4 layers38 × 61 mm
LandShark ADC Bridge
SteveLRojas/LandShark
FPGA board for motor control applications. Compatible with the Alchemy board.
33 partsCERN-OHL-P-2.0
4 layers85 × 85 mm
LandShark
SteveLRojas/LandSharkFPGA board for motor control applications. Compatible with the Alchemy board.
- Size
- 85 × 85 mm
- Copper layers
- 4
- Thickness
- 1.75 mm
- Parts
- 123
- Nets
- 139
- Pads
- 543
- Tracks, vias
- 1,181, 175
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Jun 2025
- Updated
- 20 Jul 2026
Overview
LandShark is an open-source printed circuit board by SteveLRojas, from the SteveLRojas/LandShark repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 85 × 85 mm with 123 parts on 139 nets, routed with 1,181 tracks and 175 vias.
It is built around the EP4CE15E22C8N, 74LVC1G17Z and W25Q16JVSNIQ, with the AMS1117-2.5, AMS1117CD-3.3 and FJ2481BH among its other parts. Its parts include 43 capacitors, 33 resistors, 12 ICs, 7 connectors and 4 transistors. It belongs with the FPGA and CPLD boards of this library.
Main components
7
EP4CE15E22C8N
EQFP-144(20x20)0℃~+85℃ 1.15V~1.25V 15408 516096bit 81 963 Cyclone IV E Supports hot swap、Supports SEU error detection and correction PQFP-144-EP(20x20) Programmable Logic Device (CPLDs/FPGAs) ROHSIntel/AlteraCPLD/FPGA
74LVC1G17Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.4ns@5V,15pF 74LVC Push-pull Schmitt trigger Unidirectional SOT-553 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers
W25Q16JVSNIQ
SOIC-8-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 133MHz 16Mbit 2.7V~3.6V 20 Years 400us SPI SOIC-8 NOR FLASH ROHSWinbond ElecNOR FLASH
AMS1117-2.5
SOT-223-40℃~+125℃ 0.003%Vout 1 1.3V@(1A) 18V 1A 2.5V 5mA 60dB@(120Hz) Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AMS1117CD-3.3
TO-252-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
FJ2481BH
插件0.28 10.2mm 32.2mm 4 5.8mm 7 Segment Common Anode Red 插件 LED Segment Displays ROHS志浩LED Segment Displays
MMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
README
README.mdLandShark
FPGA board for motor control applications. Compatible with the Alchemy board.
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26 +17 |
| 10 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11 |
| 8 | 220 | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18, R19, R20, R21, R22 |
| 8 | 5K6 | Resistor_SMD:R_0805_2012Metric | R13, R14, R27, R28, R29, R30, R31, R32 |
| 6 | 74LVC1G17 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5, U6, U7, U8, U9, U10 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP5, TP6, TP7, TP8, TP9, TP10 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R23, R24, R25, R26 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C5, C6, C11, C12 |
| 4 | L | Inductor_SMD:L_0805_2012Metric | L1, L2, L3, L4 |
| 4 | LL3301NF065QG | SamacSys_Parts:LL3301NF065QG | S1, S2, S3, S4 |
| 4 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP1, TP2, TP3, TP4 |
| 2 | 100u | Capacitor_SMD:CP_Elec_6.3x5.2 | C3, C7 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C4, C10 |
| 2 | 33 | Resistor_SMD:R_0805_2012Metric | R1, R33 |
| 2 | 47u | Capacitor_SMD:C_1206_3216Metric | C8, C9 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6, J7 |
| 2 | XO32 | Oscillator:Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm | X1, X2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | AMS1117-2.5 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AMS1117CD-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | AS | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | AZ1117-1.2 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Horizontal | J2 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Horizontal | J1 |
| 1 | EP4CE15E22C8N | SamacSys_Parts:QFP50P2200X2200X165-145N | IC1 |
| 1 | FJ2481BH | Signetics:FJ2481BH | U4 |
| 1 | JTAG | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J4 |
| 1 | PMOD | pmod-conn_6x2:pmod_socket_6x2 | J5 |
| 1 | W25Q16JVSNIQ | SamacSys_Parts:SOIC127P600X175-8N | IC2 |
More from SteveLRojas/LandShark
1Similar boards
- 2 layers191.3 × 164 mm
XYmatics E64
XyrusB2010/XYmatics-E64
A 5-axis Klipper mainboard, powered by a Raspberry Pi Compute Module and STM32F407
282 parts - 2 layers101.6 × 147.3 mm
Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT - 2 layers100 × 100 mm
- 4 layers120 × 92 mm
Kehvm
knewter/kvm-board
An open-source KVM-over-IP device built with a Milk-V Duo S (RISC-V) and ESP32-S3. Remotely control any computer's keyboard, video, and mouse over your network — at the hardware level, independent of the target's OS.
70 parts2 - 2 layers71.9 × 100 mm
Vco
cookiemonsternz/Eurorack-VCO
Also, a lot of eurorack modules are quite bland in terms of design, often lacking any personality and focusing purely on cramming as many knobs in as possible.
115 parts - 2 layers54.1 × 23.5 mm
- 6 layers132.1 × 107.9 mm
Zx50 MemoryCard RevC1
mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.
235 parts - 4 layers52 × 72 mm
Questions
How big is the LandShark PCB?
It measures 85 × 85 mm and has 4 copper layers, 1.75 mm thick.
What parts does the LandShark use?
123 parts, built around the EP4CE15E22C8N, 74LVC1G17Z, W25Q16JVSNIQ and AMS1117-2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LandShark KiCad files?
From the SteveLRojas/LandShark repository on GitHub, at the commit this page was made from: the board is LandShark/LandShark.kicad_pcb and its schematic LandShark/LandShark.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LandShark design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).