Skip to the content
2 layers45 × 45 mmDual relay, the printed circuit board in 3D

Two relays to switch AC/DC devices

Size
45 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
27
Pads
84
Tracks, vias
235, 35
Pours
4
Routed
Yes
KiCad
KiCad 4
Created
24 Aug 2011
Updated
6 Jul 2022

Overview

Dual relay is an open-source printed circuit board by Tinkerforge, from the Tinkerforge/dual-relay-bricklet repository on GitHub. It is a 2-layer board of 45 × 45 mm with 34 parts on 27 nets, routed with 235 tracks and 35 vias.

It is built around the 2N7002P and LL4148. Its parts include 8 ICs, 6 diodes, 4 resistors, 4 connectors and 3 capacitors. It belongs with the home automation and IoT boards of this library.

Main components

2

README

README.rst

Dual Relay Bricklet

This repository contains the firmware source code and the hardware design files. The documentation generator configs can be found at https://github.com/Tinkerforge/generators

Repository Content

software/:

  • examples/: Examples for all supported languages
  • build/: Compiled files
  • src/: Source code of firmware
  • Makefile: Makefile to build project

hardware/:

  • Contains KiCad project files and additionally schematics as PDF

datasheets/:

  • Contains datasheets for sensors and complex ICs that are used

Hardware

The hardware is designed with the open source EDA Suite KiCad (http://www.kicad.org). Before you are able to open the files, you have to install the Tinkerforge kicad-libraries (https://github.com/Tinkerforge/kicad-libraries). You can either clone them directly in hardware/ or clone them in a separate folder and symlink them into hardware/ (ln -s kicad_path/kicad-libraries project_path/hardware). After that you can open the .pro file in hardware/ with KiCad and from there view and modify the schematics and the PCB layout.

Software

If you want to do your own Brick/Bricklet firmware development we highly recommend that you use our build environment setup script and read the tutorial (https://www.tinkerforge.com/en/doc/Tutorials/Tutorial_Build_Environment/Tutorial.html).

To compile the C code we recommend you to install the newest GNU Arm Embedded Toolchain (https://launchpad.net/gcc-arm-embedded/+download). You also need to install bricklib (https://github.com/Tinkerforge/bricklib) and brickletlib (https://github.com/Tinkerforge/brickletlib).

You can either clone it directly in software/src/ or clone it in a separate folder and symlink it into software/src/ (ln -s bricklib_path/bricklib project_path/software/src/ and ln -s brickletlib_path/brickletlib project_path/software/src/). Finally make sure to have CMake installed (http://www.cmake.org/cmake/resources/software.html).

After that you can build the firmware by invoking make in software/. The firmware (.bin) can then be found in software/build/ and uploaded with brickv (click button "Flashing" on start screen).

Parts

34
QtyValueFootprintReferences
41kkicad-libraries:R0603ER1, R2, R3, R4
4DRILLkicad-libraries:DRILL_NPU5, U6, U7, U8
3AKL_5_2kicad-libraries:AKL_5_2J1, J2, J3
212Vkicad-libraries:MiniMelfD3, D5
21µFkicad-libraries:C0805C1, C3
22N7002Pkicad-libraries:SOT23GDSQ1, Q2
2LED bluekicad-libraries:D0603ED1, D2
2LL4148kicad-libraries:MiniMelfD4, D6
2ORWH-SXkicad-libraries:ORWH-SXU2, U3
2VAL**Fiducial_MarkFiducial_Mark, Fiducial_Mark
10Rkicad-libraries:C0603EFB2
1100nFkicad-libraries:C0603EC2
14.7µHkicad-libraries:NRH3015FB1
1CE_5mmCE_5mmVAL
1CM1293Akicad-libraries:SC-74U4
1CON-SENSORkicad-libraries:CON-SENSORP1
1M24C64kicad-libraries:SO-8U1
1Val**Logo_31x31Ref**
1WEEE_7mmWEEE_7mmVAL

Similar boards

  • 4 layers199.9 × 69.3 mmZaphod controller, the printed circuit board in 3D

    Zaphod controller

    Scottapotamas/zaphod-bot

    A DIY high performance delta-bot for fun, and lightpainting...

    251 parts53
  • 2 layers38 × 65 mmSpe sink, the printed circuit board in 3D

    Spe sink

    Scottapotamas/spe-marine-node

    Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)

    99 parts34MIT
  • 2 layers39.6 × 23.2 mmDetector, the printed circuit board in 3D

    Detector

    Ttl/detector

    RF power detector board design files

    52 parts20
  • 2 layers120 × 80 mmTrackerAVL, the printed circuit board in 3D

    TrackerAVL

    brengi/CESE-PCB

    Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos

    173 parts7
  • 2 layers42.5 × 62.5 mmEvse, the printed circuit board in 3D

    Evse

    Tinkerforge/evse-bricklet

    This Bricklet together with the ESP32 Brick the RS485 Bricklet and the NFC Bricklet form the hardware used in the WARP Charger

    92 parts3
  • 4 layers84 × 56.5 mmUsb xwitch, the printed circuit board in 3D

    Usb xwitch

    RunLit/usb-xwitch

    A software controlled usb switch

    149 parts2
  • 2 layers86 × 78.3 mmEta game system, the printed circuit board in 3D

    Eta game system

    antonloof/eta_game_system

    testing to drive tls3001 leds with a pico

    83 parts

Questions

How big is the Dual relay PCB?

It measures 45 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dual relay use?

34 parts, built around the 2N7002P and LL4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dual relay KiCad files?

From the Tinkerforge/dual-relay-bricklet repository on GitHub, at the commit this page was made from: the board is hardware/dual-relay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dual relay design in my own project?

Its repository states no licence, so its author keeps all rights: ask Tinkerforge before reusing the design.