Skip to the content
2 layers260.2 × 100.6 mmNon nemo low, the printed circuit board in 3D

Non-Nemo: Ortholinear 3x5 Split Keyboards

Size
260.2 × 100.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
96
Nets
79
Pads
698
Tracks, vias
524, 6
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Apr 2025
Updated
15 Jun 2025

Overview

Non nemo low is an open-source printed circuit board by Thunderbird2086, from the Thunderbird2086/non-nemo repository on GitHub, published under the MIT licence. It is a 2-layer board of 260.2 × 100.6 mm with 96 parts on 79 nets, routed with 524 tracks and 6 vias.

Its parts include 36 diodes, 36 switches, 10 crystals and 4 connectors. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

README

wireless/non-nemo-low/README.md

난네모 Low Profile

BOM

ComponentQuantityDescription
Xiao BLE2MCU
1N4148W36SMD 1206 SOD-123
Choc Hotswap sockets36Hotswap sockets compatible with Choc switches
Choc Keyswitches36Choc compatible keyswitches
Choc Key caps36Choc compatible keycaps
PCB1
Switch2SPDT PCM12
2P connector2Molex Pico EZmate 78171
top plate1Low Profile
bottom plate1Low Profile
M2 screw32M2x5mm
M2 spacer16M2x5mm
LiPo battery23.7V 500mAh 303450
Rubber foot88x3mm

Opitinal parts

ComponentQuantityDescription
Tactile Push Button2SMD 2x4x3.5mm
Pogopin 1x22Height 5.5mm
Pogopin 1x24Height 4.5mm

PCB

Case

Plates

Parts

96
QtyValueFootprintReferences
36DTB2086_SMD:TB2086_SMD_D3_SMDD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20
36SW_CHOC_HSTB2086_KEYSWITCH:SW_choc_v1_v2_HS_1uS1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +20
105.5mmmousebites_5p5mm_easysnapX1, X2, X3, X4, X5, X6, X7, X8, X9, X10
2ceoloide:utility_ergogen_logoLOGO1, LOGO3
2undefinedLOGO2, LOGO4
2Conn_01x02TB2086_MISC:Tag_Pogopin_1x02_P2.54mmJ1, J2
2Conn_BATTB2086_MISC:Molex_Pico-EZmate_78171-0002_1x02-1MP_P1.20mm_HandSolderJ3, J4
2SMT 2X4X3.5MM Tactile Tact Push ButtonTB2086_SMD:SMT 2X4X3.5MM Tactile Tact Push ButtonRSW1, RSW2
2Xiao nRF52840TB2086_MCU:Xiao_nRF52840_edgecutMCU1, MCU2
1SW_SPDT1TB2086_SMD:SW_SPDT_PCM12SW_SPDT1
1SW_SPDT2TB2086_SMD:SW_SPDT_PCM12SW_SPDT2

More from Thunderbird2086/non-nemo

2
  • 2 layers273.7 × 107 mmNon nemo chimera wired, the printed circuit board in 3D

    Non nemo chimera wired

    Thunderbird2086/non-nemo

    Non-Nemo: Ortholinear 3x5 Split Keyboards

    94 parts2MIT
  • 2 layers273.7 × 107 mmBottom mx, the printed circuit board in 3D

    Bottom mx

    Thunderbird2086/non-nemo

    Non-Nemo: Ortholinear 3x5 Split Keyboards

    20 parts2MIT

Similar boards

  • 2 layers101.8 × 57.8 mmSc64v2, the printed circuit board in 3D

    Sc64v2

    Polprzewodnikowy/SummerCart64

    SummerCart64 - a fully open source N64 flashcart

    96 parts1.2kGPL-3.0
  • 2 layers55 × 80 mmBoard esp32, the printed circuit board in 3D

    Board esp32

    sudomesh/disaster-radio

    A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

    96 parts1.1k
  • 2 layers100.5 × 218.3 mmTraktorino, the printed circuit board in 3D

    Traktorino

    silveirago/traktorino

    The open-source DIY MIDI Controller for DJs.

    96 parts220
  • 2 layers255.9 × 99.3 mmZerosprey42, the printed circuit board in 3D

    Zerosprey42

    beekeeb/zerosprey42

    Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.

    96 parts140
  • 2 layers92.8 × 71.8 mmUSBSID Pico v1.0, the printed circuit board in 3D

    USBSID Pico v1.0

    LouDnl/USBSID-Pico

    USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller

    96 parts125GPL-2.0
  • 2 layers138.4 × 91.4 mmSTM32 MegaBlaster, the printed circuit board in 3D

    STM32 MegaBlaster

    AidanHockey5/STM32_VGM_Player_YM2612_SN76489

    A Sega Genesis music player based off of the STM32 BluePill board and real YM2612+SN76489 sound chips.

    96 parts117AGPL-3.0
  • 2 layers75.1 × 66.8 mmFroggyswadge, the printed circuit board in 3D

    Froggyswadge

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    96 parts114
  • 2 layers85 × 56 mmHB RF ETH, the printed circuit board in 3D

    HB RF ETH

    alexreinert/PCB

    Some of my PCBs

    96 parts104

Questions

How big is the Non nemo low PCB?

It measures 260.2 × 100.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Non nemo low use?

96 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Non nemo low KiCad files?

From the Thunderbird2086/non-nemo repository on GitHub, at the commit this page was made from: the board is wireless/non-nemo-low/non_nemo_low.kicad_pcb and its schematic plates/chimera/bottom_chimera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Non nemo low design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).