
Lps power-2
SteveMayze/lps-power-2
An experimental project to implement the reference design of the LMR33610ADDAR

An experimental project to implement the reference design of the LMR33610ADDAR
Lps power-2 is an open-source printed circuit board by SteveMayze, from the SteveMayze/lps-power-2 repository on GitHub. It is a 4-layer board of 56.7 × 47.3 mm with 34 parts on 10 nets, routed with 43 tracks and 27 vias.
Its parts include 7 capacitors, 5 connectors, 3 resistors, 1 IC and 1 inductor.
This is an experiment to investigate the use and suitability of the LMR33610ADDAR for use in the Power Sensor project with the goal to reduce the quiescent current.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 2 | 100.0 kΩ | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 100.0 nF | Capacitor_SMD:C_0805_2012Metric | C4, C7 |
| 2 | Vout | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J3, J3 |
| 1 | 1.0 μF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 12Vin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | 12Vin | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | 15 pF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 15.0 μH | Inductor_SMD:L_Bourns_SRR1260 | L1 |
| 1 | 220.0 nF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 4.7 μF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 43.2 kΩ | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 47.0 μF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | EN | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | EN | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | FB | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | GND | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J4 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | KiCad Logo | Symbol:KiCad-Logo2_5mm_SilkScreen | Lg2 |
| 1 | LMR33610ADDAR | Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U1 |
| 1 | PG | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | Polyfuse | lps-power-2:FUSE_F050-2 | F1 |
| 1 | SJM Logo | sjm-mech:MyBasic_rounded_50_1 | Lg1 |
| 1 | SW | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | Vcc | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | Vin | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | Vout | TestPoint:TestPoint_Pad_D1.0mm | TP8 |

SteveMayze/lps-power-2
An experimental project to implement the reference design of the LMR33610ADDAR


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)



lucanastasio/PCIexpress-KiCad
PCI express libraries and templates for KiCad



It measures 56.7 × 47.3 mm and has 4 copper layers, 1.58 mm thick.
34 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SteveMayze/lps-power-2 repository on GitHub, at the commit this page was made from: the board is kicad/lps-power-4-layer/lps-power-2.kicad_pcb and its schematic kicad/lps-power-2-layer/lps-power-2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SteveMayze before reusing the design.