Skip to the content
2 layers100 × 99.3 mmPocket roulette, the printed circuit board in 3D

It consists of a 555 that ticks very fast and triggers a 4017 which then triggers the leds one after another, once you let go of the button the 555 stops and the leds stop at wherever they're now.

Size
100 × 99.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
25
Pads
66
Tracks, vias
119, 1
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 Apr 2026
Updated
22 Apr 2026

Overview

Pocket roulette is an open-source printed circuit board by Sushi-Mampfer, from the Sushi-Mampfer/pocket_roulette repository on GitHub. It is a 2-layer board of 100 × 99.3 mm with 20 parts on 25 nets, routed with 119 tracks and 1 via.

It is built around the NE555P. Its parts include 10 diodes, 5 resistors, 2 ICs, 1 capacitor and 1 connector.

Main components

1

README

README.md

Pocket roulette

A small roulette/dice/rng. banner

It consists of a 555 that ticks very fast and triggers a 4017 which then triggers the leds one after another, once you let go of the button the 555 stops and the leds stop at wherever they're now. You might be able to time it to land in an area, but I'd be surprised if it was possible to consistently land on the same spot.

PCB

image

Schematic

image

Bom

ReferenceQtyValue
C2110u
D1-D1010LED
J11USB_A
R11477
R211k
R3,R42500
R5110k
SW11SW_Push
U11NE555P
U214017

Parts

20
QtyValueFootprintReferences
10LEDLED_THT:LED_D5.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10
210kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3, R4
110uCapacitor_THT:C_Disc_D8.0mm_W5.0mm_P5.00mmC2
11kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2
14017Package_DIP:DIP-16_W7.62mmU2
1477Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1500Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR5
1NE555PPackage_DIP:DIP-8_W7.62mmU1
1SW_PushButton_Switch_THT:SW_PUSH-12mmSW1
1USB_AConnector_USB:USB_A_Molex_67643_HorizontalJ1

Similar boards

  • 2 layers327.9 × 139 mmCoco2, the printed circuit board in 3D

    Coco2

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    147 parts446
  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT
  • 2 layers152.9 × 74.9 mmClock, the printed circuit board in 3D

    Clock

    erikvanzijst/clock

    24H digital quartz clock from scratch

    82 parts21
  • 2 layers88.9 × 50.8 mmSynthCard, the printed circuit board in 3D

    SynthCard

    benjiaomodular/SynthCard

    I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

    16 parts19MIT
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers145.3 × 129.9 mmC128Diag, the printed circuit board in 3D

    C128Diag

    hackup/C128Diag

    Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.

    61 parts16

Questions

How big is the Pocket roulette PCB?

It measures 100 × 99.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pocket roulette use?

20 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pocket roulette KiCad files?

From the Sushi-Mampfer/pocket_roulette repository on GitHub, at the commit this page was made from: the board is src/kicad/pocket_roulette.kicad_pcb and its schematic src/kicad/pocket_roulette.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pocket roulette design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sushi-Mampfer before reusing the design.