Skip to the content
2 layers27.3 × 30.2 mmServoTester, the printed circuit board in 3D

PCB design for Servo Tester

Size
27.3 × 30.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
8
Pads
28
Tracks, vias
61, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 May 2026
Updated
17 May 2026

Overview

ServoTester is an open-source printed circuit board by Suman-Gayen, from the Suman-Gayen/ServoTester repository on GitHub. It is a 2-layer board of 27.3 × 30.2 mm with 12 parts on 8 nets, routed with 61 tracks and 0 vias.

It is built around the NE555P. Its parts include 3 resistors, 2 diodes, 2 connectors, 1 capacitor and 1 IC. It belongs with the robots and motor control boards of this library.

Main components

1

README

README.md

🔧 Servo Tester PCB Design

A simple and compact Servo Tester Circuit designed using KiCad EDA 9.0.2 for generating PWM signals to test and control standard servo motors.


📌 Project Overview

This project uses the NE555 Timer IC to generate PWM (Pulse Width Modulation) signals required for controlling servo motor position.

By adjusting the potentiometer, the pulse width changes, allowing smooth servo movement and position testing.


🖼 Project Schematic

md
![Servo Tester Schematic](images/schematic.png)

⚙ Features

  • Servo motor testing
  • PWM signal generation
  • Adjustable servo position control
  • Compact PCB design
  • LED power indication
  • Simple and beginner-friendly circuit

🛠 Software Used

ToolVersion
KiCad EDA9.0.2

🔩 Components Used

ComponentValue / Part
U1NE555 Timer IC
D11N4148 Diode
D2LED
C122nF Capacitor
R11KΩ Resistor
R23M3Ω Resistor
R356KΩ Resistor
RV1100K Potentiometer
J1DC Input Connector
J2Servo Motor Connector

🔍 Working Principle

1. PWM Signal Generation

The NE555 timer IC generates PWM pulses required for servo motor operation.

2. Pulse Width Adjustment

The potentiometer changes the pulse width, which controls the servo angle.

3. Servo Control

The generated PWM signal is sent to the servo motor through the signal pin.

4. Power Indication

An LED indicator shows the power status of the circuit.


📐 PCB Design Highlights

  • Compact schematic structure
  • Beginner-friendly design
  • Proper component organization
  • Easy PCB routing
  • Suitable for learning embedded hardware concepts

🎯 Learning Outcomes

Through this project, I learned:

  • PWM signal generation
  • Servo motor interfacing
  • NE555 timer configuration
  • PCB schematic design in KiCad
  • Electronic timing circuit fundamentals

🚀 Future Improvements

  • Add frequency adjustment feature
  • Add OLED display for pulse width monitoring
  • Add multiple servo output ports
  • Design compact single-layer PCB
  • Add onboard power regulation

📂 Project Structure

bash
Servo-Tester/
│
├── Servo Tester.kicad_sch
├── Servo Tester.kicad_pcb
├── Gerber_Files/
├── Images/
├── BOM/
└── README.md

📸 Recommended Images for Repository

Add these images inside the images/ folder:

  • Schematic Screenshot
  • PCB Layout
  • 3D PCB View
  • Final PCB
  • Servo Testing Setup

🧠 Skills Demonstrated

  • PCB Design
  • PWM Control
  • Servo Interfacing
  • KiCad EDA
  • Embedded Electronics
  • Hardware Development

👨‍💻 Author

Suman
Electronics & PCB Design Enthusiast


📜 License

This project is open-source and intended for educational and learning purposes.

Parts

12
QtyValueFootprintReferences
11KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
122nFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1
13M3Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
156KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ1
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ2
1LEDLED_THT:LED_D3.0mmD2
1NE555PPackage_DIP:DIP-8_W7.62mmU1
1R_PotentiometerPotentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal100K

The 10 most common of 12 parts.

Similar boards

  • 2 layers327.9 × 139 mmCoco2, the printed circuit board in 3D

    Coco2

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    147 parts446
  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT
  • 2 layers152.9 × 74.9 mmClock, the printed circuit board in 3D

    Clock

    erikvanzijst/clock

    24H digital quartz clock from scratch

    82 parts21
  • 2 layers88.9 × 50.8 mmSynthCard, the printed circuit board in 3D

    SynthCard

    benjiaomodular/SynthCard

    I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

    16 parts19MIT
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers145.3 × 129.9 mmC128Diag, the printed circuit board in 3D

    C128Diag

    hackup/C128Diag

    Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.

    61 parts16

Questions

How big is the ServoTester PCB?

It measures 27.3 × 30.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ServoTester use?

12 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ServoTester KiCad files?

From the Suman-Gayen/ServoTester repository on GitHub, at the commit this page was made from: the board is Servo Tester.kicad_pcb and its schematic Servo Tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ServoTester design in my own project?

Its repository states no licence, so its author keeps all rights: ask Suman-Gayen before reusing the design.