
RP2350 V2
Stefan1623/VoidLink_Hardware
Four-layer RF PCB design files for a wireless communication system

Four-layer RF PCB design files for a wireless communication system
RP2350 V2 is an open-source printed circuit board by Stefan1623, from the Stefan1623/VoidLink_Hardware repository on GitHub. It is a 4-layer board of 68.9 × 112.1 mm with 151 parts on 116 nets, routed with 1,133 tracks and 754 vias.
It is built around the TPS62811QWRWYRQ1, W25Q128JVSIQ and DMP1045U-7(ES), with the 74HC14, S0991-46R and SMF12CA among its other parts. Its parts include 48 capacitors, 40 resistors, 14 ICs, 10 connectors and 8 switches. It belongs with the radio and wireless boards and the RP2350 boards of this library.
VoidLink feautures a 4-layer PCB that integrates the RP2350 MCU with the SX1262 transceiver. It also contains custom power circuitry that uses USB or battery power with battery charging and under voltage protection.
Version Notes:
V1 only integrates the MCU and must interface with an external transceiver through the provided pinout.
V2 fully integrates both the MCU and the transceiver.| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R12, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27 |
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C5, C6, C7, C8, C9, C10, C11, C14, C16, C47 |
| 8 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C21, C22, C23, C24, C25, C26, C27, C32 |
| 8 | PTS 647 SN50 SMTR2 LFS | My_Footprints:PTS 647 SN50 SMTR2 LFS | SW1, SW4, SW9, SW10, SW11, SW12, SW13, SW14 |
| 6 | DMP1045U-7 | My_Footprints:SOT96P240X110-3N | IC1, IC2, IC3, IC4, IC5, IC6 |
| 5 | 100k | Resistor_SMD:R_0402_1005Metric | R3, R13, R34, R37, R39 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R9, R40, R41 |
| 5 | LOGO | LOGO | G***, G***, G***, G***, G*** |
| 4 | , , , | ||
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 4 | S0991-46R | My_Footprints:HARWIN_S0991-46R | J2, J8, J9, J10 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C19, C30, C31 |
| 2 | 1.8p | Capacitor_SMD:C_0402_1005Metric | C52, C58 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R35, R36 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 1n | Capacitor_SMD:C_0402_1005Metric | C59, C60 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 3.3p | Capacitor_SMD:C_0402_1005Metric | C62, C63 |
| 2 | 39p | Capacitor_SMD:C_0402_1005Metric | C57, C61 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C4, C15 |
| 2 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C17, C18 |
| 2 | 4.7u | My_Footprints:C_0402_1005Metric_small_pads | C2, C3 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R14, R15 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J7 |
| 2 | SMF12CA | My_Footprints:SMFSeries_SOD-123F | CR1, CR2 |
| 1 | 1.5Meg | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C28 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C29 |
| 1 | 110 | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 15n | Inductor_SMD:L_0402_1005Metric | L12 |
| 1 | 15u | Inductor_SMD:L_0805_2012Metric | L9 |
| 1 | 19.6k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 1Meg | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C48 |
| 1 | 2.4p | Capacitor_SMD:C_0402_1005Metric | C54 |
| 1 | 2.5n | Inductor_SMD:L_0402_1005Metric | L13 |
| 1 | 20 | Resistor_SMD:R_0402_1005Metric | R33 |
| 1 | 3.3u | My_Footprints:AOTA-B201610S3R3-101-T | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 3p | Capacitor_SMD:C_0402_1005Metric | C53 |
| 1 | 4.7n | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 4.7n | Inductor_SMD:L_0402_1005Metric | L14 |
| 1 | 470n | Capacitor_SMD:C_0402_1005Metric | C44 |
| 1 | 47n | Capacitor_SMD:C_0402_1005Metric | C49 |
| 1 | 47n | Inductor_SMD:L_0402_1005Metric | L11 |
| 1 | 47p | Capacitor_SMD:C_0402_1005Metric | C50 |
| 1 | 5.6p | Capacitor_SMD:C_0402_1005Metric | C55 |
| 1 | 51 | Resistor_SMD:R_0402_1005Metric | R38 |
| 1 | 560n | Inductor_SMD:L_Changjiang_FXL0420 | L2 |
| 1 | 74HC14 | My_Footprints:SN74HC14DR_D14 | U6 |
| 1 | 8.06k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 88.7k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 9.1n | Inductor_SMD:L_0402_1005Metric | L15 |
| 1 | 91 | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | ABM8-272-T3 | My_Footprints:ABM8-272-T3_ABR | X1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | Conn_01x08_Socket | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J5 |
| 1 | ESD7L5.0DT5G | My_Footprints:SOT-723_0P85X1P25_ONS-L | D2 |
| 1 | IPEX1 | My_Footprints:MHF I_RECE_IPX | J4 |
| 1 | LTST-C190TBKT | My_Footprints:LEDM1608X80_blue | D4 |
| 1 | LTST-C191KFKT | My_Footprints:LEDC1608X55N_orange | D6 |
| 1 | LTST-C193TGKT-5A | My_Footprints:LEDC1608X55N_orange | D5 |
| 1 | LTW-C193DS5-ND | My_Footprints:LEDC1608X35N_red | D3 |
| 1 | MBR0520LT | Diode_SMD:D_SOD-123 | D1 |
| 1 | MCP73812T-420I-OT | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | NX2016SA-32M-EXS00A-CS06465 | My_Footprints:NX2016SA_NDK | X2 |
| 1 | RP2350_60QFN | My_Footprints:RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias_NEW | U1 |
| 1 | TLV3012AIDCKR | My_Footprints:DCK6 | U5 |
| 1 | TPS62811QWRWYRQ1 | My_Footprints:RWY0009A | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | W25Q128JVS | My_Footprints:SOIC_128JVSIQ_WIN | U2 |
| 1 | ~ | My_Footprints:PE4259_RF_SW | U8 |
| 1 | ~ | My_Footprints:SX1262_QFN24_4X4_SEM | U7 |

Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

m1geo/Antenna-Splitter
Simple antenna splitter with SMA connections based around the Mini-Circuits AD4PS-1+





fred314159265/m18-usb-interface
Isolated USB-C adapter for Milwaukee M18 battery diagnostics. KiCad design and v1.0 fab files. Software: m18-protocol-rs.

ThunderSloth/walkin-pir-interface
Battery-Powered PIR Motion Interface (Isolated Dry Contact)
It measures 68.9 × 112.1 mm and has 4 copper layers, 1.61 mm thick.
151 parts, built around the TPS62811QWRWYRQ1, W25Q128JVSIQ, DMP1045U-7(ES) and 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Stefan1623/VoidLink_Hardware repository on GitHub, at the commit this page was made from: the board is RP2350_V2/RP2350_V2.kicad_pcb and its schematic RP2350_V1/RP2350_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Stefan1623 before reusing the design.