Skip to the content
2 layers55.6 × 153.4 mmKiCad 9 6502 ROR Test Board V2.0S, the printed circuit board in 3D

KiCad 9 6502 ROR Test Board V2.0S

Supercookiegaming/6502-ROR-Test-Board3

A board designed to test if a 6502 has an ROR instruction

Size
55.6 × 153.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
56
Pads
175
Tracks, vias
224, 4
Pours
156
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Dec 2023
Updated
9 Aug 2025

Overview

KiCad 9 6502 ROR Test Board V2.0S is an open-source printed circuit board by Supercookiegaming, from the Supercookiegaming/6502-ROR-Test-Board repository on GitHub. It is a 2-layer board of 55.6 × 153.4 mm with 28 parts on 56 nets, routed with 224 tracks and 4 vias.

It is built around the SN74HCT14DR(LX) and MAX7375AXR105+T. Its parts include 8 ICs, 7 resistors, 6 capacitors, 2 diodes and 2 transistors. It belongs with the retro computing and games boards of this library.

Main components

2

README

README.md

6502-ROR-Test-Board

The 6502 ROR Test Board is a simple computer that tests if the ROR insruction is present on the 6502. I/O space is from 0x0000 to 0x7FFF. Rom space starts at 0x8000 and ends at 0xFFFF. The LED is tied to bit 7 and is set when the CPU R/W is low (writing). The data is then latched into the D-Latch and will be held until updated. The Yes ROR LED is turned on when the cpu writes to any memeory in the I/O space and bit 7 is high, all other bits do nothing. The No ROR LED is turned on whent he cpu writes to any memeory in the I/O space and bit 7 is low.

I used https://www.masswerk.at/6502/assembler.html to assemble the rom code and create a BIN file. When using https://www.masswerk.at/6502/# to emulate the board, use the code marked as "Emulator". When the ROR bug is enabled 0x0010 will be 00 and when it is disabled 0x0010 will be 80.

When Building your own board its best to use sockets.

V2.0S uses mostly SMD parts (mostly 0603). V2.0T only has through hole components.

EasyEDA and KiCad 9 files are now available for both boards.

The design is free for personally use only.

V2.0S and V2.0T both now support zif sockets for the 6502 and AT28C256, the imporved reset circuit design, ground M3 mounting points, and better silkscreen instructions and pinouts.

Parts

28
QtyValueFootprintReferences
60.1uEasyEDA 6502 ROR Test Board V2.0S:C0603C1, C2, C3, C4, C5, C6
42.2kEasyEDA 6502 ROR Test Board V2.0S:R0603R1, R2, R3, R4
4Plated Through Hole M3EasyEDA 6502 ROR Test Board V2.0S:PLATED THROUGH HOLE M3U5, U6, U7, U8
3150EasyEDA 6502 ROR Test Board V2.0S:R0603R5, R6, R7
22N7002EasyEDA 6502 ROR Test Board V2.0S:SOT-23_L2.9-W1.3-P0.95-LS2.4-BRQ1, Q2
2LED-0603_REasyEDA 6502 ROR Test Board V2.0S:LED0603_REDLED1, LED2
16502EasyEDA 6502 ROR Test Board V2.0S:40 PIN ZIF SOCKET WITH ROOM FOR PART NUMBERU1
1AT28C256EasyEDA 6502 ROR Test Board V2.0S:28 PIN ZIF SOCKET WITH ROOM FOR PART NUMBERU2
1CONN-TH_2P-P5.00EasyEDA 6502 ROR Test Board V2.0S:CONN-TH_2P-P5.00P1
1K2-3.6×6.1_SMDEasyEDA 6502 ROR Test Board V2.0S:KEY-SMD_2P-L6.2-W3.6-LS8.0RESET
1MAX7375AXR105+TEasyEDA 6502 ROR Test Board V2.0S:SC70-3OSC1
1SN74HCS74DREasyEDA 6502 ROR Test Board V2.0S:SOIC-14_L8.6-W3.9-P1.27-LS6.0-BLU4
1SN74HCT14DREasyEDA 6502 ROR Test Board V2.0S:SOIC-14_L8.7-W3.9-P1.27-LS6.0-BLU3

More from Supercookiegaming/6502-ROR-Test-Board

1

Similar boards

  • 6 layers84 × 98 mmFujiNet-5200-Rev0, the printed circuit board in 3D

    FujiNet-5200-Rev0

    FujiNetWIFI/fujinet-hardware

    Schematics and design files for FujiNet hardware

    145 parts142
  • 2 layers105.5 × 81.1 mmBuck, the printed circuit board in 3D

    Buck

    almondsun/DynamicSystemsAndControl

    Dynamic Systems and Control coursework: Buck converter modeling, reports, KiCad PCB and STM32 firmware

    77 parts
  • 2 layers44.5 × 72.7 mmOSO SWAT C1-jig, the printed circuit board in 3D

    OSO SWAT C1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    28 parts2.1k
  • 2 layers95 × 54 mmEinkPDA screen, the printed circuit board in 3D

    EinkPDA screen

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    28 parts2kApache-2.0
  • 2 layers45 × 45 mmSmartbuttons, the printed circuit board in 3D

    Smartbuttons

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    28 parts915
  • 2 layers24.1 × 36.2 mmEsp32miniBT, the printed circuit board in 3D

    Esp32miniBT

    asterics/esp32_mouse_keyboard

    ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)

    28 parts911GPL-3.0

Questions

How big is the KiCad 9 6502 ROR Test Board V2.0S PCB?

It measures 55.6 × 153.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KiCad 9 6502 ROR Test Board V2.0S use?

28 parts, built around the SN74HCT14DR(LX) and MAX7375AXR105+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KiCad 9 6502 ROR Test Board V2.0S KiCad files?

From the Supercookiegaming/6502-ROR-Test-Board repository on GitHub, at the commit this page was made from: the board is EDA Files/KiCad 9 6502 ROR Test Board V2.0S/KiCad 9 6502 ROR Test Board V2.0S.kicad_pcb and its schematic EDA Files/KiCad 9 6502 ROR Test Board V2.0S/KiCad 9 6502 ROR Test Board V2.0S.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the KiCad 9 6502 ROR Test Board V2.0S design in my own project?

Its repository states no licence, so its author keeps all rights: ask Supercookiegaming before reusing the design.