Skip to the content
2 layers100 × 55 mmOszillatoren, the printed circuit board in 3D

Die Leiterplatte LA – Oszillatoren wurde für Laborübungen im Bereich Elektronik und Hardwareentwicklung entwickelt.

Size
100 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
32
Pads
144
Tracks, vias
220, 20
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Jun 2026
Updated
27 Aug 2026

Overview

Oszillatoren is an open-source printed circuit board by TIH-engineering, from the TIH-engineering/Oszillatoren repository on GitHub. It is a 2-layer board of 100 × 55 mm with 67 parts on 32 nets, routed with 220 tracks and 20 vias.

It is built around the LM358 and 74AHC1G4210GWH. Its parts include 21 resistors, 19 capacitors, 19 connectors, 4 ICs and 2 diodes.

Main components

2

README

README.md

Release Build License

LA – Oszillatoren

🔌 Leiterplattenbeschreibung

Die Leiterplatte LA – Oszillatoren wurde für Laborübungen im Bereich Elektronik und Hardwareentwicklung entwickelt. Sie ermöglicht die praktische Untersuchung unterschiedlicher Oszillatorschaltungen und den Vergleich ihrer Funktionsprinzipien und Eigenschaften.

Auf einer gemeinsamen Leiterplatte sind mehrere typische Oszillatorschaltungen realisiert:

  • RC-Phasenschieber-Oszillator
  • Wien-Brücken-Oszillator
  • OPV-Relaxationsoszillator
  • RC-/Quarzoszillatoren

Die Schaltungen sind räumlich voneinander getrennt aufgebaut und verfügen über gut zugängliche Messpunkte. Dadurch können charakteristische Signale direkt mit dem Oszilloskop untersucht und mit den theoretisch berechneten Größen verglichen werden.

Bei ausgewählten Schaltungen sind Bauteile steck- bzw. austauschbar ausgeführt. Damit können beispielsweise unterschiedliche Widerstandswerte eingesetzt und deren Einfluss auf Frequenz und Schwingverhalten experimentell untersucht werden.

Die Leiterplatte wird mit +5 V / GND / −5 V versorgt. Die einzelnen Messpunkte und Anschlüsse sind direkt auf der Leiterplatte beschriftet.

Einsatzgebiet: Laborunterricht zur Untersuchung von Oszillatoren, Schwingbedingungen, Frequenzbestimmung und dem Einfluss einzelner Bauteile.


📥 Downloads

DateiBeschreibung
📄 Schaltplan (PDF)schematic.pdf
🖨 Leiterplatte (PDF)pcb.pdf
🔩 Bohrplandrill.pdf
📋 Stückliste (Excel)bom.xlsx
🌐 Interactive BOMibom.html
📦 Fertigungsdatenkicad.zip
🧊 STEP-Modellpcb.step

🖥 Leiterplatte

Vorschau

OberseiteUnterseite

Oberseite

Unterseite


ℹ Projektinformationen

EigenschaftWert
ProjektLA – Oszillatoren
SoftwareKiCad 10
RepositoryTIH-engineering/Oszillatoren
LizenzCC BY-NC-SA 4.0

🚀 Releases

Jeder Release enthält automatisch:

  • Gerberdaten
  • Bohrdaten
  • Stückliste (Excel)
  • Interactive BOM
  • STEP-Modell
  • Schaltplan als PDF
  • Leiterplatte als PDF
  • 3D-Renderings

Die jeweils aktuelle Version befindet sich unter Releases.


👨‍🏫 Autor

HTL Rankweil
Labor Elektronik / Hardwareentwicklung

Parts

67
QtyValueFootprintReferences
19Conn_01x01_PinConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ1, J2, J3, J4, J5, J6, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19 +3
1210kTIH:R_axial_SMD-Adapter_P10.16mm_1mmR2, R3, R4, R5, R6, R7, R8, R9, R12, R13, R14, R15
81uCapacitor_SMD:C_1206_3216MetricC2, C8, C9, C10, C11, C12, C13, C19
71nFCapacitor_SMD:C_0805_2012MetricC1, C3, C4, C5, C6, C7, C14
210kResistor_SMD:R_0805_2012MetricR10, R11
210pCapacitor_SMD:C_0603_1608MetricC15, C16
21kResistor_SMD:R_1206_3216MetricR1, R19
222pCapacitor_SMD:C_0603_1608MetricC17, C18
2LEDLED_SMD:LED_1206_3216MetricD1, D3
2LM358Package_DIP:DIP-8_W7.62mmU3, U4
10Resistor_SMD:R_0805_2012MetricR21
110MResistor_SMD:R_0805_2012MetricR16
11MResistor_SMD:R_0805_2012MetricR18
1330Resistor_SMD:R_0805_2012MetricR20
140106Package_DIP:DIP-14_W7.62mmU2
1470kResistor_SMD:R_0805_2012MetricR17
174AHC1G4210Package_TO_SOT_SMD:SOT-353_SC-70-5U1
1CrystalCrystal:Crystal_SMD_EuroQuartz_MQ-4Pin_7.0x5.0mm_HandSolderingY2
1CrystalCrystal:Crystal_SMD_G8-2Pin_3.2x1.5mm_HandSolderingY1

Similar boards

  • 2 layers32 × 32 mmCandel24h v1, the printed circuit board in 3D

    Candel24h v1

    abitwitch/candle_24h

    15 parts
  • 4 layers75 × 100 mmFrequency counter, the printed circuit board in 3D

    Frequency counter

    vladaviedov/frequency-counter

    [CAD] Handheld RF frequency counter

    104 parts
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers68.8 × 53.6 mmZArduino, the printed circuit board in 3D

    ZArduino

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    46 parts269
  • 2 layers152 × 88 mmRFBitBangSMT, the printed circuit board in 3D

    RFBitBangSMT

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    271 parts222
  • 2 layers118 × 103.5 mmEV Charger2, the printed circuit board in 3D

    EV Charger2

    fotherja/EV_Charger

    Arduino Uno Code for EV Charger

    62 parts167MIT
  • 2 layers113 × 62.2 mmFullScope, the printed circuit board in 3D

    FullScope

    tvlad1234/pillScopePlus

    Oscilloscope based around the STM32F401 Black Pill and a color LCD screen

    15 parts165Apache-2.0
  • 2 layers75.2 × 61.1 mmHelios, the printed circuit board in 3D

    Helios

    Grix/helios_dac

    Helios Laser DAC

    102 parts132

Questions

How big is the Oszillatoren PCB?

It measures 100 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Oszillatoren use?

67 parts, built around the LM358 and 74AHC1G4210GWH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Oszillatoren KiCad files?

From the TIH-engineering/Oszillatoren repository on GitHub, at the commit this page was made from: the board is pcb/Oszillatoren.kicad_pcb and its schematic pcb/Oszillatoren.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Oszillatoren design in my own project?

Its repository states no licence, so its author keeps all rights: ask TIH-engineering before reusing the design.