESP32-WROOM-32, MLX90393ELW-ABA-012-RE and AMS1117-3.3. Its parts include 12 resistors, 8 capacitors, 4 ICs, 3 connectors and 3 switches. It belongs with the sensors and measurement boards and the ESP32 boards of this library.

Main components

3

README

README.md

Electric-Field Sensor

License: CC BY 4.0 KiCad

Undergraduate degree project: a non-contact electric-field sensor with an instrumentation-amplifier analog front-end and a USB interface for data acquisition on a host computer. Designed in KiCad as a set of SMD boards.

📷 Board photo coming soon. A 3D render of the test board is included at PlacaPrueba/PCBPlacaPrueba.glb (and a STEP model at PlacaPrueba/PlacaPrueba.step).

Overview

The board senses a weak electric field through a front-end instrumentation amplifier (INA114) followed by a TL082 op-amp stage for further conditioning. An on-board AMS1117-3.3 regulator supplies the analog and digital sections, and a CP2102N USB-UART bridge with a USB-C connector streams data to a host over a standard virtual COM port — no external programmer or interface hardware required.

The sensing electrode connects through a keyed JST-EH header, keeping the high-impedance front end away from the digital section of the board.

Boards in this repository

This is a multi-board KiCad workspace built up over the project:

BoardRoleStatus
Proyecto_Grado (root)Main sensor board — INA114 front-end + USB interfaceSchematic + PCB
PlacaPrueba/Test / bring-up boardSchematic + PCB (+ 3D/STEP)
Capacitancia/Capacitance-measurement variantPCB layout
ElectricFieldSensor/Early explorationPlaceholder

Key Specs

FunctionNon-contact electric-field sensing + USB data acquisition
Front endINA114 instrumentation amplifier
Signal conditioningTL082 dual op-amp
PowerAMS1117-3.3 LDO regulator (3.3 V)
Host interfaceCP2102N USB-UART bridge, USB-C connector
Electrode inputJST-EH 4-pin
ConstructionSurface-mount (0805 / 1206, SOT/QFN)

Bill of Materials (main board)

Ref(s)ValueQtyNotes
U5INA1141Instrumentation amplifier (front end)
U4TL0821Dual op-amp, conditioning stage
U1AMS1117-3.313.3 V LDO, SOT-223
U3CP2102N1USB-UART bridge, QFN-28
J7USB-C receptacle1USB 2.0, 16-pin
J1JST-EH 4-pin1Electric-field electrode input
R1, R2, R410 kΩ30805
R6, R75.1 kΩ20805 (USB-C CC)
R8, R90 Ω20805 (jumpers)
R3, R122 kΩ20805
R5220 Ω10805
R1047.5 kΩ10805
R1122.1 kΩ10805
C1, C2, C5, C7, C80.1 µF51206, decoupling
C3, C422 µF21206
C64.7 µF11206

Full machine-generated CSV: docs/bom.csv. (Simulation-only sources such as the 60 Hz / 9 V SPICE symbols are omitted from the table above.)

Repository Layout

text
Proyecto_Grado.kicad_pro / .kicad_sch / .kicad_pcb   Main board KiCad source
Proyecto_Grado.csv                                    Original exported BOM
Capacitancia/                                         Capacitance-measurement board
PlacaPrueba/                                           Test board (+ STEP & GLB models)
ElectricFieldSensor/                                   Early exploration board
docs/electric-field-sensor-schematic.pdf              Main schematic (PDF)
docs/bom.csv                                           Bill of materials
fab/…-gerbers.zip                                      Gerbers + drill (main board)

Manufacturing

The fab/ folder contains a Gerber + drill package for the main board. Open the KiCad project to regenerate outputs or modify the design (KiCad 8+).

License

Hardware design files are released under Creative Commons Attribution 4.0 International (CC BY 4.0). You may share and adapt the design, including commercially, as long as you give appropriate credit.


Designed by Tomás Ospina.

