

LuminaREACT hat
LuminaREACT: A Sound-Controlled Animation Manager for WS2812 LEDs Powered by STM32F4
- Size
- 70 × 84 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 42
- Pads
- 262
- Tracks, vias
- 445, 138
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Sep 2024
- Updated
- 11 Sep 2024
Overview
LuminaREACT hat is an open-source printed circuit board by The-JC, from the The-JC/LuminaREACT-hardware repository on GitHub. It is a 2-layer board of 70 × 84 mm with 76 parts on 42 nets, routed with 445 tracks and 138 vias.
It is built around the SN74LVC1G17DBV, BAS70-04 and GMI6027P-2C30DB. Its parts include 30 resistors, 16 capacitors, 7 diodes, 5 connectors and 4 ICs. It belongs with the lEDs and displays and audio and music boards and the ESP8266 boards of this library.
Main components
3SN74LVC1G17DBV
SOT-23-5-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.6ns@3.3V,15pF 74LVC Power-off isolation、Level shifting Push-pull Schmitt trigger Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffer/Driver/TransceiverBAS70-04
SOT-23Schottky DiodeshongjiachengGMI6027P-2C30DB
插件,D=6mm-20℃~+60℃ -30dB 2.2kΩ 2.7mm 2V 500uA 58dB 6mm Omnidirectional Through-hole 插件,D=6mm Microphones ROHSINGHAiMicrophones
README
README.mdLuminaREACT - Hardware
This repository is the hardware documentation of the LuminaREACT project.
LuminaREACT is CORTEX-M4 based audio visualizer for LED strips using the WS2812 led chip. For further information visit: LuminaREACT Firmware
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100k | Resistor_SMD:R_0805_2012Metric | R6, R9, R10, R15, R16, R27, R28, R33, R34, R38, R39 |
| 9 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1, TP2, TP3, TP4, TP6, TP8, TP10, TP11, TP12 |
| 7 | 4k7 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R40, R41 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C17, C20, C22 |
| 4 | 5u6 | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C5, C11, C16 |
| 3 | 27p | Capacitor_SMD:C_0805_2012Metric | C4, C6, C7 |
| 3 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C13, C15, C19 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D3, D4, D5 |
| 2 | 470 | Resistor_SMD:R_0805_2012Metric | R31, R32 |
| 2 | 49.9 | Resistor_SMD:R_0805_2012Metric | R25, R37 |
| 2 | AudioJack2_Ground | Connector_Audio_hellner.cc:Jack_3.5mm_BOOMELE_PJ-320B-SMT_Horizontal | J1, J3 |
| 2 | BAS70-04 | Package_TO_SOT_SMD:SOT-23 | D6, D7 |
| 2 | Conn_02x19_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | CN1, CN2 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R35 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 27k | Resistor_SMD:R_0805_2012Metric | R36 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R42 |
| 1 | 40k2 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 5k9 | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | CAT5171 | Package_TO_SOT_SMD:SOT-23-8_Handsoldering | U3 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J4 |
| 1 | ESP-12F_THT | RF_Module:ESP-12E-THT | U1 |
| 1 | GMI6027P-2C30DB | Sensor_Audio_hellner.cc:MIC_6.0x2.7MM | MK1 |
| 1 | Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | NP | Resistor_SMD:R_0805_2012Metric | R23 |
| 1 | ORANGE | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SN74LVC1G17 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U6 |
| 1 | SW_Push | Button_Switch_SMD_hellner.cc.pretty:SW_SPST_1TS002 | SW1 |
| 1 | SW_SPDT | Button_Switch_SMD_hellner.cc.pretty:SW_SPDT_SK-3390 | SW2 |
| 1 | TLV9064x | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U2 |
Similar boards
- 2 layers100 × 80 mm

- 4 layers100 × 100 mm

- 2 layers20.3 × 104.3 mm

Expander just back
plinkysynth/plinky-expander
hardware design of a small expander for the plinky synth
62 parts19 - 4 layers101.6 × 111.5 mm

Daisyplusdac
lichen-community-systems/signaletic
A music signal processing library designed for embedded environments and Web Assembly, in C
117 parts9MIT - 4 layers

Service section controller
olin-electric-motorsports/MKV-Boards
Repository for all OEM MKV PCB Projects
226 parts3 - 2 layers74.6 × 94.5 mm

E1 power dist 2s
Telfair8632/sr71-600
Twin-engine 600 mm RC Blackbird: parametric FreeCAD CAD, a 14-level Pico 2 firmware verification ladder, and a complete QA-evidenced digital build package
41 parts2MIT - 4 layers23 × 37.7 mm

USB duck v2
Freimor/HRDW-Automaton_v2
A BadUsb with a few design additions for tech teams.
69 parts1MIT - 2 layers99.9 × 50 mm

Questions
How big is the LuminaREACT hat PCB?
It measures 70 × 84 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LuminaREACT hat use?
76 parts, built around the SN74LVC1G17DBV, BAS70-04 and GMI6027P-2C30DB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LuminaREACT hat KiCad files?
From the The-JC/LuminaREACT-hardware repository on GitHub, at the commit this page was made from: the board is LuminaREACT_hat/LuminaREACT_hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LuminaREACT hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask The-JC before reusing the design.