
Esp32s3aprs
mcapdeville/esp32s3aprs
ESP32s3 APRS beacon/tracker/logger, USB kiss TNC , USB audio FM tranceiver with Micropython shell

Measures distance up to 150cm with infrared light
Distance ir v2 is an open-source printed circuit board by Tinkerforge, from the Tinkerforge/distance-ir-v2-bricklet repository on GitHub. It is a 2-layer board of 18.9 × 44.6 mm with 25 parts on 19 nets, routed with 152 tracks and 21 vias.
It is built around the S3B-PH-SM4-TB. Its parts include 5 capacitors, 4 connectors, 3 resistors, 3 ICs and 2 diodes.
This repository contains the firmware source code and the hardware design files. The documentation generator configs can be found at https://github.com/Tinkerforge/generators
software/:
hardware/:
datasheets/:
The hardware is designed with the open source EDA Suite KiCad (http://www.kicad.org). Before you are able to open the files, you have to install the Tinkerforge kicad-libraries (https://github.com/Tinkerforge/kicad-libraries). You can either clone them directly in hardware/ or clone them in a separate folder and symlink them into hardware/ (ln -s kicad_path/kicad-libraries project_path/hardware). After that you can open the .pro file in hardware/ with KiCad and from there view and modify the schematics and the PCB layout.
If you want to do your own Brick/Bricklet firmware development we highly recommend that you use our build environment setup script and read the tutorial (https://www.tinkerforge.com/en/doc/Tutorials/Tutorial_Build_Environment/Tutorial.html).
To compile the C code we recommend you to install the newest GNU Arm Embedded Toolchain (https://launchpad.net/gcc-arm-embedded/+download). You also need to install bricklib2 (https://github.com/Tinkerforge/bricklib2).
You can either clone it directly in software/src/ or clone it in a separate folder and symlink it into software/src/ (ln -s bricklib_path/bricklib2 project_path/software/src/). Finally make sure to have CMake installed (http://www.cmake.org/cmake/resources/software.html).
After that you can build the firmware by invoking make in software/. The firmware (.zbin) can then be found in software/build/ and uploaded with brickv (click button "Flashing" on start screen).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | VAL** | kicad-libraries:Fiducial_Mark | Fiducial_Mark, Fiducial_Mark, Fiducial_Mark |
| 2 | 1k | kicad-libraries:R0603F | R2, R4 |
| 2 | DRILL | kicad-libraries:DRILL_NP | U2, U3 |
| 1 | 100nF | kicad-libraries:C0603E | C1 |
| 1 | 100µF/10V | kicad-libraries:3528-21 | C2 |
| 1 | 10uF | C0805 | C4 |
| 1 | 1k | R0603F | R3 |
| 1 | 1uF | C0603F | C5 |
| 1 | 220pF | C0402E | C3 |
| 1 | 82 | 4X0402 | RP1 |
| 1 | BOOT | kicad-libraries:SolderJumper | P3 |
| 1 | CE_5mm | kicad-libraries:CE_5mm | VAL |
| 1 | CON-SENSOR2 | kicad-libraries:CON-SENSOR2 | P1 |
| 1 | DEBUG | kicad-libraries:DEBUG_PAD | P2 |
| 1 | LOGO | kicad-libraries:Logo_CoMCU | G*** |
| 1 | S3B-PH-SM4 | kicad-libraries:S3B-PH-SM4 | P4 |
| 1 | Val** | kicad-libraries:Logo_31x31 | Ref** |
| 1 | WEEE_7mm | kicad-libraries:WEEE_7mm | VAL |
| 1 | XMC1302 | kicad-libraries:QFN24-4x4mm-0.5mm | U4 |
| 1 | blue | D0603E | D1 |
| 1 | green | kicad-libraries:D0603E | D2 |

mcapdeville/esp32s3aprs
ESP32s3 APRS beacon/tracker/logger, USB kiss TNC , USB audio FM tranceiver with Micropython shell

generationmake/CyphalPicoBase-CAN
Board for the Raspberry Pi Pico to connect via CAN using OpenCyphal and UCANPHY Micro


lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices

dataehora/beatconfused
A small web studio of fast, elegant, install-free music tools. Every tool is plain HTML, CSS and vanilla JavaScript with the Web Audio API — no build step, no dependencies, no accounts, works offline after first load.



ricknoboa137/BioZ-muscle-monitor
A portable, battery-powered bioimpedance spectroscopy (BIS) device that measures biceps muscle impedance during and after exercise, to track fatigue and fluid shift.
It measures 18.9 × 44.6 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the S3B-PH-SM4-TB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tinkerforge/distance-ir-v2-bricklet repository on GitHub, at the commit this page was made from: the board is hardware/distance-ir-v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Tinkerforge before reusing the design.