
Teensy eurorack
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

MainPCB is an open-source printed circuit board by Team-Elite-2025, from the Team-Elite-2025/2025MainPCB repository on GitHub. It is a 4-layer board of 108 × 101 mm with 78 parts on 87 nets, routed with 1,033 tracks and 133 vias.
It is built around the TEENSY 4.1. Its parts include 20 resistors, 14 capacitors, 14 connectors, 12 ICs and 6 switches. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 6 | 10k | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R2, R3, R4, R5, R6, R18 |
| 5 | .1uf | Capacitor_SMD:C_0805_2012Metric | C2, C4, C5, C7, C9 |
| 5 | 10uf | Capacitor_SMD:C_0805_2012Metric | C1, C3, C6, C8, C10 |
| 4 | 0.1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12, C13, C14 |
| 4 | Motor_DC | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | M1, M2, M3, M4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H3, H5, H7, H8 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H4, H6 |
| 4 | SW_SPDT | SlideSW:SPDT_OS102011_CNK | SW2, SW3, SW4, SW5 |
| 4 | VNH7070ASTR | VNH:SOIC127P600X175-16N | IC1, IC2, IC3, IC4 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8, J9, J10 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J3, J4 |
| 2 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J13, J14 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7, J11 |
| 2 | N channel | Package_TO_SOT_THT:TO-220-3_Vertical | U6, U10 |
| 2 | SW_DPST_x2 | SlideSW:SPDT_OS102011_CNK | SW1, SW6 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 1 | 1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | BoostConverter | BoostConverter:Boost_Convertor_LM2577 | U3 |
| 1 | Compass | Custom:Compass Sensor DFRobot | U5 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J6 |
| 1 | RaspberryPi | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J2 |
| 1 | Screw_Terminal_01x02 | Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | J5 |
| 1 | Teensy4.1 | teensy:Teensy41 | U12 |
| 1 | V_Regulator3.3v | Custom:Pololu Regulator | U1 |
| 1 | V_Regulator5v | Custom:Pololu Regulator | U4 |
| 1 | V_Regulator5v | Custom:Pololu5V3.4A | U2 |

newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels





jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1

FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project

DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
It measures 108 × 101 mm and has 4 copper layers, 1.6 mm thick.
78 parts, built around the TEENSY 4.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Team-Elite-2025/2025MainPCB repository on GitHub, at the commit this page was made from: the board is MainPCB.kicad_pcb and its schematic MainPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Team-Elite-2025 before reusing the design.