Skip to the content
2 layers91.5 × 46.6 mmBuck Converter Circuit, the printed circuit board in 3D

A simple synchronous buck converter designed for ENEL373 at the University of Canterbury for the solar car project.

Size
91.5 × 46.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
23
Pads
99
Tracks, vias
219, 0
Pours
3
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
18 May 2024
Updated
18 May 2024

Overview

Buck Converter Circuit is an open-source printed circuit board by Tobi-McKellar, from the Tobi-McKellar/Synchronous_Buck_ENEL373 repository on GitHub. It is a 2-layer board of 91.5 × 46.6 mm with 27 parts on 23 nets, routed with 219 tracks and 0 vias.

It is built around the IRS21844PBF and TL494. Its parts include 9 capacitors, 7 resistors, 4 connectors, 2 ICs and 2 transistors. It belongs with the power boards of this library.

Main components

2

README

README.md

Synchronous_Buck_ENEL373

A simple synchronous buck converter designed for ENEL373's Solar Car Project the University of Canterbury. Although the project specification only asked for a regular buck converter, I and my group decided that a synchronous converter would give us a better chance of winning the race due to the extra efficiency a synchronous converter provides.

Synchronous_Buck_3DView

Parts

27
QtyValueFootprintReferences
4Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ101, J102, J103, J104
3RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R5, R6
210Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR102, R103
2100nCapacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mmC103, C104
2NMOSPackage_TO_SOT_THT:TO-220-3_VerticalQ101, Q102
1100nCapacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mmC5
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR101
110nCapacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mmC101
112kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
116uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
11nCapacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mmC3
1330uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2
194uCustomFootprints:B65812C1512T001L1
1CCapacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mmC4
1Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mmCapacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mmC102
1IRS21844Package_DIP:DIP-14_W7.62mmU101
1R_PotentiometerPotentiometer_THT:Potentiometer_ACP_CA6-H2,5_HorizontalRV1
1TL494Package_DIP:DIP-16_W7.62mmU1
1UC_D_SCHOTTKYDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD101

Similar boards

  • 2 layers224.2 × 153.7 mmStand, the printed circuit board in 3D

    Stand

    radiolok/dekatronpc

    DekatronPC - vacuum tube and cold-cathode tube based computer

    196 parts17
  • 2 layers99.3 × 98.6 mmFlexiblePS, the printed circuit board in 3D

    FlexiblePS

    profdc9/FlexibleCharger

    An Arduino-controlled charger for different kinds of batteries, or it can be a standalone power supply

    118 parts13
  • 2 layers61.6 × 53.7 mmOsborne floppy emulator, the printed circuit board in 3D

    Osborne floppy emulator

    khaddra/osborne-floppy-emulator

    Floppy disk drive emulator for the Osborne 1. Unfinished.

    82 parts2
  • 2 layers177.4 × 65.5 mmFuente smps 250w, the printed circuit board in 3D

    Fuente smps 250w

    picli3/dc-dc_250w_tl494

    fuente de poder de 12 a +/- 33V

    51 parts1
  • 2 layers100 × 50 mmRPS ATX, the printed circuit board in 3D

    RPS ATX

    Aborav/PCB_RPS

    ATX voltage/current control PCB

    75 parts
  • 2 layers58 × 34 mmPCB, the printed circuit board in 3D

    PCB

    Aborav/PCB_VAW_Meter

    Volt / Amp / Watt meter MCU board

    30 parts
  • 2 layers70.5 × 53 mmSolarCar, the printed circuit board in 3D

    SolarCar

    jaimeuydebaron/Solar-Powered-RC-Car

    To make it easy for you to get started with GitLab, here's a list of recommended next steps.

    46 parts
  • 2 layers44 × 35 mmTL494, the printed circuit board in 3D

    TL494

    picli3/pwm-controller-tl494

    Módulo de control PWM basado en TL494, pensado como cerebro de una fuente conmutada o convertidor de potencia.

    17 parts

Questions

How big is the Buck Converter Circuit PCB?

It measures 91.5 × 46.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Buck Converter Circuit use?

27 parts, built around the IRS21844PBF and TL494. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Buck Converter Circuit KiCad files?

From the Tobi-McKellar/Synchronous_Buck_ENEL373 repository on GitHub, at the commit this page was made from: the board is Buck_Converter_Circuit.kicad_pcb and its schematic Buck_Converter_Circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Buck Converter Circuit design in my own project?

Its repository states no licence, so its author keeps all rights: ask Tobi-McKellar before reusing the design.