

Solar BQ25798
- Size
- 177 × 85 mm
- Copper layers
- 6
- Thickness
- 1.53 mm
- Parts
- 362
- Nets
- 249
- Pads
- 1,128
- Tracks, vias
- 4,460, 278
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 30 Jun 2025
- Updated
- 4 Nov 2026
Overview
Solar BQ25798 is an open-source printed circuit board by TheCacophonyProject, from the TheCacophonyProject/solar-battery repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 6-layer board of 177 × 85 mm with 362 parts on 249 nets, routed with 4,460 tracks and 278 vias.
It is built around the ATTINY1616-MN, BQ25798RQMR and M24C02-WMN6, with the DMP2035U-7(ES), MY-18650-04-J and MY-18650-05-J among its other parts. Its parts include 141 resistors, 55 capacitors, 52 transistors, 21 ICs and 7 diodes. It belongs with the power boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
9ATTINY1616-MN
QFN-20-EP(3x3)-40℃~+105℃ 1.8V~5.5V 10bit 16KB 18 20MHz 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH QFN-20-EP(3x3) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)BQ25798RQMR
QFN-29(4x4)-40℃~+85℃ 17uA 1~4 3.6V~24V 5A Charging IC I2C Lithium Battery Support QFN-29(4x4) Battery Management ROHSTexas InstrumentsBattery ManagementM24C02-WMN6
SO-8SO-8 EEPROM ROHSSTMicroelectronicsEEPROMDMP2035U-7(ES)
SOT-23SOT-23 MOSFETs ROHSElecSuperMOSFETsMY-18650-04-J
-18650 Battery spring contact Nickel plated Phosphor bronze - ROHSMYOUNGButton And Strip Battery ConnectorMY-18650-05-J
-18650 Battery spring contact Nickel plated Phosphor bronze - ROHSMYOUNGButton And Strip Battery ConnectorSMAJ20CA
DO-214AC(SMA)-55℃~+150℃ 12.3A@10/1000us 1uA 20V 24.5V 32.4V 400W@10/1000us Bidirectional IEC 61000-4-2 TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)CSD17578Q3A
VSONP-8(3.3x3.3)-55℃~+150℃ 1 N-channel 1.59nF 1.9V 134pF 22.2nC@10V 30V 37W 54A 73pF 9.4mΩ@4.5V N-Channel VSONP-8(3.3x3.3) MOSFETs ROHSTexas InstrumentsMOSFETsFUET-1230
SMD,12x12mm-20℃~+70℃ 12mm 12mm 1V~25V 3.3mm 3V 4kHz 5mA 75dB Passive (Externally Driven) Piezoelectric SMD,12x12mm Buzzers ROHSFUETBuzzers
README
solar-BQ25798/README.mdProcess for setting positions and duplicating layouts
python -m venv ./pi-venvsource pi-venv/bin/activatepip install kicad-pythonpython positioning.py- Running the python positioning script messes up the link of the component to the schematic so run "Update PCB from schematic" but check "re-link footprint to schematic bases on ref
- It also messes up the footprints a bit but this can be fixed by updating all footprints from library.
- Make the layout for one cell.
- Group the layout for one cell. This can sometimes be easier to do if you move everything to the side with shift+m.
- Replicate layout by
- Open up group of the cell
- Select the anker component (the one that gets placed though the positioning script)
- Go to Tools -> External plugins -> Replicate layout
- Don't replicate drawings (it will replicate the edge boarder for some reason)
- Select: Replicate group only (this makes sure you get all the tracks you want and nothing else)
- Select: Remove existing tracks/...
- Select: Remove Duplicates
Building manufacturing files
- Install https://gitlab.com/waltzingkea/kicad-tools
make-kicad-prod-files --config ./wk-kicad-tools.yaml --type fab-files --version <set-version>
Parts
362| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | 4.7M | Resistor_SMD:R_0402_1005Metric | R1001, R1005, R1006, R1101, R1105, R1106, R1201, R1205, R1206, R1301, R1305, R1306, R1401, R1405, R1406, R1501 +29 |
| 30 | MountingHole | cacophony-library:MountingHole_3.2mm_no_bolt_head | H101, H102, H105, H106, H107, H108, H109, H110, H111, H112, H113, H114, H115, H116, H117, H118 +14 |
| 20 | 100nF | Capacitor_SMD:C_0402_1005Metric | C121, C122, C201, C301, C401, C501, C1001, C1101, C1201, C1301, C1401, C1501, C1601, C1802, C1808, C1809 +4 |
| 19 | 100k | Resistor_SMD:R_0402_1005Metric | R101, R105, R106, R115, R202, R302, R402, R502, R602, R1002, R1102, R1202, R1302, R1402, R1502, R1602 +3 |
| 16 | 2.2k | Resistor_SMD:R_0402_1005Metric | R102, R207, R307, R407, R507, R607, R707, R807, R907, R1007, R1107, R1207, R1307, R1407, R1507, R1607 |
| 15 | 22mΩ | Resistor_SMD:R_0805_2012Metric | R204, R304, R404, R504, R604, R704, R804, R904, R1004, R1104, R1204, R1304, R1404, R1504, R1604 |
