
SimonShield
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

Countdown timer with LED display drive by TM1637 and Arduino Nano.
Timer LED TM1637 Arduino is an open-source printed circuit board by StoicaT, from the StoicaT/Timer-with-TM1637-and-Arduino repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 91 × 89 mm with 19 parts on 42 nets, routed with 212 tracks and 14 vias.
It is built around the BC547. Its parts include 4 resistors, 3 diodes, 3 switches, 2 ICs and 2 transistors. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Countdown timer with LED display drive by TM1637 and Arduino Nano.
This countdown timer allows timings in the 1-9999 seconds range. It is built around an Arduino Nano and timer programming is done with a rotary encoder. The display of the duration of the delay and the remaining time is made with LED display module with TM1637.This display is more visible than others I have previously presented, because the numbers are bigger and brighter.
Programming: Set number seconds (rotary encoder) -> push -> secondsX10 -> push -> 100Xseconds -> push -> 1000Xseconds. Now the time is set. The next push will trigger the delay.
During the time delay the load will be powered through the Rel relay. If the MEM button is pressed, no further programming is required, the previous value is retained. More to: https://www.instructables.com/Timer-With-TM1637-and-Arduino/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 15K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 1 | +12V | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | 10uF/6V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 1K2/.25W | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Buzzer 5V | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | LED Memory | LED_THT:LED_D5.0mm | D3 |
| 1 | LED Power | LED_THT:LED_D5.0mm | D1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U1 |
| 1 | Out Relay NO | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | J2 |
| 1 | PUSHbutmic | Button_Switch_THT:SWlinmic | SW2 |
| 1 | Relay 12V | Relay_THT:Relay_SPDT_Omron-G5LE-1 | K1 |
| 1 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | TM1637module | Module:TM1637 module | U2 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!



ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

It measures 91 × 89 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the StoicaT/Timer-with-TM1637-and-Arduino repository on GitHub, at the commit this page was made from: the board is Timer LED TM1637 Arduino.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).