
Train locs board
devramsean0/train-locs-board
A LED train location board, meant to show the trains on platform at any station

This is my practice with KiCad with an application that is useful to me, it acts as a secondary screen with the intent that it bypasses the need to check the score,health,and other info across the larger screen and puts it all into one clean interface.
KiCad project is an open-source printed circuit board by The144hz, from the The144hz/CS2-Stats-Secondary-HUD repository on GitHub. It is a 4-layer board of 162.2 × 163 mm with 19 parts on 86 nets, routed with 187 tracks and 12 vias.
It is built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3 and TXB0106PW. Its parts include 7 capacitors, 5 resistors, 4 ICs and 1 connector. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C7 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | EA_eDIPTFT57-A | Display:EA_eDIPTFT57-XXX | U3 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U4 |
| 1 | TXB0106PW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
The 17 most common of 19 parts.

devramsean0/train-locs-board
A LED train location board, meant to show the trains on platform at any station

FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board

peterisza/mobilecg
MobilECG II is an open source clinical grade Holter ECG. For more information, please visit http://mobilecg.hu.


ekatynski/WCS1700-Calibrator
A board designed to aid in calibrating six Winson WCS1700 hall effect sensors a the same time.



It measures 162.2 × 163 mm and has 4 copper layers, 1.6 mm thick.
19 parts, built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3 and TXB0106PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the The144hz/CS2-Stats-Secondary-HUD repository on GitHub, at the commit this page was made from: the board is KiCad project.kicad_pcb and its schematic KiCad project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask The144hz before reusing the design.