| 15 | 330Ω | Resistor_SMD:R_0402_1005Metric | R203, R303, R403, R503, R603, R703, R803, R903, R1003, R1103, R1203, R1303, R1403, R1503, R1603 |
| 15 | BQ297xy | cacophony-library:WSON-6_1.5x1.5mm_P0.5mm | U201, U301, U401, U501, U601, U701, U801, U901, U1001, U1101, U1201, U1301, U1401, U1501, U1601 |
| 15 | DMP2035U-7 | Package_TO_SOT_SMD:SOT-23 | Q201, Q301, Q401, Q501, Q601, Q701, Q801, Q901, Q1001, Q1101, Q1201, Q1301, Q1401, Q1501, Q1601 |
| 15 | FS8205A_C908265 | Package_TO_SOT_SMD:SOT-23-6 | Q203, Q303, Q403, Q503, Q603, Q703, Q803, Q903, Q1003, Q1103, Q1203, Q1303, Q1403, Q1503, Q1603 |
| 15 | MY-18650-04-J | cacophony-library:BAT-TH-18650-P_silkscreen | BAT_P101, BAT_P102, BAT_P103, BAT_P104, BAT_P105, BAT_P106, BAT_P107, BAT_P108, BAT_P109, BAT_P110, BAT_P111, BAT_P112, BAT_P113, BAT_P114, BAT_P115 |
| 15 | MY-18650-05-J | cacophony-library:BAT-TH-18650-N | BAT_N101, BAT_N102, BAT_N103, BAT_N104, BAT_N105, BAT_N106, BAT_N107, BAT_N108, BAT_N109, BAT_N110, BAT_N111, BAT_N112, BAT_N113, BAT_N114, BAT_N115 |
| 15 | Q_PMOS_GSD | cacophony-library:SOT-523 | Q202, Q302, Q402, Q502, Q602, Q702, Q802, Q902, Q1002, Q1102, Q1202, Q1302, Q1402, Q1502, Q1602 |
| 10 | 1uF | Capacitor_SMD:C_0402_1005Metric | C101, C102, C1801, C1803, C1804, C1805, C1806, C1807, C1811, C1902 |
| 9 | TestPoint | cacophony-library:TP_PAD_S | TP1701, TP1702, TP1902, TP1903, TP1904, TP1905, TP1906, TP1908, TP1909 |
| 7 | 100Ω | Resistor_SMD:R_1206_3216Metric | R1801, R1802, R1803, R1804, R1805, R1806, R1811 |
| 7 | 10uF 25V | Capacitor_SMD:C_0805_2012Metric | C1711, C1713, C1714, C1715, C1716, C1718, C1721 |
| 6 | 100Ω | Resistor_SMD:R_0402_1005Metric | R1704, R1807, R1809, R1903, R1907, R1908 |
| 6 | 1M | Resistor_SMD:R_0402_1005Metric | R5, R1810, R1812, R1813, R1814, R1815 |
| 5 | 10uF 50V | Capacitor_SMD:C_1206_3216Metric | C1703, C1704, C1720, C1722, C1723 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R1705 |
| 3 | 100nF 50V | Capacitor_SMD:C_0402_1005Metric | C1705, C1708, C1717 |
| 3 | 47nF | Capacitor_SMD:C_0402_1005Metric | C1706, C1707, C1710 |
| 3 | D | Diode_SMD:D_SOD-323_HandSoldering | D101, D102, D1801 |
| 3 | SMAJ20CA | Diode_SMD:D_SMA | D1, D2, D3 |
| 2 | 1nF 50V | Capacitor_SMD:C_0402_1005Metric | C1712, C1812 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q102, Q1901 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R6 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1709, C1810 |
| 2 | 470pF | Capacitor_SMD:C_0402_1005Metric | C1813, C1816 |
| 2 | 4A | cacophony-library:FUSE-SMD_2410F4A250V | F101, F102 |
| 2 | CSD17578Q3A | Package_SON:VSON-8_3.3x3.3mm_P0.65mm_NexFET | Q1801, Q1803 |
| 2 | Filter_EMI_LL_1423 | cacophony-library:FILTER-SMD_4P-L7.0-W6.0-TL_CYSCM7060FTL | FL101, FL102 |
| 2 | Power OUT | Connector_JST:JST_VH_B3P-VH-B_1x03_P3.96mm_Vertical | J102, J103 |
| 2 | Thermistor_NTC | cacophony-library:0603_NTC_CUTOUT | TH1701, TH1801 |
| 1 | 0Ω | cacophony-library:R_0805_0Ω_Short | R1902 |
| 1 | 10uH | Inductor_SMD:L_12x12mm_H8mm | L1701 |
| 1 | 13.7k | Resistor_SMD:R_0402_1005Metric | R1703 |
| 1 | 15mΩ | cacophony-library:R_1206_Shunt | R1808 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C1701 |
| 1 | 2.2Ω | Resistor_SMD:R_0805_2012Metric | R1701 |
| 1 | 30.9k ±0.1% | Resistor_SMD:R_0402_1005Metric | R1708 |
| 1 | 5.23k ±0.1% | Resistor_SMD:R_0402_1005Metric | R1707 |
| 1 | ATtiny1616-M | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U1902 |
| 1 | BQ25798RQMR | cacophony-library:QFN-29_L4.0-W4.0-P0.40-TL-BQ25792RQMR | U1701 |
| 1 | BQ76920PW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1801 |
| 1 | DMP4013LFGQ-13 | Package_SON:Diodes_PowerDI3333-8 | Q101 |
| 1 | D_Zener | Diode_SMD:D_SOD-123 | D103 |
| 1 | FST-1230 | cacophony-library:BUZ-SMD_L12.0-W12.0_FUET-1230 | BUZZER1 |
| 1 | HDC2080 | Sensor_Humidity:Texas_S-PWSON-N6-HDC2080 | U1 |
| 1 | HT75xx-1-SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U101 |
| 1 | M24C02-WMN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U106 |
| 1 | Power In | Connector_JST:JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | J101 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1802 |
| 1 | TC2030 | cacophony-library:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1901 |
| 1 | ~ | cacophony-library:KSD9700 | SW_T1 |
The 358 most common of 362 parts.
More from TheCacophonyProject/solar-battery
2- 2 layers35.6 × 82.3 mm

