

Project rev5
- Size
- 86 × 93 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 87
- Pads
- 311
- Tracks, vias
- 530, 148
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Oct 2024
- Updated
- 12 Dec 2024
Overview
Project rev5 is an open-source printed circuit board by Stoozle, from the Stoozle/flops-repo repository on GitHub, published under the MIT licence. It is a 2-layer board of 86 × 93 mm with 86 parts on 87 nets, routed with 530 tracks and 148 vias.
It is built around the ESP32-S3-WROOM-1-N16R8, HX711 and MCP6004-E/P, with the 74LS21PC, 150060BS75000 and ESD9B5.0ST5G among its other parts. Its parts include 22 resistors, 18 capacitors, 11 connectors, 8 diodes and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
11ESP32-S3-WROOM-1-N16R8
SMD,25.5x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesHX711
SOP-16-40℃~+85℃ 1.4mA 10Hz、80Hz 1MHz~20MHz、11.0592MHz 2 2.6V~5.5V 20mV、40mV、80mV 24 Built-in External、Built-in SPI Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSAvia SemiconAnalog To Digital Converters (ADC)MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier74LS21PC
DIP-140℃~+70℃ 18ns@5V,50pF 2 2.7V~3.4V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA AND Gate DIP-14 Logic Gates ROHSonsemiLogic Gates150060BS75000
0603-40℃~+85℃ 1.1mm x 0.8mm square LED 1000V 105mW 140° 145mcd 20mA 25nm 3.2V 465nm 470nm Blue Discrete Diode InGaN Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)ESD9B5.0ST5G
SOD-923(0402)-55℃~+125℃ 1 10V 15pF 5V 8.4V 80W@8/20us 80nA 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOD-923(0402) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)150060RS75000
0603-40℃~+85℃ 140° 20mA 250mcd 2V 625nm 630nm Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes IncorporatedBSS816NWH6327XTSA1-HXY
SOT-323-55℃~+150℃ 1 N-channel 1V 20V 2A 300mW 85mΩ@2.5V N-Channel SOT-323 MOSFETs ROHSHXY MOSFETMOSFETsJS102011SAQN
SMD-40℃~+85℃ 3.5mm 300mA 5,000 cycles 6V 9mm Black Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD Slide Switches ROHSC&KSlide SwitchesS8550
SOT-23-55℃~+150℃ 1 PNP 100nA 120 150MHz 25V 300mW 500mA 5V 600mV PNP SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdFLOPS (FeLine Obesity Prevention System)
High level description (project in development and much is subject to change and refinement)
- Cat owner's may want to monitor their cat's weight for various reasons. This project is intended to provide a system that will automatically measures a cat's weight. Measurement data can be used to inform appropriate modifications to a cat's diet in order to meet a target weight.
Theory of operation
- Takes a cat's weight measurement every time it sleeps in its bed
- Allows user to observe plot of weight measurements over time
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C6, C8, C10, C11, C14, C16, C18 |
| 7 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11, R12, R16, R17, R22 |
| 7 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C7, C9, C13, C15, C17 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R13, R14, R15, R19, R20 |
| 5 | Conn_01x02 | Connector_JST:JST_XA_S02B-XASK-1N-BN_1x02_P2.50mm_Horizontal | J3, J4, J5, J6, J7 |
| 5 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP_ADC2, TP_AND1, TP_BOOT1, TP_LCELL_VCC1, TP_PU_EN1 |
| 4 | 100k Trim Pot | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1, RV2, RV3, RV4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R6, R7 |
| 3 | 150060BS75000 | LED_SMD:LED_0603_1608Metric | D5, D6, D8 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R8, R18 |
| 3 | ESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D2, D3, D4 |
| 2 | 8.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R21 |
| 2 | AZ1117CH-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3, U6 |
| 2 | PTS810 SJM 250 SMTR LFS | PTS810SJM250SMTR LFS:PTS810_CNK | SW2, SW3 |
| 2 | TestPoint | TestPoint:TestPoint_Keystone_5015_Micro-Minature | TP1, TP2 |
| 1 | 150060RS75000 | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | 1N5819-HW-7-F | Diode_SMD:D_SOD-123 | D1 |
| 1 | 1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 74LS21 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | BSS816NWH6327XTSA1 | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Kycon_KLDX-0202-xC_Horizontal | J1 |
| 1 | Conn_01x04 | Connector_JST:JST_XA_S04B-XASK-1N-BN_1x04_P2.50mm_Horizontal | J2 |
| 1 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J10 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J11 |
| 1 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J12 |
| 1 | ESP32-S3-WROOM-1-N16R8 | PCM_Espressif:ESP32-S3-WROOM-1 | U5 |
| 1 | HX711 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | JS102011SAQN | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SW4 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP6004 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | S8550 | Package_TO_SOT_SMD:SOT-23-3 | Q2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J8 |
More from Stoozle/flops-repo
2- 2 layers86 × 109 mm

- 2 layers86 × 109 mm

Similar boards
- 6 layers82 × 155 mm

- 2 layers93.8 × 73.5 mm

SimplerFlightV2
elenajusto/SimplerFlightV2
PCB for team rocket air brakes. (Never manufactured).
114 parts - 4 layers64.5 × 68.3 mm

- 4 layers80 × 80.1 mm

Chassis
ut-ras/robomaster_hardware
Welcome! Please read the Wiki page for information on how to set up your computer and an overview of the projects in this repository.
75 parts3 - 2 layers70 × 55 mm

- 4 layers210 × 100 mm

02 Power Board
ad4363/LuX-ray-PCBs
A repository containing KiCad schematic and pcb files for a wireless radiation detector testing interface
115 parts1 - 4 layers

RoboRyo
KaitoTLex/RoboRyo
This is team1280's replacement for the Robo Rio for more redundant and less annoying controls.
68 parts1MIT - 4 layers86.3 × 25 mm

Questions
How big is the Project rev5 PCB?
It measures 86 × 93 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Project rev5 use?
86 parts, built around the ESP32-S3-WROOM-1-N16R8, HX711, MCP6004-E/P and 74LS21PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Project rev5 KiCad files?
From the Stoozle/flops-repo repository on GitHub, at the commit this page was made from: the board is project_files/rev5/project_rev5/project_rev5.kicad_pcb and its schematic project_files/rev3/project_rev3/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Project rev5 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).