
Adjustable Load v1.1
kholia/Adjustable-Load-v1.1
Easy + Cost-Effective Variable Electronic Load.

Esp32 breakout board is an open-source printed circuit board by Tharindusb, from the Tharindusb/esp32_breakout_board repository on GitHub. It is a 2-layer board of 61.7 × 78.9 mm with 20 parts on 15 nets, routed with 136 tracks and 4 vias.
It is built around the IRFZ44NPBF. Its parts include 6 resistors, 4 ICs, 4 connectors and 2 capacitors. It belongs with the interfaces and adapters and microcontroller boards boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | IRFZ44NPBF | IRFZ44NPBF_footprint:TO-220 | U2, U3, U4 |
| 2 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | esp32 | ESP32-DEVKIT-V1_footprint:MODULE_ESP32_DEVKIT_V1 | U1 |

kholia/Adjustable-Load-v1.1
Easy + Cost-Effective Variable Electronic Load.

barrettotte/mech-mouse-jiggler
A very impractical and stupid mouse jiggler using a crank mechanism, 12V DC motor, and a PWM circuit.


almondsun/DynamicSystemsAndControl
Dynamic Systems and Control coursework: Buck converter modeling, reports, KiCad PCB and STM32 firmware

khalidislam377-gif/Bidirectional-H-bridge-motor-driver-with-MCU-and-controlling-buttons-and-knob
`An embedded control architecture and discrete power stage for bidirectional DC motor regulation, featuring finite-state machine logic, real-time telemetry, and a Rev 1.0 hardware post-mortem.`

KomplexKapharnaum/KXKM_Batterie_Parallelator
Battery Management Unit for parallel 24-30V packs Up to 32 batteries ESP32-S3 BLE + MQTT + InfluxDB iOS companion app


lwuu0052/ECSE-Projects
Collection of my Electrical & Computer Systems Engineering projects: FPGA/Verilog digital design, STM32 embedded systems, and visible light communication research.
It measures 61.7 × 78.9 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the IRFZ44NPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tharindusb/esp32_breakout_board repository on GitHub, at the commit this page was made from: the board is esp32_breakout_board.kicad_pcb and its schematic esp32_breakout_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Tharindusb before reusing the design.