Parts

33
QtyValueFootprintReferences
30.1uF/50V(10%)Capacitor_SMD:C_1206_3216MetricC5, C7, C8
3SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2, SW3
20(5%)Resistor_SMD:R_0805_2012MetricR8, R9
20.1uFCapacitor_SMD:C_1206_3216MetricC1, C2
210kResistor_SMD:R_0805_2012MetricR1, R2
25.1KResistor_SMD:R_0805_2012MetricR6, R7
2LEDLED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mmD1, D2
1+5VTestPoint:TestPoint_Pad_D1.5mmTP1
110K(5%)Resistor_SMD:R_0805_2012MetricR4
122.1KResistor_SMD:R_0805_2012MetricR11
1220Resistor_SMD:R_0805_2012MetricR5
122uF/10V(20%)Capacitor_SMD:C_1206_3216MetricC4
122uF/10v(20%)Capacitor_SMD:C_1206_3216MetricC3
12KResistor_SMD:R_0805_2012MetricR12
12K(5%)Resistor_SMD:R_0805_2012MetricR3
14.7uF/6.3V(10%)Capacitor_SMD:C_1206_3216MetricC6
147.5KResistor_SMD:R_0805_2012MetricR10
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1CP2102N-Axx-xQFN28Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mmU3
1Conn_01x04_PinConnector_JST:JST_EH_S4B-EH_1x04_P2.50mm_HorizontalJ6
1EF SensorConnector_JST:JST_EH_S4B-EH_1x04_P2.50mm_HorizontalJ1
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U2
1MLX90393ELW-ABA-012-REMLX90393:QFN50P300X300X100-17N-DIC1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ7

More from TomasOsP/electric-field-sensor

2
  • 2 layers92.4 × 64.2 mmPlacaPrueba, the printed circuit board in 3D

    PlacaPrueba

    TomasOsP/electric-field-sensor

    Non-contact electric-field sensor with INA114 front-end + USB-C — KiCad hardware (CC BY 4.0)

    21 partsCC-BY-4.0
  • 2 layers42 × 42 mmCapacitancia, the printed circuit board in 3D

    Capacitancia

    TomasOsP/electric-field-sensor

    Non-contact electric-field sensor with INA114 front-end + USB-C — KiCad hardware (CC BY 4.0)

    19 partsCC-BY-4.0

Similar boards

  • 2 layers90 × 76.5 mmLCDZapperPro, the printed circuit board in 3D

    LCDZapperPro

    charcole/LCDZapper

    Device for making light gun games playable on LCD TVs

    126 parts163
  • 2 layers85 × 56 mmHB RF ETH, the printed circuit board in 3D

    HB RF ETH

    alexreinert/PCB

    Some of my PCBs

    96 parts104
  • 2 layers62.2 × 30.5 mmWLED ESP32 Controller, the printed circuit board in 3D

    WLED ESP32 Controller

    Hasenpups/WLED_ESP32_Controller

    This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].

    24 parts44
  • 2 layers150 × 50 mmEsp32-led smps, the printed circuit board in 3D

    Esp32-led smps

    lucysrausch/esp32-led-smps

    230V main LED smps. 2x30W Constant Current.

    179 parts30
  • 2 layers40 × 68 mmMULTIGW, the printed circuit board in 3D

    MULTIGW

    nuclearcat/ESP32ETH

    Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible

    32 parts30LGPL-2.1
  • 2 layers259.5 × 60.7 mm1512hh control, the printed circuit board in 3D

    1512hh control

    larryqiann/AP1512HH-ESP32

    Coway AP1512HH Main Board replacement with ESP32

    71 parts29CERN-OHL-P-2.0
  • 2 layers139.7 × 88.9 mmCharge Controller, the printed circuit board in 3D

    Charge Controller

    jharvey/Charge_Controller

    MPPT hardware which uses FUGU firmware

    163 parts24

Questions

How big is the Proyecto Grado PCB?

It measures 49 × 44.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Proyecto Grado use?

33 parts, built around the ESP32-WROOM-32, MLX90393ELW-ABA-012-RE and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Proyecto Grado KiCad files?

From the TomasOsP/electric-field-sensor repository on GitHub, at the commit this page was made from: the board is Proyecto_Grado.kicad_pcb and its schematic Capacitancia/Capacitancia.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Proyecto Grado design in my own project?

Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).