- 2 layers56 × 65 mm

Similar boards
- 6 layers73 × 75.5 mm

Tc2-main pcb
TheCacophonyProject/thermal-camera-v2
tc2-panel.py uses KiKit to build the manufacturing panel from the individual board files.
219 partsCERN-OHL-W-2.0 - 2 layers

Lightclock
Anvarys/lightclock
Light Clock A custom PCB-based Clock/Alarm with a runrise alarm, a circle of capacitive touch controls to easily choose the time and a 2.42" OLED display
202 parts - 2 layers106 × 148 mm

Chirstmas Card
emaneric/Electronic-Christmas-Card
A christmas card made from a PCB with a STM32, LED display, buttons, and buzzer.
86 partsMIT - 2 layers73.1 × 59.4 mm

Madpad
Madjogger1202/Madpad
Custom macropad based on RP2040 with display, audio feedback, and per-key RGB lighting.
138 parts - 2 layers47.2 × 45.8 mm

Heater controller rev a
manhoosbilli1/heater-controller-rev-a
Rev A of hierarchical heater controller (multi-sheet)
75 parts - 4 layers143.6 × 215.8 mm

Mcu and pi board
purduerov/X18-ROV-Test-Bench
This will be the place to push all test bench changes.
118 parts - 2 layers224 × 224 mm

- 4 layers65 × 56.5 mm

Escape
winson3QQ/Batman
Home project for Halow+openMANET on Pi4 & & Seeed WM1302 HAT & Wio-WM6108
175 parts
Questions
How big is the Solar BQ25798 PCB?
It measures 177 × 85 mm and has 6 copper layers, 1.53 mm thick.
What parts does the Solar BQ25798 use?
362 parts, built around the ATTINY1616-MN, BQ25798RQMR, M24C02-WMN6 and DMP2035U-7(ES). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solar BQ25798 KiCad files?
From the TheCacophonyProject/solar-battery repository on GitHub, at the commit this page was made from: the board is solar-BQ25798/solar-BQ25798.kicad_pcb and its schematic cell-protection/cell-protection.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solar BQ25798 design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).