2 layers30 × 35 mm
Kicad Tweezers
ThomasVDD/SmartSoldering
SmartSoldering - Weller compatible soldering station
8 parts1GPL-3.0
4 layers100 × 50 mm
SolderingRT1
ThomasVDD/SmartSoldering1SmartSoldering - Weller compatible soldering station
- Size
- 100 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 67
- Pads
- 324
- Tracks, vias
- 554, 256
- Pours
- 22
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Jan 2021
- Updated
- 5 Jan 2021
Overview
SolderingRT1 is an open-source printed circuit board by ThomasVDD, from the ThomasVDD/SmartSoldering repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 50 mm with 99 parts on 67 nets, routed with 554 tracks and 256 vias.
It is built around the ATMEGA32U4-AU, OPA2335 and AO4407A, with the AOSP36326C and SS14 among its other parts. Its parts include 40 resistors, 29 capacitors, 14 connectors, 4 switches and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
OPA2335
SOP-8Precision Op AmpsTokmasAO4407A
SOP-8-55℃~+150℃ 1 P-Channel 1.8V 14A 2.05nF 20nC@4.5V、40nC@10V 3.1W 300pF 30V 330pF 9.5mΩ@10V、14.7mΩ@4.5V SOP-8 MOSFETs ROHSUMWMOSFETs
AOSP36326C
SOIC-8-55℃~+150℃ 1 N-channel 1.8V 12A 2.5W 233pF 30V 31pF 542pF 9mΩ@10V 9nC@10V SOIC-8 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdSmartSoldering
SmartSoldering - Weller compatible soldering station
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 1k | Resistor_SMD:R_0603_1608Metric | R4a1, R4b1, R5a1, R5b1, R6b1, R7a1, R7b1, R8a1, R9a1, R13b1, R14b1, R15b1, R16b1, R18a1 |
| 13 | 10nF | Capacitor_SMD:C_0603_1608Metric | C1a1, C2a1, C2b1, C3a1, C3b1, C4a1, C5a1, C6a1, C6b1, C7a1, C7b1, C8a1, C11a1 |
| 11 | 10k | Resistor_SMD:R_0603_1608Metric | R1a1, R2a1, R3a1, R3c1, R6a1, R9b1, R11a1, R12a1, R13a1, R17a1, R18b1 |
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1c1, C4b1, C5c1, C6c1, C7c1, C8c1, C9c1 |
| 4 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4a1, J5a1, J7a1, J8a1 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric | R3b1, R4c1, R12b1 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2c1, C12a1, C13a1 |
| 3 | 2k4 | Resistor_SMD:R_0603_1608Metric | R1b1, R5c1, R10b1 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R8b1, R17b1 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R14a1, R16a1 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1b1, C5b1 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R1c1, R2c1 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C3c1, C4c1 |
| 2 | 330uF | Capacitor_SMD:CP_Elec_8x10.5 | C9a1, C14a1 |
| 2 | 56k | Resistor_SMD:R_0603_1608Metric | R2b1, R11b1 |
| 2 | AO4407A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | M1b1, M3b1 |
| 2 | AOSP36326C | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | M2b1, M4b1 |
| 2 | AudioJack3 | SWITCH:Audiojack_straight | J1b2, J2b2 |
| 2 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J1b1, J2b1 |
| 2 | SS14 | Diode_SMD:D_SMA | D1b1, D2b1 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2a1, SW3a1 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric | R10a1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1c1 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1c1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | P1a1 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x08_Female | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | P2c1 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U2a1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1c1 |
| 1 | Net-Tie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | OPA2335 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1b1 |
| 1 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1a1 |
| 1 | SW_SPDT | SWITCH:SW_Toggle_Blue_wSlots | SW4a1 |
| 1 | Screw_Terminal_01x02 | Connectors_Phoenix:PhoenixContact_MC-G_02x5.08mm_Angled | J1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | P1c1 |
More from ThomasVDD/SmartSoldering
1Similar boards
- 2 layers40.6 × 23 mm
- 2 layers103.3 × 39.9 mm
- 4 layers161 × 87 mm
MainPCB
rohit-env/minideck-pcb
so I went off and designed a whole cyberdeck pcb, it’s kinda sick, it's a full-on deck with ports, buttons, blinky stuff, and that clean hacker aesthetic.
194 parts - 2 layers100 × 120 mm
Dcc station
cc90202/DCC-esp32
DCC command station for ESP32-C6 — NMRA-compliant model railroad controller in Rust
82 parts12 - 2 layers90 × 60 mm
- 2 layers217.2 × 95.3 mm
- 2 layers99 × 99 mm
Quadcuber b1
gonewx/quadcuber
本目录是 A1 电子源目录。打开 quadcuber.kicadpro，包含原生可编辑原理图和四层 PCB、本地符号/封装库。本设计为单块PCB，RP2040、QSPI Flash、晶振、USB-C、驱动和电源均直接焊接在板上；A0的Pico H插装已移除。马达使用EV3裸插座。接线定义仍从 ../wiring/spec.py 导入，固件未改动，也没有把 R/L 固件描述成已支持四臂控制。
70 parts - 2 layers59.1 × 49.1 mm
Desktopia
Diabltica/Desktopia
Desktopia is an open-source project for easy height control of your IKEA Skarsta/Trotten sit-stand desk, providing a comfortable and customizable workspace experience
76 parts
Questions
How big is the SolderingRT1 PCB?
It measures 100 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SolderingRT1 use?
99 parts, built around the ATMEGA32U4-AU, OPA2335, AO4407A and AOSP36326C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SolderingRT1 KiCad files?
From the ThomasVDD/SmartSoldering repository on GitHub, at the commit this page was made from: the board is Kicad/SolderingRT1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SolderingRT1 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).